[PATCH v2 4/7] drm/mediatek: Plumb supported rotation values from components to plane init
Sean Paul
sean at poorly.run
Tue Nov 5 21:10:21 UTC 2019
From: Sean Paul <seanpaul at chromium.org>
This patch adds the ability for components to expose supported rotations
which will be exposed to userspace via a plane rotation property.
No functional changes in this patch.
Signed-off-by: Sean Paul <seanpaul at chromium.org>
---
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 4 +++-
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 10 ++++++++++
drivers/gpu/drm/mediatek/mtk_drm_plane.c | 12 +++++++++++-
drivers/gpu/drm/mediatek/mtk_drm_plane.h | 4 +++-
4 files changed, 27 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 04e7e4bdbdb5..f80a8ba75977 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -600,13 +600,15 @@ static int mtk_drm_crtc_init_comp_planes(struct drm_device *drm_dev,
int comp_idx, int pipe)
{
int num_planes = mtk_drm_crtc_num_comp_planes(mtk_crtc, comp_idx);
+ struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[comp_idx];
int i, ret;
for (i = 0; i < num_planes; i++) {
ret = mtk_plane_init(drm_dev,
&mtk_crtc->planes[mtk_crtc->layer_nr],
BIT(pipe),
- mtk_drm_crtc_plane_type(mtk_crtc->layer_nr));
+ mtk_drm_crtc_plane_type(mtk_crtc->layer_nr),
+ mtk_ddp_comp_supported_rotations(comp));
if (ret)
return ret;
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index 3de371e28bdf..2f1e9e75b8da 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -77,6 +77,7 @@ struct mtk_ddp_comp_funcs {
void (*stop)(struct mtk_ddp_comp *comp);
void (*enable_vblank)(struct mtk_ddp_comp *comp, struct drm_crtc *crtc);
void (*disable_vblank)(struct mtk_ddp_comp *comp);
+ unsigned int (*supported_rotations)(struct mtk_ddp_comp *comp);
unsigned int (*layer_nr)(struct mtk_ddp_comp *comp);
void (*layer_on)(struct mtk_ddp_comp *comp, unsigned int idx);
void (*layer_off)(struct mtk_ddp_comp *comp, unsigned int idx);
@@ -133,6 +134,15 @@ static inline void mtk_ddp_comp_disable_vblank(struct mtk_ddp_comp *comp)
comp->funcs->disable_vblank(comp);
}
+static inline
+unsigned int mtk_ddp_comp_supported_rotations(struct mtk_ddp_comp *comp)
+{
+ if (comp->funcs && comp->funcs->supported_rotations)
+ return comp->funcs->supported_rotations(comp);
+
+ return 0;
+}
+
static inline unsigned int mtk_ddp_comp_layer_nr(struct mtk_ddp_comp *comp)
{
if (comp->funcs && comp->funcs->layer_nr)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
index 58b02fffe321..cd7c97eb7ee6 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
@@ -138,6 +138,7 @@ static void mtk_plane_atomic_update(struct drm_plane *plane,
state->pending.y = plane->state->dst.y1;
state->pending.width = drm_rect_width(&plane->state->dst);
state->pending.height = drm_rect_height(&plane->state->dst);
+ state->pending.rotation = plane->state->rotation;
wmb(); /* Make sure the above parameters are set before update */
state->pending.dirty = true;
}
@@ -160,7 +161,8 @@ static const struct drm_plane_helper_funcs mtk_plane_helper_funcs = {
};
int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
- unsigned long possible_crtcs, enum drm_plane_type type)
+ unsigned long possible_crtcs, enum drm_plane_type type,
+ unsigned int supported_rotations)
{
int err;
@@ -172,6 +174,14 @@ int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
return err;
}
+ if (supported_rotations & ~DRM_MODE_ROTATE_0) {
+ err = drm_plane_create_rotation_property(plane,
+ DRM_MODE_ROTATE_0,
+ supported_rotations);
+ if (err)
+ DRM_INFO("Create rotation property failed\n");
+ }
+
drm_plane_helper_add(plane, &mtk_plane_helper_funcs);
return 0;
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.h b/drivers/gpu/drm/mediatek/mtk_drm_plane.h
index 6f842df722c7..760885e35b27 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_plane.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.h
@@ -20,6 +20,7 @@ struct mtk_plane_pending_state {
unsigned int y;
unsigned int width;
unsigned int height;
+ unsigned int rotation;
bool dirty;
};
@@ -35,6 +36,7 @@ to_mtk_plane_state(struct drm_plane_state *state)
}
int mtk_plane_init(struct drm_device *dev, struct drm_plane *plane,
- unsigned long possible_crtcs, enum drm_plane_type type);
+ unsigned long possible_crtcs, enum drm_plane_type type,
+ unsigned int supported_rotations);
#endif
--
Sean Paul, Software Engineer, Google / Chromium OS
More information about the dri-devel
mailing list