[PATCH v3 07/10] drm: rcar-du: Skip LVDS1 output on Gen3 when using dual-link LVDS mode
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Tue May 28 16:50:52 UTC 2019
Hi Sam,
On Tue, May 28, 2019 at 06:42:13PM +0200, Sam Ravnborg wrote:
> On Tue, May 28, 2019 at 05:12:31PM +0300, Laurent Pinchart wrote:
> > In dual-link LVDS mode, the LVDS1 encoder is used as a companion for
> > LVDS0, and both encoders transmit data from DU0. The LVDS1 output of DU1
> > can't be used in that case, don't create an encoder and connector for
> > it.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> > Reviewed-by: Jacopo Mondi <jacopo+renesas at jmondi.org>
> > Tested-by: Jacopo Mondi <jacopo+renesas at jmondi.org>
> > ---
> > Changess since v2:
> >
> > - Remove unneeded bridge NULL check
> > ---
> > drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 12 ++++++++++++
> > drivers/gpu/drm/rcar-du/rcar_du_kms.c | 2 +-
> > 2 files changed, 13 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
> > index 6c91753af7bc..0f00bdfe2366 100644
> > --- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
> > +++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
> > @@ -16,6 +16,7 @@
> > #include "rcar_du_drv.h"
> > #include "rcar_du_encoder.h"
> > #include "rcar_du_kms.h"
> > +#include "rcar_lvds.h"
> >
> > /* -----------------------------------------------------------------------------
> > * Encoder
> > @@ -97,6 +98,17 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
> > }
> > }
> >
> > + /*
> > + * On Gen3 skip the LVDS1 output if the LVDS1 encoder is used as a
> > + * companion for LVDS0 in dual-link mode.
> > + */
> > + if (rcdu->info->gen >= 3 && output == RCAR_DU_OUTPUT_LVDS1) {
>
> Both subject and comment above says "On Gen3", but the code looks like
> it implements "On Gen3 or newer" - due to use of ">=".
> Looks wrong to me.
Gen3 is the newest generation :-) We thus use >= through the DU and LVDS
drivers to prepare for support of Gen4, just in case.
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list