[linux-sunxi] [PATCH v6 0/6] Add support for Orange Pi 3
Ondřej Jirman
megous at megous.com
Fri May 31 12:52:46 UTC 2019
Hello,
On Mon, May 27, 2019 at 06:22:31PM +0200, megous via linux-sunxi wrote:
> From: Ondrej Jirman <megous at megous.com>
>
> This series implements support for Xunlong Orange Pi 3 board.
>
> Unfortunately, this board needs some small driver patches, so I have
> split the boards DT patch into chunks that require patches for drivers
> in various subsystems.
>
> Suggested merging plan/dependencies:
>
> - stmmac patches are needed for ethernet support (patches 1-3)
> - these should be ready now
> - HDMI support (patches 4-6)
> - should be ready
If there are no futher comments, can all these patches please be merged?
thank you and kind regards,
Ondrej
> Changes in v2:
> - added dt-bindings documentation for the board's compatible string
> (suggested by Clement)
> - addressed checkpatch warnings and code formatting issues (on Maxime's
> suggestions)
> - stmmac: dropped useless parenthesis, reworded description of the patch
> (suggested by Sergei)
> - drop useles dev_info() about the selected io bias voltage
> - docummented io voltage bias selection variant macros
> - wifi: marked WiFi DTS patch and realted mmc1_pins as "DO NOT MERGE",
> because wifi depends on H6 RTC support that's not merged yet (suggested
> by Clement)
> - added missing signed-of-bys
> - changed &usb2otg dr_mode to otg, and added a note about VBUS
> - improved wording of HDMI driver's DDC power supply patch
>
> Changes in v3:
> - dropped already applied patches
> - changed pinctrl I/O bias selection constants to enum and renamed
> - added /omit-if-no-ref/ to mmc1_pins
> - made mmc1_pins default pinconf for mmc1 in H6 dtsi
> - move ddc-supply to HDMI connector node, updated patch descriptions,
> changed dt-bindings docs
>
> Changes in v4:
> - fix checkpatch warnings/style issues
> - use enum in struct sunxi_desc_function for io_bias_cfg_variant
> - collected acked-by's
> - fix compile error in drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c:156
> caused by missing conversion from has_io_bias_cfg struct member
> (I've kept the acked-by, because it's a trivial change, but feel free
> to object.) (reported by Martin A. on github)
> I did not have A80 pinctrl enabled for some reason, so I did not catch
> this sooner.
> - dropped brcm firmware patch (was already applied)
> - dropped the wifi dts patch (will re-send after H6 RTC gets merged,
> along with bluetooth support, in a separate series)
>
> Changes in v5:
> - dropped already applied patches (pinctrl patches, mmc1 pinconf patch)
> - rename GMAC-3V3 -> GMAC-3V to match the schematic (Jagan)
> - changed hdmi-connector's ddc-supply property to ddc-en-gpios
> (Rob Herring)
>
> Changes in v6:
> - added dt-bindings reviewed-by tag
> - fix wording in stmmac commit (as suggested by Sergei)
>
> Please take a look.
>
> thank you and regards,
> Ondrej Jirman
>
> Icenowy Zheng (2):
> net: stmmac: sun8i: add support for Allwinner H6 EMAC
> net: stmmac: sun8i: force select external PHY when no internal one
>
> Ondrej Jirman (4):
> arm64: dts: allwinner: orange-pi-3: Enable ethernet
> dt-bindings: display: hdmi-connector: Support DDC bus enable
> drm: sun4i: Add support for enabling DDC I2C bus to sun8i_dw_hdmi glue
> arm64: dts: allwinner: orange-pi-3: Enable HDMI output
>
> .../display/connector/hdmi-connector.txt | 1 +
> .../dts/allwinner/sun50i-h6-orangepi-3.dts | 70 +++++++++++++++++++
> drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 55 ++++++++++++++-
> drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 3 +
> .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 21 ++++++
> 5 files changed, 147 insertions(+), 3 deletions(-)
>
> --
> 2.21.0
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com.
> To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20190527162237.18495-1-megous%40megous.com.
> For more options, visit https://groups.google.com/d/optout.
More information about the dri-devel
mailing list