[PATCH v9 0/6] drm/i915/dp: Support for DP YCbCr4:2:0 outputs

[Jani Nikula]

On Tue, 21 May 2019, Gwan-gyeong Mun <gwan-gyeong.mun at intel.com> wrote:
> On Gen 11 platform, to enable resolutions like 5K at 120 (or higher) we need
> to use DSC (DP 1.4) or YCbCr4:2:0 (DP 1.3 or 1.4) on DP.
> In order to support YCbCr4:2:0 on DP we need to program YCBCR 4:2:0
> to MSA and VSC SDP.
> And Link M/N values are calculated and applied based on the Full Clock
> forYCbCr420.
> The Bit per Pixel needs to be adjusted for YUV420 mode as it requires only
> half of the RGB case.
>  - Link M/N values are calculated and applied based on the Full Clock
>  - Data M/N values needs to be calculated considering the data is half
>    due to subsampling
>
> These patches add a VSC structure for handling Pixel Encoding/Colorimetry
> Formats and program YCBCR 4:2:0 to MSA and VSC SDP. And it changes a link
> bandwidth computation for DP.

Thanks for the patches, pushed to dinq with Laurent's and Maarten's acks
to queue patch 2 via drm-intel.

BR,
Jani.


-- 
Jani Nikula, Intel Open Source Graphics Center