[PATCH 8/9] drm/ast: Add cursor plane
Daniel Vetter
daniel at ffwll.ch
Wed Nov 6 09:05:10 UTC 2019
On Wed, Nov 6, 2019 at 9:31 AM Thomas Zimmermann <tzimmermann at suse.de> wrote:
>
> Hi
>
> Am 05.11.19 um 10:55 schrieb Daniel Vetter:
> > On Mon, Oct 28, 2019 at 04:49:27PM +0100, Thomas Zimmermann wrote:
> >> The cursor plane uses an internal format of ARGB4444. To userspace, we
> >> announce ARGB8888 and do the transformation internally.
> >>
> >> Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
> >
> > Hm, might be fun to also expose the ARGB4444 directly. Not that anyone
> > will actually use it :-/
>
> Is that a serious proposal? I thought about ARGB4444 and quickly
> dismissed it because no one will ever support it anyway.
For cursor maybe not, but in other cases where we added the
RGB8888->native format hack because userspace, we did make sure that
the driver exposes the native formats too. Up to you really.
-Daniel
>
> Best regards
> Thomas
>
> > -Daniel
> >
> >> ---
> >> drivers/gpu/drm/ast/ast_drv.h | 1 +
> >> drivers/gpu/drm/ast/ast_mode.c | 161 ++++++++++++++++++++++++++++++++-
> >> 2 files changed, 161 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/gpu/drm/ast/ast_drv.h b/drivers/gpu/drm/ast/ast_drv.h
> >> index 13560622f22a..49557a73390f 100644
> >> --- a/drivers/gpu/drm/ast/ast_drv.h
> >> +++ b/drivers/gpu/drm/ast/ast_drv.h
> >> @@ -122,6 +122,7 @@ struct ast_private {
> >> } cursor;
> >>
> >> struct drm_plane primary_plane;
> >> + struct drm_plane cursor_plane;
> >>
> >> bool support_wide_screen;
> >> enum {
> >> diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
> >> index 7667f4502eb9..f5f73200e8e4 100644
> >> --- a/drivers/gpu/drm/ast/ast_mode.c
> >> +++ b/drivers/gpu/drm/ast/ast_mode.c
> >> @@ -54,6 +54,16 @@ static int ast_cursor_move(struct drm_crtc *crtc,
> >> int x, int y);
> >>
> >>
> >> +static u32 copy_cursor_image(u8 *src, u8 *dst, int width, int height);
> >> +static int ast_cursor_update(void *dst, void *src, unsigned int width,
> >> + unsigned int height);
> >> +static void ast_cursor_set_base(struct ast_private *ast, u64 address);
> >> +static int ast_show_cursor(struct drm_crtc *crtc, void *src,
> >> + unsigned int width, unsigned int height);
> >> +static void ast_hide_cursor(struct drm_crtc *crtc);
> >> +static int ast_cursor_move(struct drm_crtc *crtc,
> >> + int x, int y);
> >> +
> >> static inline void ast_load_palette_index(struct ast_private *ast,
> >> u8 index, u8 red, u8 green,
> >> u8 blue)
> >> @@ -594,6 +604,139 @@ static const struct drm_plane_funcs ast_primary_plane_funcs = {
> >> .format_mod_supported = NULL,
> >> };
> >>
> >> +/*
> >> + * Cursor plane
> >> + */
> >> +
> >> +static int
> >> +ast_cursor_plane_helper_prepare_fb(struct drm_plane *plane,
> >> + struct drm_plane_state *new_state)
> >> +{
> >> + struct drm_framebuffer *fb = new_state->fb;
> >> + struct drm_crtc *crtc = new_state->crtc;
> >> + struct drm_gem_vram_object *gbo;
> >> + struct ast_private *ast;
> >> + int ret;
> >> + void *src, *dst;
> >> +
> >> + if (!crtc || !fb)
> >> + return 0;
> >> +
> >> + if (fb->width > AST_MAX_HWC_WIDTH || fb->height > AST_MAX_HWC_HEIGHT)
> >> + return -EINVAL;
> >> +
> >> + ast = crtc->dev->dev_private;
> >> +
> >> + gbo = drm_gem_vram_of_gem(fb->obj[0]);
> >> + src = drm_gem_vram_vmap(gbo);
> >> + if (IS_ERR(src)) {
> >> + ret = PTR_ERR(src);
> >> + goto err_drm_gem_vram_unpin;
> >> + }
> >> +
> >> + dst = drm_gem_vram_vmap(ast->cursor.gbo[ast->cursor.next_index]);
> >> + if (IS_ERR(dst)) {
> >> + ret = PTR_ERR(dst);
> >> + goto err_drm_gem_vram_vunmap_src;
> >> + }
> >> +
> >> + ret = ast_cursor_update(dst, src, fb->width, fb->height);
> >> + if (ret)
> >> + goto err_drm_gem_vram_vunmap_dst;
> >> +
> >> + /* Always unmap buffers here. Destination buffers are
> >> + * perma-pinned while the driver is active. We're only
> >> + * changing ref-counters here.
> >> + */
> >> + drm_gem_vram_vunmap(ast->cursor.gbo[ast->cursor.next_index], dst);
> >> + drm_gem_vram_vunmap(gbo, src);
> >> +
> >> + return 0;
> >> +
> >> +err_drm_gem_vram_vunmap_dst:
> >> + drm_gem_vram_vunmap(ast->cursor.gbo[ast->cursor.next_index], dst);
> >> +err_drm_gem_vram_vunmap_src:
> >> + drm_gem_vram_vunmap(gbo, src);
> >> +err_drm_gem_vram_unpin:
> >> + drm_gem_vram_unpin(gbo);
> >> + return ret;
> >> +}
> >> +
> >> +static int ast_cursor_plane_helper_atomic_check(struct drm_plane *plane,
> >> + struct drm_plane_state *state)
> >> +{
> >> + return 0;
> >> +}
> >> +
> >> +static void
> >> +ast_cursor_plane_helper_atomic_update(struct drm_plane *plane,
> >> + struct drm_plane_state *old_state)
> >> +{
> >> + struct drm_plane_state *state = plane->state;
> >> + struct drm_crtc *crtc = state->crtc;
> >> + struct drm_framebuffer *fb = state->fb;
> >> + struct ast_private *ast = plane->dev->dev_private;
> >> + struct ast_crtc *ast_crtc = to_ast_crtc(crtc);
> >> + struct drm_gem_vram_object *gbo;
> >> + s64 off;
> >> + u8 jreg;
> >> +
> >> + ast_crtc->offset_x = AST_MAX_HWC_WIDTH - fb->width;
> >> + ast_crtc->offset_y = AST_MAX_HWC_WIDTH - fb->height;
> >> +
> >> + if (state->fb != old_state->fb) {
> >> + /* A new cursor image was installed. */
> >> + gbo = ast->cursor.gbo[ast->cursor.next_index];
> >> + off = drm_gem_vram_offset(gbo);
> >> + if (WARN_ON_ONCE(off < 0))
> >> + return; /* Bug: we didn't pin cursor HW BO to VRAM. */
> >> + ast_cursor_set_base(ast, off);
> >> +
> >> + ++ast->cursor.next_index;
> >> + ast->cursor.next_index %= ARRAY_SIZE(ast->cursor.gbo);
> >> + }
> >> +
> >> + ast_cursor_move(crtc, state->crtc_x, state->crtc_y);
> >> +
> >> + jreg = 0x2;
> >> + /* enable ARGB cursor */
> >> + jreg |= 1;
> >> + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xcb, 0xfc, jreg);
> >> +}
> >> +
> >> +static void
> >> +ast_cursor_plane_helper_atomic_disable(struct drm_plane *plane,
> >> + struct drm_plane_state *old_state)
> >> +{
> >> + struct ast_private *ast = plane->dev->dev_private;
> >> +
> >> + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xcb, 0xfc, 0x00);
> >> +}
> >> +
> >> +static const struct drm_plane_helper_funcs ast_cursor_plane_helper_funcs = {
> >> + .prepare_fb = ast_cursor_plane_helper_prepare_fb,
> >> + .cleanup_fb = NULL, /* not required for cursor plane */
> >> + .atomic_check = ast_cursor_plane_helper_atomic_check,
> >> + .atomic_update = ast_cursor_plane_helper_atomic_update,
> >> + .atomic_disable = ast_cursor_plane_helper_atomic_disable,
> >> +};
> >> +
> >> +static const struct drm_plane_funcs ast_cursor_plane_funcs = {
> >> + .update_plane = drm_atomic_helper_update_plane,
> >> + .disable_plane = drm_atomic_helper_disable_plane,
> >> + .destroy = drm_plane_cleanup,
> >> + .reset = drm_atomic_helper_plane_reset,
> >> + .set_property = NULL,
> >> + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
> >> + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
> >> + .atomic_set_property = NULL,
> >> + .atomic_get_property = NULL,
> >> + .late_register = NULL,
> >> + .early_unregister = NULL,
> >> + .atomic_print_state = NULL,
> >> + .format_mod_supported = NULL,
> >> +};
> >> +
> >> /*
> >> * CRTC
> >> */
> >> @@ -883,7 +1026,8 @@ static int ast_crtc_init(struct drm_device *dev)
> >> return -ENOMEM;
> >>
> >> ret = drm_crtc_init_with_planes(dev, &crtc->base, &ast->primary_plane,
> >> - NULL, &ast_crtc_funcs, NULL);
> >> + &ast->cursor_plane, &ast_crtc_funcs,
> >> + NULL);
> >> if (ret)
> >> goto err_kfree;
> >>
> >> @@ -1153,6 +1297,9 @@ int ast_mode_init(struct drm_device *dev)
> >> DRM_FORMAT_RGB565,
> >> DRM_FORMAT_C8,
> >> };
> >> + static const uint32_t cursor_plane_formats[] = {
> >> + DRM_FORMAT_ARGB8888,
> >> + };
> >>
> >> struct ast_private *ast = dev->dev_private;
> >> int ret;
> >> @@ -1170,6 +1317,18 @@ int ast_mode_init(struct drm_device *dev)
> >> drm_plane_helper_add(&ast->primary_plane,
> >> &ast_primary_plane_helper_funcs);
> >>
> >> + ret = drm_universal_plane_init(dev, &ast->cursor_plane, 0x01,
> >> + &ast_cursor_plane_funcs,
> >> + cursor_plane_formats,
> >> + ARRAY_SIZE(cursor_plane_formats),
> >> + NULL, DRM_PLANE_TYPE_CURSOR, NULL);
> >> + if (ret) {
> >> + DRM_ERROR("drm_universal_plane_failed(): %d\n", ret);
> >> + return ret;
> >> + }
> >> + drm_plane_helper_add(&ast->cursor_plane,
> >> + &ast_cursor_plane_helper_funcs);
> >> +
> >> ast_cursor_init(dev);
> >> ast_crtc_init(dev);
> >> ast_encoder_init(dev);
> >> --
> >> 2.23.0
> >>
> >
>
> --
> Thomas Zimmermann
> Graphics Driver Developer
> SUSE Software Solutions Germany GmbH
> Maxfeldstr. 5, 90409 Nürnberg, Germany
> (HRB 36809, AG Nürnberg)
> Geschäftsführer: Felix Imendörffer
>
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
More information about the dri-devel
mailing list