[PATCH] drm/mediatek: Support reflect-y plane rotation

Mark Yacoub markyacoub at google.com
Fri Nov 1 14:24:15 UTC 2019


Tested it on my end and confirmed that it works as intended.

On Fri, Nov 1, 2019 at 9:26 AM Sean Paul <sean at poorly.run> wrote:
>
> From: Sean Paul <seanpaul at chromium.org>
>
> Expose the rotation property and handle REFLECT_Y rotations.
>
> Cc: Fritz Koenig <frkoenig at chromium.org>
> Cc: Daniele Castagna <dcastagna at chromium.org>
> Cc: Miguel Casas <mcasas at chromium.org>
> Cc: Mark Yacoub <markyacoub at google.com>
> Signed-off-by: Sean Paul <seanpaul at chromium.org>
> ---
>
> The hardware also supports REFLECT_X, but I just could not figure out
> how to get it working. If someone is interested in getting this going,
> I'm happy to share notes and my WIP patch. For now, though, I actually
> only need y-flip so I'm giving up on x-flip.
>
>
>  drivers/gpu/drm/mediatek/mtk_disp_ovl.c  |  6 ++++++
>  drivers/gpu/drm/mediatek/mtk_drm_plane.c | 11 ++++++++++-
>  drivers/gpu/drm/mediatek/mtk_drm_plane.h |  1 +
>  3 files changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> index 14878ebf59d7..6505479ee506 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> @@ -50,6 +50,7 @@
>                                         OVL_CON_CLRFMT_RGB : 0)
>  #define        OVL_CON_AEN             BIT(8)
>  #define        OVL_CON_ALPHA           0xff
> +#define        OVL_CON_VIRT_FLIP       BIT(9)
>
>  struct mtk_disp_ovl_data {
>         unsigned int addr;
> @@ -229,6 +230,11 @@ static void mtk_ovl_layer_config(struct mtk_ddp_comp *comp, unsigned int idx,
>         if (idx != 0)
>                 con |= OVL_CON_AEN | OVL_CON_ALPHA;
>
> +       if (pending->rotation & DRM_MODE_REFLECT_Y) {
> +               con |= OVL_CON_VIRT_FLIP;
> +               addr += (pending->height - 1) * pending->pitch;
> +       }
> +
>         writel_relaxed(con, comp->regs + DISP_REG_OVL_CON(idx));
>         writel_relaxed(pitch, comp->regs + DISP_REG_OVL_PITCH(idx));
>         writel_relaxed(src_size, comp->regs + DISP_REG_OVL_SRC_SIZE(idx));
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> index 584a9ecadce6..4d8f2b55334b 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> @@ -88,6 +88,9 @@ static int mtk_plane_atomic_check(struct drm_plane *plane,
>         if (!fb)
>                 return 0;
>
> +       if (fb->format->is_yuv && (state->rotation & ~DRM_MODE_ROTATE_0) != 0)
> +               return -EINVAL;
> +
>         if (!state->crtc)
>                 return 0;
>
> @@ -132,6 +135,7 @@ static void mtk_plane_atomic_update(struct drm_plane *plane,
>         state->pending.y = plane->state->dst.y1;
>         state->pending.width = drm_rect_width(&plane->state->dst);
>         state->pending.height = drm_rect_height(&plane->state->dst);
> +       state->pending.rotation = plane->state->rotation;
>         wmb(); /* Make sure the above parameters are set before update */
>         state->pending.dirty = true;
>  }
> @@ -166,7 +170,12 @@ int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
>                 return err;
>         }
>
> -       drm_plane_helper_add(plane, &mtk_plane_helper_funcs);
> +       err = drm_plane_create_rotation_property(plane, 0,
> +                                                DRM_MODE_ROTATE_0 |
> +                                                DRM_MODE_REFLECT_Y);
> +       if (err)
> +               DRM_INFO("Create rotation property failed, continuing...\n");
>
> +       drm_plane_helper_add(plane, &mtk_plane_helper_funcs);
>         return 0;
>  }
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.h b/drivers/gpu/drm/mediatek/mtk_drm_plane.h
> index 6f842df722c7..83b634a997cc 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_plane.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.h
> @@ -20,6 +20,7 @@ struct mtk_plane_pending_state {
>         unsigned int                    y;
>         unsigned int                    width;
>         unsigned int                    height;
> +       unsigned int                    rotation;
>         bool                            dirty;
>  };
>
> --
> Sean Paul, Software Engineer, Google / Chromium OS
>


More information about the dri-devel mailing list