[PATCH v1 2/2] drm/stm: dsi: add power on/off phy ops

[Yannick Fertré]

These new physical operations are helpful to power_on/off the dsi
wrapper. If the dsi wrapper is powered in video mode, the display
controller (ltdc) register access will hang when DSI fifos are full.

Signed-off-by: Yannick Fertré <yannick.fertre at st.com>
---
 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
index 01db020..0ab32fe 100644
--- a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
+++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
@@ -210,10 +210,27 @@ static int dw_mipi_dsi_phy_init(void *priv_data)
 	if (ret)
 		DRM_DEBUG_DRIVER("!TIMEOUT! waiting PLL, let's continue\n");
 
+	return 0;
+}
+
+static void dw_mipi_dsi_phy_power_on(void *priv_data)
+{
+	struct dw_mipi_dsi_stm *dsi = priv_data;
+
+	DRM_DEBUG_DRIVER("\n");
+
 	/* Enable the DSI wrapper */
 	dsi_set(dsi, DSI_WCR, WCR_DSIEN);
+}
 
-	return 0;
+static void dw_mipi_dsi_phy_power_off(void *priv_data)
+{
+	struct dw_mipi_dsi_stm *dsi = priv_data;
+
+	DRM_DEBUG_DRIVER("\n");
+
+	/* Disable the DSI wrapper */
+	dsi_clear(dsi, DSI_WCR, WCR_DSIEN);
 }
 
 static int
@@ -287,6 +304,8 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
 
 static const struct dw_mipi_dsi_phy_ops dw_mipi_dsi_stm_phy_ops = {
 	.init = dw_mipi_dsi_phy_init,
+	.power_on = dw_mipi_dsi_phy_power_on,
+	.power_off = dw_mipi_dsi_phy_power_off,
 	.get_lane_mbps = dw_mipi_dsi_get_lane_mbps,
 };
 
-- 
2.7.4