[PATCH RFC 4/6] ARM: dts: msm8974: add display support

[Bjorn Andersson]

On Sun 05 May 06:04 PDT 2019, Brian Masney wrote:
> diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
[..]
> +			dsi0: dsi at fd922800 {
> +				status = "disabled";
> +
> +				compatible = "qcom,mdss-dsi-ctrl";
> +				reg = <0xfd922800 0x1f8>;
> +				reg-names = "dsi_ctrl";
> +
> +				interrupt-parent = <&mdss>;
> +				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
> +
> +				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
> +				                  <&mmcc PCLK0_CLK_SRC>;
> +				assigned-clock-parents = <&dsi_phy0 0>,
> +				                         <&dsi_phy0 1>;
> +
> +				clocks = <&mmcc MDSS_MDP_CLK>,
> +				         <&mmcc MDSS_AHB_CLK>,
> +				         <&mmcc MDSS_AXI_CLK>,
> +				         <&mmcc MDSS_BYTE0_CLK>,
> +				         <&mmcc MDSS_PCLK0_CLK>,
> +				         <&mmcc MDSS_ESC0_CLK>,
> +				         <&mmcc MMSS_MISC_AHB_CLK>;
> +				clock-names = "mdp_core",
> +				              "iface",
> +				              "bus",
> +				              "byte",
> +				              "pixel",
> +				              "core",
> +				              "core_mmss";

Unless I enable MMSS_MMSSNOC_AXI_CLK and MMSS_S0_AXI_CLK I get some
underrun error from DSI. You don't see anything like this?

(These clocks are controlled by msm_bus downstream and should be driven
by interconnect upstream)


Apart from this, I think this looks nice. Happy to see the progress.

Regards,
Bjorn