[PATCH 6/6] arm64: dts: allwinner: a64: enable ANX6345 bridge on Teres-I

[Torsten Duwe]

On Thu, May 23, 2019 at 07:48:03AM -0700, Vasily Khoruzhick wrote:
> On Wed, May 22, 2019 at 11:54 PM Torsten Duwe <duwe at lst.de> wrote:
> >
> >
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
> > @@ -65,6 +65,21 @@
> >                 };
> >         };
> >
> > +       panel: panel {
> > +               compatible ="innolux,n116bge", "simple-panel";
> 
> IIRC Rob wanted it to be edp-connector, not simple-panel. Also you
> need to introduce edp-connector binding.

This line is identically found in
arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi and
arch/arm64/boot/dts/nvidia/tegra132-norrin.dts

> > +               status = "okay";
> > +               power-supply = <&reg_dcdc1>;
> > +               backlight = <&backlight>;
> > +
> > +               ports {
> > +                       panel_in: port {
> > +                               panel_in_edp: endpoint {
> > +                                       remote-endpoint = <&anx6345_out>;
> > +                               };
> > +                       };
> > +               };

The whole node is the same as in rk3288-veyron-chromebook.dtsi; I only adapted
the power-supply and remote-endpoint properties.

Is there anything wrong with that?

	Torsten