[PATCH 9/9] drm/ast: Enable atomic modesetting
Thomas Zimmermann
tzimmermann at suse.de
Wed Nov 6 13:36:21 UTC 2019
Hi
Am 05.11.19 um 10:57 schrieb Gerd Hoffmann:
> On Mon, Oct 28, 2019 at 04:49:28PM +0100, Thomas Zimmermann wrote:
>> This commit sets the remaining atomic-modesetting helpers and the flag
>> DRIVER_ATOMIC. Legacy cursor functions are removed in favor of the cursor
>> plane. For power management, atomic helpers replace the indvidual
>> operations that the driver currently runs.
>>
>> Atomic modesetting is enabled with this commit.
>>
>> Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
>> ---
>> drivers/gpu/drm/ast/ast_drv.c | 24 ++-
>> drivers/gpu/drm/ast/ast_main.c | 5 +
>> drivers/gpu/drm/ast/ast_mode.c | 290 ++-------------------------------
>> 3 files changed, 33 insertions(+), 286 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/ast/ast_drv.c b/drivers/gpu/drm/ast/ast_drv.c
>> index 1f17794b0890..d763da6f0834 100644
>> --- a/drivers/gpu/drm/ast/ast_drv.c
>> +++ b/drivers/gpu/drm/ast/ast_drv.c
>> @@ -99,14 +99,14 @@ ast_pci_remove(struct pci_dev *pdev)
>> drm_put_dev(dev);
>> }
>>
>> -
>> -
>> static int ast_drm_freeze(struct drm_device *dev)
>> {
>> - drm_kms_helper_poll_disable(dev);
>> - pci_save_state(dev->pdev);
>> - drm_fb_helper_set_suspend_unlocked(dev->fb_helper, true);
>> + int error;
>>
>> + error = drm_mode_config_helper_suspend(dev);
>> + if (error)
>> + return error;
>> + pci_save_state(dev->pdev);
>> return 0;
>> }
>>
>> @@ -114,11 +114,7 @@ static int ast_drm_thaw(struct drm_device *dev)
>> {
>> ast_post_gpu(dev);
>>
>> - drm_mode_config_reset(dev);
>> - drm_helper_resume_force_mode(dev);
>> - drm_fb_helper_set_suspend_unlocked(dev->fb_helper, false);
>> -
>> - return 0;
>> + return drm_mode_config_helper_resume(dev);
>> }
>>
>> static int ast_drm_resume(struct drm_device *dev)
>> @@ -131,8 +127,6 @@ static int ast_drm_resume(struct drm_device *dev)
>> ret = ast_drm_thaw(dev);
>> if (ret)
>> return ret;
>> -
>> - drm_kms_helper_poll_enable(dev);
>> return 0;
>> }
>>
>> @@ -150,6 +144,7 @@ static int ast_pm_suspend(struct device *dev)
>> pci_set_power_state(pdev, PCI_D3hot);
>> return 0;
>> }
>> +
>> static int ast_pm_resume(struct device *dev)
>> {
>> struct pci_dev *pdev = to_pci_dev(dev);
>> @@ -165,7 +160,6 @@ static int ast_pm_freeze(struct device *dev)
>> if (!ddev || !ddev->dev_private)
>> return -ENODEV;
>> return ast_drm_freeze(ddev);
>> -
>> }
>>
>> static int ast_pm_thaw(struct device *dev)
>> @@ -203,7 +197,9 @@ static struct pci_driver ast_pci_driver = {
>> DEFINE_DRM_GEM_FOPS(ast_fops);
>>
>> static struct drm_driver driver = {
>> - .driver_features = DRIVER_MODESET | DRIVER_GEM,
>> + .driver_features = DRIVER_ATOMIC |
>> + DRIVER_GEM |
>> + DRIVER_MODESET,
>>
>> .load = ast_driver_load,
>> .unload = ast_driver_unload,
>> diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c
>> index 48d57ab42955..b79f484e9bd2 100644
>> --- a/drivers/gpu/drm/ast/ast_main.c
>> +++ b/drivers/gpu/drm/ast/ast_main.c
>> @@ -28,6 +28,7 @@
>>
>> #include <linux/pci.h>
>>
>> +#include <drm/drm_atomic_helper.h>
>> #include <drm/drm_crtc_helper.h>
>> #include <drm/drm_fb_helper.h>
>> #include <drm/drm_gem.h>
>> @@ -412,6 +413,8 @@ enum drm_mode_status ast_mode_config_mode_valid(struct drm_device *dev,
>> static const struct drm_mode_config_funcs ast_mode_funcs = {
>> .fb_create = drm_gem_fb_create,
>> .mode_valid = ast_mode_config_mode_valid,
>> + .atomic_check = drm_atomic_helper_check,
>> + .atomic_commit = drm_atomic_helper_commit,
>> };
>>
>> static u32 ast_get_vram_info(struct drm_device *dev)
>> @@ -529,6 +532,8 @@ int ast_driver_load(struct drm_device *dev, unsigned long flags)
>> if (ret)
>> goto out_free;
>>
>> + drm_mode_config_reset(dev);
>> +
>> ret = drm_fbdev_generic_setup(dev, 32);
>> if (ret)
>> goto out_free;
>> diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
>> index f5f73200e8e4..5eccb6ae2ede 100644
>> --- a/drivers/gpu/drm/ast/ast_mode.c
>> +++ b/drivers/gpu/drm/ast/ast_mode.c
>> @@ -45,11 +45,6 @@
>>
>> static struct ast_i2c_chan *ast_i2c_create(struct drm_device *dev);
>> static void ast_i2c_destroy(struct ast_i2c_chan *i2c);
>> -static int ast_cursor_set(struct drm_crtc *crtc,
>> - struct drm_file *file_priv,
>> - uint32_t handle,
>> - uint32_t width,
>> - uint32_t height);
>> static int ast_cursor_move(struct drm_crtc *crtc,
>> int x, int y);
>>
>> @@ -58,9 +53,6 @@ static u32 copy_cursor_image(u8 *src, u8 *dst, int width, int height);
>> static int ast_cursor_update(void *dst, void *src, unsigned int width,
>> unsigned int height);
>> static void ast_cursor_set_base(struct ast_private *ast, u64 address);
>> -static int ast_show_cursor(struct drm_crtc *crtc, void *src,
>> - unsigned int width, unsigned int height);
>> -static void ast_hide_cursor(struct drm_crtc *crtc);
>> static int ast_cursor_move(struct drm_crtc *crtc,
>> int x, int y);
>>
>> @@ -434,7 +426,7 @@ static void ast_set_crtc_reg(struct drm_crtc *crtc, struct drm_display_mode *mod
>> static void ast_set_offset_reg(struct drm_crtc *crtc)
>> {
>> struct ast_private *ast = crtc->dev->dev_private;
>> - const struct drm_framebuffer *fb = crtc->primary->fb;
>> + const struct drm_framebuffer *fb = crtc->primary->state->fb;
>>
>> u16 offset;
>>
>> @@ -528,7 +520,7 @@ static void ast_set_sync_reg(struct drm_device *dev, struct drm_display_mode *mo
>> static bool ast_set_dac_reg(struct drm_crtc *crtc, struct drm_display_mode *mode,
>> struct ast_vbios_mode_info *vbios_mode)
>> {
>> - const struct drm_framebuffer *fb = crtc->primary->fb;
>> + const struct drm_framebuffer *fb = crtc->primary->state->fb;
>>
>> switch (fb->format->cpp[0] * 8) {
>> case 8:
>> @@ -765,112 +757,6 @@ static void ast_crtc_dpms(struct drm_crtc *crtc, int mode)
>> }
>> }
>>
>> -static int ast_crtc_do_set_base(struct drm_crtc *crtc,
>> - struct drm_framebuffer *fb,
>> - int x, int y, int atomic)
>> -{
>> - struct drm_gem_vram_object *gbo;
>> - int ret;
>> - s64 gpu_addr;
>> -
>> - if (!atomic && fb) {
>> - gbo = drm_gem_vram_of_gem(fb->obj[0]);
>> - drm_gem_vram_unpin(gbo);
>> - }
>> -
>> - gbo = drm_gem_vram_of_gem(crtc->primary->fb->obj[0]);
>> -
>> - ret = drm_gem_vram_pin(gbo, DRM_GEM_VRAM_PL_FLAG_VRAM);
>> - if (ret)
>> - return ret;
>> - gpu_addr = drm_gem_vram_offset(gbo);
>> - if (gpu_addr < 0) {
>> - ret = (int)gpu_addr;
>> - goto err_drm_gem_vram_unpin;
>> - }
>> -
>> - ast_set_offset_reg(crtc);
>> - ast_set_start_address_crt1(crtc, (u32)gpu_addr);
>> -
>> - return 0;
>> -
>> -err_drm_gem_vram_unpin:
>> - drm_gem_vram_unpin(gbo);
>> - return ret;
>> -}
>> -
>> -static int ast_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
>> - struct drm_framebuffer *old_fb)
>> -{
>> - return ast_crtc_do_set_base(crtc, old_fb, x, y, 0);
>> -}
>> -
>> -static int ast_crtc_mode_set(struct drm_crtc *crtc,
>> - struct drm_display_mode *mode,
>> - struct drm_display_mode *adjusted_mode,
>> - int x, int y,
>> - struct drm_framebuffer *old_fb)
>> -{
>> - struct drm_device *dev = crtc->dev;
>> - struct ast_private *ast = crtc->dev->dev_private;
>> - const struct drm_framebuffer *fb = crtc->primary->fb;
>> - struct ast_vbios_mode_info vbios_mode;
>> - bool succ;
>> -
>> - if (ast->chip == AST1180) {
>> - DRM_ERROR("AST 1180 modesetting not supported\n");
>> - return -EINVAL;
>> - }
>> -
>> - succ = ast_get_vbios_mode_info(fb, mode, adjusted_mode, &vbios_mode);
>> - if (!succ)
>> - return -EINVAL;
>> -
>> - ast_open_key(ast);
>> -
>> - ast_set_vbios_color_reg(crtc, fb, &vbios_mode);
>> - ast_set_vbios_mode_reg(crtc, adjusted_mode, &vbios_mode);
>> - ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa1, 0x06);
>> - ast_set_std_reg(crtc, adjusted_mode, &vbios_mode);
>> - ast_set_crtc_reg(crtc, adjusted_mode, &vbios_mode);
>> - ast_set_offset_reg(crtc);
>> - ast_set_dclk_reg(dev, adjusted_mode, &vbios_mode);
>> - ast_set_color_reg(crtc, fb);
>> - ast_set_crtthd_reg(crtc);
>> - ast_set_sync_reg(dev, adjusted_mode, &vbios_mode);
>> - ast_set_dac_reg(crtc, adjusted_mode, &vbios_mode);
>> -
>> - ast_crtc_mode_set_base(crtc, x, y, old_fb);
>> -
>> - return 0;
>> -}
>> -
>> -static void ast_crtc_disable(struct drm_crtc *crtc)
>> -{
>> - DRM_DEBUG_KMS("\n");
>> - ast_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
>> - if (crtc->primary->fb) {
>> - struct drm_framebuffer *fb = crtc->primary->fb;
>> - struct drm_gem_vram_object *gbo =
>> - drm_gem_vram_of_gem(fb->obj[0]);
>> -
>> - drm_gem_vram_unpin(gbo);
>> - }
>> - crtc->primary->fb = NULL;
>> -}
>> -
>> -static void ast_crtc_prepare(struct drm_crtc *crtc)
>> -{
>> -
>> -}
>> -
>> -static void ast_crtc_commit(struct drm_crtc *crtc)
>> -{
>> - struct ast_private *ast = crtc->dev->dev_private;
>> - ast_set_index_reg_mask(ast, AST_IO_SEQ_PORT, 0x1, 0xdf, 0);
>> - ast_crtc_load_lut(crtc);
>> -}
>> -
>> static int ast_crtc_helper_atomic_check(struct drm_crtc *crtc,
>> struct drm_crtc_state *state)
>> {
>> @@ -970,12 +856,6 @@ ast_crtc_helper_atomic_disable(struct drm_crtc *crtc,
>> }
>>
>> static const struct drm_crtc_helper_funcs ast_crtc_helper_funcs = {
>> - .dpms = ast_crtc_dpms,
>> - .mode_set = ast_crtc_mode_set,
>> - .mode_set_base = ast_crtc_mode_set_base,
>> - .disable = ast_crtc_disable,
>> - .prepare = ast_crtc_prepare,
>> - .commit = ast_crtc_commit,
>> .atomic_check = ast_crtc_helper_atomic_check,
>> .atomic_begin = ast_crtc_helper_atomic_begin,
>> .atomic_flush = ast_crtc_helper_atomic_flush,
>> @@ -983,21 +863,6 @@ static const struct drm_crtc_helper_funcs ast_crtc_helper_funcs = {
>> .atomic_disable = ast_crtc_helper_atomic_disable,
>> };
>>
>> -static void ast_crtc_reset(struct drm_crtc *crtc)
>> -{
>> -
>> -}
>> -
>> -static int ast_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
>> - u16 *blue, uint32_t size,
>> - struct drm_modeset_acquire_ctx *ctx)
>> -{
>> - ast_crtc_load_lut(crtc);
>> -
>> - return 0;
>> -}
>> -
>> -
>> static void ast_crtc_destroy(struct drm_crtc *crtc)
>> {
>> drm_crtc_cleanup(crtc);
>> @@ -1005,12 +870,12 @@ static void ast_crtc_destroy(struct drm_crtc *crtc)
>> }
>>
>> static const struct drm_crtc_funcs ast_crtc_funcs = {
>> - .cursor_set = ast_cursor_set,
>> - .cursor_move = ast_cursor_move,
>> - .reset = ast_crtc_reset,
>> + .reset = drm_atomic_helper_crtc_reset,
>> .set_config = drm_crtc_helper_set_config,
>> - .gamma_set = ast_crtc_gamma_set,
>> + .gamma_set = drm_atomic_helper_legacy_gamma_set,
>> .destroy = ast_crtc_destroy,
>> + .set_config = drm_atomic_helper_set_config,
>> + .page_flip = drm_atomic_helper_page_flip,
>> .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
>> .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
>> };
>> @@ -1040,6 +905,10 @@ static int ast_crtc_init(struct drm_device *dev)
>> return ret;
>> }
>>
>> +/*
>> + * Encoder
>> + */
>> +
>> static void ast_encoder_destroy(struct drm_encoder *encoder)
>> {
>> drm_encoder_cleanup(encoder);
>> @@ -1050,34 +919,6 @@ static const struct drm_encoder_funcs ast_enc_funcs = {
>> .destroy = ast_encoder_destroy,
>> };
>>
>> -static void ast_encoder_dpms(struct drm_encoder *encoder, int mode)
>> -{
>> -
>> -}
>> -
>> -static void ast_encoder_mode_set(struct drm_encoder *encoder,
>> - struct drm_display_mode *mode,
>> - struct drm_display_mode *adjusted_mode)
>> -{
>> -}
>> -
>> -static void ast_encoder_prepare(struct drm_encoder *encoder)
>> -{
>> -
>> -}
>> -
>> -static void ast_encoder_commit(struct drm_encoder *encoder)
>> -{
>> -
>> -}
>> -
>> -static const struct drm_encoder_helper_funcs ast_enc_helper_funcs = {
>> - .dpms = ast_encoder_dpms,
>> - .prepare = ast_encoder_prepare,
>> - .commit = ast_encoder_commit,
>> - .mode_set = ast_encoder_mode_set,
>> -};
>
> Hmm. Pretty much a dummy encoder implementation. Maybe ast is simple
> enough that the simple pipe helpers can do the trick?
As Daniel said, simple pipe helpers don't support cursors. I
investigated his comment on a encoder helpers and found that many
drivers (including ast) only create an encoder structure without
additional functionality.
It's probably worth introducing a default implementation for the
encoder, but I'd like to do that in a separate patch set. Ok?
Best regards
Thomas
>
> cheers,
> Gerd
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20191106/d8a077f3/attachment.sig>
More information about the dri-devel
mailing list