[PATCH v2 3/4] arm64: DTS: allwinner: a64: Enable audio on Teres-I

[Torsten Duwe]

From: Harald Geyer <harald at ccbib.org>

The TERES-I has internal speakers (left, right), internal microphone
and a headset combo jack (headphones + mic), "CTIA" (android) pinout.

The headphone and mic detect lines of the A64 are connected properly,
but AFAIK currently unsupported by the driver.

Signed-off-by: Harald Geyer <harald at ccbib.org>
Signed-off-by: Torsten Duwe <duwe at suse.de>
---
 .../boot/dts/allwinner/sun50i-a64-teres-i.dts | 53 +++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index f9eede0a8bd3..d57049fbdaca 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -70,6 +70,25 @@
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&r_pio 0 12 GPIO_ACTIVE_HIGH>; /* PL12 */
+		sound-name-prefix = "Speaker Amp";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
 };
 
 &ehci1 {
@@ -258,6 +286,29 @@
 	vcc-hdmi-supply = <&reg_dldo1>;
 };
 
+&sound {
+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+	simple-audio-card,widgets = "Headphone", "Headphone Jack",
+				    "Microphone", "Headset Microphone",
+				    "Microphone", "Internal Microphone",
+				    "Speaker", "Internal Speaker";
+	simple-audio-card,routing =
+			"Left DAC", "AIF1 Slot 0 Left",
+			"Right DAC", "AIF1 Slot 0 Right",
+			"AIF1 Slot 0 Left ADC", "Left ADC",
+			"AIF1 Slot 0 Right ADC", "Right ADC",
+			"Headphone Jack", "HP",
+			"Speaker Amp INL", "LINEOUT",
+			"Speaker Amp INR", "LINEOUT",
+			"Internal Speaker", "Speaker Amp OUTL",
+			"Internal Speaker", "Speaker Amp OUTR",
+			"Internal Microphone", "MBIAS",
+			"MIC1", "Internal Microphone",
+			"Headset Microphone", "HBIAS",
+			"MIC2", "Headset Microphone";
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pb_pins>;