[Freedreno] drm/msm: 'pp done time out' errors after async commit changes

Jeffrey Hugo jeffrey.l.hugo at gmail.com
Wed Nov 6 16:47:11 UTC 2019


On Wed, Nov 6, 2019 at 9:30 AM Rob Clark <robdclark at gmail.com> wrote:
>
> On Wed, Nov 6, 2019 at 1:13 AM Brian Masney <masneyb at onstation.org> wrote:
> >
> > On Tue, Nov 05, 2019 at 08:23:27AM -0800, Rob Clark wrote:
> > > On Tue, Nov 5, 2019 at 2:08 AM Brian Masney <masneyb at onstation.org> wrote:
> > > > The 'pp done time out' errors go away if I revert the following three
> > > > commits:
> > > >
> > > > cd6d923167b1 ("drm/msm/dpu: async commit support")
> > > > d934a712c5e6 ("drm/msm: add atomic traces")
> > > > 2d99ced787e3 ("drm/msm: async commit support")
> > > >
> > > > I reverted the first one to fix a compiler error, and the second one so
> > > > that the last patch can be reverted without any merge conflicts.
> > > >
> > > > I see that crtc_flush() calls mdp5_ctl_commit(). I tried to use
> > > > crtc_flush_all() in mdp5_flush_commit() and the contents of the frame
> > > > buffer dance around the screen like its out of sync. I renamed
> > > > crtc_flush_all() to mdp5_crtc_flush_all() and removed the static
> > > > declaration. Here's the relevant part of what I tried:
> > > >
> > > > --- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
> > > > +++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
> > > > @@ -171,7 +171,15 @@ static void mdp5_prepare_commit(struct msm_kms *kms, struct drm_atomic_state *st
> > > >
> > > >  static void mdp5_flush_commit(struct msm_kms *kms, unsigned crtc_mask)
> > > >  {
> > > > -       /* TODO */
> > > > +       struct mdp5_kms *mdp5_kms = to_mdp5_kms(to_mdp_kms(kms));
> > > > +       struct drm_crtc *crtc;
> > > > +
> > > > +       for_each_crtc_mask(mdp5_kms->dev, crtc, crtc_mask) {
> > > > +               if (!crtc->state->active)
> > > > +                       continue;
> > > > +
> > > > +               mdp5_crtc_flush_all(crtc);
> > > > +       }
> > > >  }
> > > >
> > > > Any tips would be appreciated.
> > >
> > >
> > > I think this is along the lines of what we need to enable async commit
> > > for mdp5 (but also removing the flush from the atomic-commit path)..
> > > the principle behind the async commit is to do all the atomic state
> > > commit normally, but defer writing the flush bits.  This way, if you
> > > get another async update before the next vblank, you just apply it
> > > immediately instead of waiting for vblank.
> > >
> > > But I guess you are on a command mode panel, if I remember?  Which is
> > > a case I didn't have a way to test.  And I'm not entirely about how
> > > kms_funcs->vsync_time() should be implemented for cmd mode panels.
> >
> > Yes, this is a command-mode panel and there's no hardware frame counter
> > available. The key to getting the display working on this phone was this
> > patch:
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2bab52af6fe68c43b327a57e5ce5fc10eefdfadf
> >
> > > That all said, I think we should first fix what is broken, before
> > > worrying about extending async commit support to mdp5.. which
> > > shouldn't hit the async==true path, due to not implementing
> > > kms_funcs->vsync_time().
> > >
> > > What I think is going on is that, in the cmd mode case,
> > > mdp5_wait_flush() (indirectly) calls mdp5_crtc_wait_for_pp_done(),
> > > which waits for a pp-done irq regardless of whether there is a flush
> > > in progress.  Since there is no flush pending, the irq never comes.
> > > But the expectation is that kms_funcs->wait_flush() returns
> > > immediately if there is nothing to wait for.
> >
> > I don't think that's happening in this case. I added some pr_info()
> > statements to request_pp_done_pending() and mdp5_crtc_pp_done_irq().
> > Here's the first two sets of messages that appear in dmesg:
> >
> > [   14.018907] msm fd900000.mdss: pp done time out, lm=0
> > [   14.018993] request_pp_done_pending: HERE
> > [   14.074208] mdp5_crtc_pp_done_irq: HERE
> > [   14.074368] Console: switching to colour frame buffer device 135x120
> > [   14.138938] msm fd900000.mdss: pp done time out, lm=0
> > [   14.139021] request_pp_done_pending: HERE
> > [   14.158097] mdp5_crtc_pp_done_irq: HERE
> >
> > The messages go on like this with the same pattern.
> >
> > I tried two different changes:
> >
> > 1) I moved the request_pp_done_pending() and corresponding if statement
> >    from mdp5_crtc_atomic_flush() and into mdp5_crtc_atomic_begin().
> >
> > 2) I increased the timeout in wait_for_completion_timeout() by several
> >    increments; all the way to 5 seconds.
>
> increasing the timeout won't help, because the pp-done irq has already
> come at the point where we wait for it..
>
> maybe the easy thing is just add mdp5_crtc->needs_pp, set to true
> before requesting, and false when we get the irq.. and then
> mdp5_crtc_wait_for_pp_done() just returns if needs_pp==false..

On the otherhand, what about trying to make command mode panels
resemble video mode panels slightly?  Video mode panels have a vsync
counter in hardware, which is missing from command mode - however it
seems like the driver/drm framework would prefer such a counter.
Would it be a reasonable idea to make a software counter, and just
increment it every time the pp_done irq is triggered?

I'm just thinking that we'll avoid issues long term by trying to make
the code common, rather than diverging it for the two modes.

>
> BR,
> -R
>
> > I haven't dug into the new code anymore.
> >
> > Brian
> _______________________________________________
> Freedreno mailing list
> Freedreno at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/freedreno


More information about the dri-devel mailing list