[PATCH v4 1/2] drm: Add writeback_dest_x,y,w,h properties
Liviu Dudau
Liviu.Dudau at arm.com
Thu May 2 16:21:44 UTC 2019
On Thu, May 02, 2019 at 05:10:09PM +0100, Ben Davis wrote:
> Add new properties to specify x,y coordinates and
> width and height for writeback.
>
> These are reset to 0 on duplicating state to provide
> robustness against accidental scaling.
>
> Signed-off-by: Ben Davis <ben.davis at arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau at arm.com>
Best regards,
Liviu
> ---
> drivers/gpu/drm/drm_atomic_state_helper.c | 6 +++
> drivers/gpu/drm/drm_atomic_uapi.c | 17 ++++++++
> drivers/gpu/drm/drm_writeback.c | 66 +++++++++++++++++++++++++++++++
> include/drm/drm_connector.h | 23 +++++++++++
> include/drm/drm_mode_config.h | 20 ++++++++++
> 5 files changed, 132 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c b/drivers/gpu/drm/drm_atomic_state_helper.c
> index 25a95b9..5973ca3 100644
> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
> @@ -382,6 +382,12 @@ __drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,
>
> /* Don't copy over a writeback job, they are used only once */
> state->writeback_job = NULL;
> +
> + /* Auto clear writeback coordinates, should only be used once */
> + state->writeback_dest_x = 0;
> + state->writeback_dest_y = 0;
> + state->writeback_dest_w = 0;
> + state->writeback_dest_h = 0;
> }
> EXPORT_SYMBOL(__drm_atomic_helper_connector_duplicate_state);
>
> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
> index d520a04..7d3fb7f 100644
> --- a/drivers/gpu/drm/drm_atomic_uapi.c
> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
> @@ -765,6 +765,14 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
> return -EINVAL;
> }
> state->content_protection = val;
> + } else if (property == config->prop_writeback_dest_x) {
> + state->writeback_dest_x = val;
> + } else if (property == config->prop_writeback_dest_y) {
> + state->writeback_dest_y = val;
> + } else if (property == config->prop_writeback_dest_w) {
> + state->writeback_dest_w = val;
> + } else if (property == config->prop_writeback_dest_h) {
> + state->writeback_dest_h = val;
> } else if (property == config->writeback_fb_id_property) {
> struct drm_framebuffer *fb = drm_framebuffer_lookup(dev, NULL, val);
> int ret = drm_atomic_set_writeback_fb_for_connector(state, fb);
> @@ -837,6 +845,15 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
> *val = state->scaling_mode;
> } else if (property == connector->content_protection_property) {
> *val = state->content_protection;
> + } else if (property == config->prop_writeback_dest_x) {
> + /* Auto clear wb co-ordinates to prevent accidental scaling */
> + *val = 0;
> + } else if (property == config->prop_writeback_dest_y) {
> + *val = 0;
> + } else if (property == config->prop_writeback_dest_w) {
> + *val = 0;
> + } else if (property == config->prop_writeback_dest_h) {
> + *val = 0;
> } else if (property == config->writeback_fb_id_property) {
> /* Writeback framebuffer is one-shot, write and forget */
> *val = 0;
> diff --git a/drivers/gpu/drm/drm_writeback.c b/drivers/gpu/drm/drm_writeback.c
> index c20e6fe..7c53abd 100644
> --- a/drivers/gpu/drm/drm_writeback.c
> +++ b/drivers/gpu/drm/drm_writeback.c
> @@ -74,6 +74,30 @@
> * applications making use of writeback connectors *always* retrieve an
> * out-fence for the commit and use it appropriately.
> * From userspace, this property will always read as zero.
> + *
> + * "WRITEBACK_DEST_X":
> + * The x-coordinate to write back onto the output writeback framebuffer.
> + * 0 acts as default. If non-zero the composition will be translated
> + * horizontally in the buffer by the amount specified. This is the case
> + * even if not scaling on writeback.
> + *
> + * "WRITEBACK_DEST_Y":
> + * The y-coordinate to write back onto the output writeback framebuffer.
> + * 0 acts as default. If non-zero the composition will be translated
> + * vertically in the buffer by the amount specified. This is the case even
> + * if not scaling on writeback.
> + *
> + * "WRITEBACK_DEST_W":
> + * The width of the composition to write back. 0 acts as default. If
> + * non-zero the composition will be scaled to match the given width.
> + * If scaling both WRITEBACK_DEST_W and WRITEBACK_DEST_H should be
> + * set as non-zero.
> + *
> + * "WRITEBACK_DEST_H":
> + * The height of the composition to write back. 0 acts as default. If
> + * non-zero the composition will be scaled to match the given height.
> + * If scaling both WRITEBACK_DEST_W and WRITEBACK_DEST_H should be
> + * set as non-zero.
> */
>
> #define fence_to_wb_connector(x) container_of(x->lock, \
> @@ -141,6 +165,38 @@ static int create_writeback_properties(struct drm_device *dev)
> dev->mode_config.writeback_out_fence_ptr_property = prop;
> }
>
> + if (!dev->mode_config.prop_writeback_dest_x) {
> + prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
> + "WRITEBACK_DEST_X", 0, UINT_MAX);
> + if (!prop)
> + return -ENOMEM;
> + dev->mode_config.prop_writeback_dest_x = prop;
> + }
> +
> + if (!dev->mode_config.prop_writeback_dest_y) {
> + prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
> + "WRITEBACK_DEST_Y", 0, UINT_MAX);
> + if (!prop)
> + return -ENOMEM;
> + dev->mode_config.prop_writeback_dest_y = prop;
> + }
> +
> + if (!dev->mode_config.prop_writeback_dest_w) {
> + prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
> + "WRITEBACK_DEST_W", 0, UINT_MAX);
> + if (!prop)
> + return -ENOMEM;
> + dev->mode_config.prop_writeback_dest_w = prop;
> + }
> +
> + if (!dev->mode_config.prop_writeback_dest_h) {
> + prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
> + "WRITEBACK_DEST_H", 0, UINT_MAX);
> + if (!prop)
> + return -ENOMEM;
> + dev->mode_config.prop_writeback_dest_h = prop;
> + }
> +
> return 0;
> }
>
> @@ -225,6 +281,16 @@ int drm_writeback_connector_init(struct drm_device *dev,
> drm_object_attach_property(&connector->base,
> config->writeback_pixel_formats_property,
> blob->base.id);
> +
> + drm_object_attach_property(&connector->base,
> + config->prop_writeback_dest_x, 0);
> + drm_object_attach_property(&connector->base,
> + config->prop_writeback_dest_y, 0);
> + drm_object_attach_property(&connector->base,
> + config->prop_writeback_dest_w, 0);
> + drm_object_attach_property(&connector->base,
> + config->prop_writeback_dest_h, 0);
> +
> wb_connector->pixel_formats_blob_ptr = blob;
>
> return 0;
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 8fe22ab..4c7701e 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -515,6 +515,25 @@ struct drm_connector_state {
> */
> struct drm_writeback_job *writeback_job;
>
> + /** @writeback_dest_x: x coord to write plane to on wb buffer
> + * The written back composition will be translated by this
> + * amount horizontally on the output buffer.
> + */
> + /** @writeback_dest_y: y coord to write plane to on wb buffer
> + * The written back composition will be translated by this
> + * amount vertically on the output buffer.
> + */
> + /** @writeback_dest_w: width of plane to write to wb buffer
> + * The written back composition will be scaled to match this
> + * height dimension on the output buffer. Ignored if 0.
> + */
> + /** @writeback_dest_h: height of plane to write to wb buffer
> + * The written back composition will be scaled to match this
> + * width dimension on the output buffer. Ignored if 0.
> + */
> + uint32_t writeback_dest_x, writeback_dest_y,
> + writeback_dest_w, writeback_dest_h;
> +
> /**
> * @max_requested_bpc: Connector property to limit the maximum bit
> * depth of the pixels.
> @@ -704,6 +723,10 @@ struct drm_connector_funcs {
> * cleaned up by calling the @atomic_destroy_state hook in this
> * structure.
> *
> + * State relating to writeback including writeback_job and
> + * writeback_dest_x,y,w,h is not intended to be reused and so will not
> + * be duplicated and will instead be reset to NULL/0 respectively.
> + *
> * This callback is mandatory for atomic drivers.
> *
> * Atomic drivers which don't subclass &struct drm_connector_state should use
> diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
> index 7f60e8e..40ce4a8 100644
> --- a/include/drm/drm_mode_config.h
> +++ b/include/drm/drm_mode_config.h
> @@ -622,6 +622,26 @@ struct drm_mode_config {
> */
> struct drm_property *prop_crtc_h;
> /**
> + * @prop_writeback_dest_x: Writeback connector property for the crtc
> + * output destination position in the writeback buffer.
> + */
> + struct drm_property *prop_writeback_dest_x;
> + /**
> + * @prop_writeback_dest_y: Writeback connector property for the crtc
> + * output destination position in the writeback buffer.
> + */
> + struct drm_property *prop_writeback_dest_y;
> + /**
> + * @prop_writeback_dest_w: Writeback connector property for the crtc
> + * output destination position in the writeback buffer.
> + */
> + struct drm_property *prop_writeback_dest_w;
> + /**
> + * @prop_writeback_dest_h: Writeback connector property for the crtc
> + * output destination position in the writeback buffer.
> + */
> + struct drm_property *prop_writeback_dest_h;
> + /**
> * @prop_fb_id: Default atomic plane property to specify the
> * &drm_framebuffer.
> */
> --
> 2.7.4
>
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
More information about the dri-devel
mailing list