[PATCH 1/2] drm/komeda: Add komeda_fb_check_src_coords

[james qian wang (Arm Technology China)]

Add komeda_fb_check_src_coords and check if the layer configured src
rect can meet the requirement of fb and fb format.

Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang at arm.com>
---
 .../arm/display/komeda/komeda_framebuffer.c   | 21 ++++++++++++
 .../arm/display/komeda/komeda_framebuffer.h   |  2 ++
 .../display/komeda/komeda_pipeline_state.c    | 34 +++++++++++++------
 3 files changed, 46 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c b/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c
index 360ab701a88b..dd4232d13b27 100644
--- a/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c
@@ -213,6 +213,27 @@ komeda_fb_create(struct drm_device *dev, struct drm_file *file,
 	return ERR_PTR(ret);
 }
 
+int komeda_fb_check_src_coords(const struct komeda_fb *kfb,
+			       u32 src_x, u32 src_y, u32 src_w, u32 src_h)
+{
+	const struct drm_framebuffer *fb = &kfb->base;
+	const struct drm_format_info *info = fb->format;
+
+	if ((src_x + src_w > fb->width) || (src_y + src_h > fb->height)) {
+		DRM_DEBUG_ATOMIC("Invalid source coordinate.\n");
+		return -EINVAL;
+	}
+
+	if ((src_x % info->hsub) || (src_w % info->hsub) ||
+	    (src_y % info->vsub) || (src_h % info->vsub)) {
+		DRM_DEBUG_ATOMIC("Wrong subsampling dimension x:%d, y:%d, w:%d, h:%d for format: %x.\n",
+				 src_x, src_y, src_w, src_h, info->format);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 dma_addr_t
 komeda_fb_get_pixel_addr(struct komeda_fb *kfb, int x, int y, int plane)
 {
diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.h b/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.h
index f4046e2e6f74..c61ca98a3a63 100644
--- a/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.h
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.h
@@ -38,6 +38,8 @@ struct komeda_fb {
 struct drm_framebuffer *
 komeda_fb_create(struct drm_device *dev, struct drm_file *file,
 		const struct drm_mode_fb_cmd2 *mode_cmd);
+int komeda_fb_check_src_coords(const struct komeda_fb *kfb,
+			       u32 src_x, u32 src_y, u32 src_w, u32 src_h);
 dma_addr_t
 komeda_fb_get_pixel_addr(struct komeda_fb *kfb, int x, int y, int plane);
 bool komeda_fb_is_layer_supported(struct komeda_fb *kfb, u32 layer_type,
diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
index d3f414fc3956..fcd34164b3c2 100644
--- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
@@ -269,21 +269,33 @@ komeda_component_get_avail_scaler(struct komeda_component *c,
 
 static int
 komeda_layer_check_cfg(struct komeda_layer *layer,
-		       struct komeda_plane_state *kplane_st,
+		       struct komeda_fb *kfb,
 		       struct komeda_data_flow_cfg *dflow)
 {
-	struct komeda_fb *kfb = to_kfb(kplane_st->base.fb);
+	u32 hsize_in, vsize_in;
 
 	if (!komeda_fb_is_layer_supported(kfb, layer->layer_type, dflow->rot))
 		return -EINVAL;
 
-	if (!in_range(&layer->hsize_in, dflow->in_w)) {
-		DRM_DEBUG_ATOMIC("src_w: %d is out of range.\n", dflow->in_w);
+	if (komeda_fb_check_src_coords(kfb, dflow->in_x, dflow->in_y,
+				       dflow->in_w, dflow->in_h))
+		return -EINVAL;
+
+	if (layer->base.id == KOMEDA_COMPONENT_WB_LAYER) {
+		hsize_in = dflow->out_w;
+		vsize_in = dflow->out_h;
+	} else {
+		hsize_in = dflow->in_w;
+		vsize_in = dflow->in_h;
+	}
+
+	if (!in_range(&layer->hsize_in, hsize_in)) {
+		DRM_DEBUG_ATOMIC("invalidate src_w %d.\n", hsize_in);
 		return -EINVAL;
 	}
 
-	if (!in_range(&layer->vsize_in, dflow->in_h)) {
-		DRM_DEBUG_ATOMIC("src_h: %d is out of range.\n", dflow->in_h);
+	if (!in_range(&layer->vsize_in, vsize_in)) {
+		DRM_DEBUG_ATOMIC("invalidate src_h %d.\n", vsize_in);
 		return -EINVAL;
 	}
 
@@ -302,7 +314,7 @@ komeda_layer_validate(struct komeda_layer *layer,
 	struct komeda_layer_state *st;
 	int i, err;
 
-	err = komeda_layer_check_cfg(layer, kplane_st, dflow);
+	err = komeda_layer_check_cfg(layer, kfb, dflow);
 	if (err)
 		return err;
 
@@ -360,11 +372,11 @@ komeda_wb_layer_validate(struct komeda_layer *wb_layer,
 	struct komeda_fb *kfb = to_kfb(conn_st->writeback_job->fb);
 	struct komeda_component_state *c_st;
 	struct komeda_layer_state *st;
-	int i;
+	int i, err;
 
-	if (!komeda_fb_is_layer_supported(kfb, wb_layer->layer_type,
-					  dflow->rot))
-		return -EINVAL;
+	err = komeda_layer_check_cfg(wb_layer, kfb, dflow);
+	if (err)
+		return err;
 
 	c_st = komeda_component_get_state_and_set_user(&wb_layer->base,
 			conn_st->state, conn_st->connector, conn_st->crtc);
-- 
2.17.1