[PATCH 2/2] drm/gma500: Add page flip support on psb/cdv
Patrik Jakobsson
patrik.r.jakobsson at gmail.com
Thu Nov 7 09:48:27 UTC 2019
On Thu, Nov 7, 2019 at 10:21 AM Daniel Vetter <daniel at ffwll.ch> wrote:
>
> On Thu, Nov 7, 2019 at 10:08 AM Patrik Jakobsson
> <patrik.r.jakobsson at gmail.com> wrote:
> >
> > On Thu, Nov 7, 2019 at 9:31 AM Daniel Vetter <daniel at ffwll.ch> wrote:
> > >
> > > On Wed, Nov 06, 2019 at 04:24:59PM +0100, Patrik Jakobsson wrote:
> > > > On Wed, Nov 6, 2019 at 10:44 AM Paul Kocialkowski
> > > > <paul.kocialkowski at bootlin.com> wrote:
> > > > >
> > > > > Legacy (non-atomic) page flip support is added to the driver by using the
> > > > > mode_set_base CRTC function, that allows configuring a new framebuffer for
> > > > > display. Since the function requires the primary plane's fb to be set
> > > > > already, this is done prior to calling the function in the page flip helper
> > > > > and reverted if the flip fails.
> > > > >
> > > > > The vblank interrupt handler is also refactored to support passing an event.
> > > > > The PIPE_TE_STATUS bit is also considered to indicate vblank on medfield
> > > > > only, as explained in psb_enable_vblank.
> > > > >
> > > > > It was tested by running weston on both poulsbo and cedartrail.
> > > > >
> > > > > Signed-off-by: Paul Kocialkowski <paul.kocialkowski at bootlin.com>
> > > > > ---
> > > > > drivers/gpu/drm/gma500/cdv_intel_display.c | 1 +
> > > > > drivers/gpu/drm/gma500/gma_display.c | 46 ++++++++++++++++++++++
> > > > > drivers/gpu/drm/gma500/gma_display.h | 6 +++
> > > > > drivers/gpu/drm/gma500/psb_intel_display.c | 1 +
> > > > > drivers/gpu/drm/gma500/psb_intel_drv.h | 3 ++
> > > > > drivers/gpu/drm/gma500/psb_irq.c | 18 +++++++--
> > > > > 6 files changed, 72 insertions(+), 3 deletions(-)
> > > > >
> > > > > diff --git a/drivers/gpu/drm/gma500/cdv_intel_display.c b/drivers/gpu/drm/gma500/cdv_intel_display.c
> > > > > index 8b784947ed3b..7109d3d19be0 100644
> > > > > --- a/drivers/gpu/drm/gma500/cdv_intel_display.c
> > > > > +++ b/drivers/gpu/drm/gma500/cdv_intel_display.c
> > > > > @@ -979,6 +979,7 @@ const struct drm_crtc_funcs cdv_intel_crtc_funcs = {
> > > > > .gamma_set = gma_crtc_gamma_set,
> > > > > .set_config = gma_crtc_set_config,
> > > > > .destroy = gma_crtc_destroy,
> > > > > + .page_flip = gma_crtc_page_flip,
> > > > > };
> > > > >
> > > > > const struct gma_clock_funcs cdv_clock_funcs = {
> > > > > diff --git a/drivers/gpu/drm/gma500/gma_display.c b/drivers/gpu/drm/gma500/gma_display.c
> > > > > index bc07ae2a9a1d..17f136985d21 100644
> > > > > --- a/drivers/gpu/drm/gma500/gma_display.c
> > > > > +++ b/drivers/gpu/drm/gma500/gma_display.c
> > > > > @@ -503,6 +503,52 @@ void gma_crtc_destroy(struct drm_crtc *crtc)
> > > > > kfree(gma_crtc);
> > > > > }
> > > > >
> > > > > +int gma_crtc_page_flip(struct drm_crtc *crtc,
> > > > > + struct drm_framebuffer *fb,
> > > > > + struct drm_pending_vblank_event *event,
> > > > > + uint32_t page_flip_flags,
> > > > > + struct drm_modeset_acquire_ctx *ctx)
> > > > > +{
> > > > > + struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
> > > > > + struct drm_framebuffer *current_fb = crtc->primary->fb;
> > > > > + struct drm_framebuffer *old_fb = crtc->primary->old_fb;
> > > > > + const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
> > > > > + struct drm_device *dev = crtc->dev;
> > > > > + unsigned long flags;
> > > > > + int ret;
> > > > > +
> > > > > + if (!crtc_funcs->mode_set_base)
> > > > > + return -EINVAL;
> > > > > +
> > > > > + /* Using mode_set_base requires the new fb to be set already. */
> > > > > + crtc->primary->fb = fb;
> > > > > +
> > > > > + if (event) {
> > > > > + spin_lock_irqsave(&dev->event_lock, flags);
> > > > > +
> > > > > + WARN_ON(drm_crtc_vblank_get(crtc) != 0);
> > > > > +
> > > > > + gma_crtc->page_flip_event = event;
> > > > > +
> > > > > + /* Call this locked if we want an event at vblank interrupt. */
> > > > > + ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb);
> > > > > + if (ret) {
> > > > > + gma_crtc->page_flip_event = NULL;
> > > > > + drm_crtc_vblank_put(crtc);
> > > > > + }
> > > > > +
> > > > > + spin_unlock_irqrestore(&dev->event_lock, flags);
> > > > > + } else {
> > > > > + ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb);
> > > > > + }
> > > > > +
> > > > > + /* Restore previous fb in case of failure. */
> > > > > + if (ret)
> > > > > + crtc->primary->fb = current_fb;
> > > > > +
> > > > > + return ret;
> > > > > +}
> > > > > +
> > > > > int gma_crtc_set_config(struct drm_mode_set *set,
> > > > > struct drm_modeset_acquire_ctx *ctx)
> > > > > {
> > > > > diff --git a/drivers/gpu/drm/gma500/gma_display.h b/drivers/gpu/drm/gma500/gma_display.h
> > > > > index fdbd7ecaa59c..7bd6c1ee8b21 100644
> > > > > --- a/drivers/gpu/drm/gma500/gma_display.h
> > > > > +++ b/drivers/gpu/drm/gma500/gma_display.h
> > > > > @@ -11,6 +11,7 @@
> > > > > #define _GMA_DISPLAY_H_
> > > > >
> > > > > #include <linux/pm_runtime.h>
> > > > > +#include <drm/drm_vblank.h>
> > > > >
> > > > > struct drm_encoder;
> > > > > struct drm_mode_set;
> > > > > @@ -71,6 +72,11 @@ extern void gma_crtc_prepare(struct drm_crtc *crtc);
> > > > > extern void gma_crtc_commit(struct drm_crtc *crtc);
> > > > > extern void gma_crtc_disable(struct drm_crtc *crtc);
> > > > > extern void gma_crtc_destroy(struct drm_crtc *crtc);
> > > > > +extern int gma_crtc_page_flip(struct drm_crtc *crtc,
> > > > > + struct drm_framebuffer *fb,
> > > > > + struct drm_pending_vblank_event *event,
> > > > > + uint32_t page_flip_flags,
> > > > > + struct drm_modeset_acquire_ctx *ctx);
> > > > > extern int gma_crtc_set_config(struct drm_mode_set *set,
> > > > > struct drm_modeset_acquire_ctx *ctx);
> > > > >
> > > > > diff --git a/drivers/gpu/drm/gma500/psb_intel_display.c b/drivers/gpu/drm/gma500/psb_intel_display.c
> > > > > index 4256410535f0..fed3b563e62e 100644
> > > > > --- a/drivers/gpu/drm/gma500/psb_intel_display.c
> > > > > +++ b/drivers/gpu/drm/gma500/psb_intel_display.c
> > > > > @@ -432,6 +432,7 @@ const struct drm_crtc_funcs psb_intel_crtc_funcs = {
> > > > > .gamma_set = gma_crtc_gamma_set,
> > > > > .set_config = gma_crtc_set_config,
> > > > > .destroy = gma_crtc_destroy,
> > > > > + .page_flip = gma_crtc_page_flip,
> > > > > };
> > > > >
> > > > > const struct gma_clock_funcs psb_clock_funcs = {
> > > > > diff --git a/drivers/gpu/drm/gma500/psb_intel_drv.h b/drivers/gpu/drm/gma500/psb_intel_drv.h
> > > > > index cdf10333d1c2..16c6136f778b 100644
> > > > > --- a/drivers/gpu/drm/gma500/psb_intel_drv.h
> > > > > +++ b/drivers/gpu/drm/gma500/psb_intel_drv.h
> > > > > @@ -12,6 +12,7 @@
> > > > > #include <drm/drm_crtc_helper.h>
> > > > > #include <drm/drm_encoder.h>
> > > > > #include <drm/drm_probe_helper.h>
> > > > > +#include <drm/drm_vblank.h>
> > > > > #include <linux/gpio.h>
> > > > > #include "gma_display.h"
> > > > >
> > > > > @@ -182,6 +183,8 @@ struct gma_crtc {
> > > > > struct psb_intel_crtc_state *crtc_state;
> > > > >
> > > > > const struct gma_clock_funcs *clock_funcs;
> > > > > +
> > > > > + struct drm_pending_vblank_event *page_flip_event;
> > > > > };
> > > > >
> > > > > #define to_gma_crtc(x) \
> > > > > diff --git a/drivers/gpu/drm/gma500/psb_irq.c b/drivers/gpu/drm/gma500/psb_irq.c
> > > > > index e6265fb85626..f787a51f6335 100644
> > > > > --- a/drivers/gpu/drm/gma500/psb_irq.c
> > > > > +++ b/drivers/gpu/drm/gma500/psb_irq.c
> > > > > @@ -165,11 +165,23 @@ static void mid_pipe_event_handler(struct drm_device *dev, int pipe)
> > > > > "%s, can't clear status bits for pipe %d, its value = 0x%x.\n",
> > > > > __func__, pipe, PSB_RVDC32(pipe_stat_reg));
> > > > >
> > > > > - if (pipe_stat_val & PIPE_VBLANK_STATUS)
> > > > > - drm_handle_vblank(dev, pipe);
> > > > > + if (pipe_stat_val & PIPE_VBLANK_STATUS ||
> > > > > + (IS_MFLD(dev) && pipe_stat_val & PIPE_TE_STATUS)) {
> > > > > + struct drm_crtc *crtc = drm_crtc_from_index(dev, pipe);
> > > > > + struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
> > > > > + unsigned long flags;
> > > > >
> > > > > - if (pipe_stat_val & PIPE_TE_STATUS)
> > > > > drm_handle_vblank(dev, pipe);
> > > > > +
> > > > > + spin_lock_irqsave(&dev->event_lock, flags);
> > > > > + if (gma_crtc->page_flip_event) {
> > > > > + drm_crtc_send_vblank_event(crtc,
> > > > > + gma_crtc->page_flip_event);
> > > > > + gma_crtc->page_flip_event = NULL;
> > > > > + drm_crtc_vblank_put(crtc);
> > > > > + }
> > > > > + spin_unlock_irqrestore(&dev->event_lock, flags);
> > > > > + }
> > > > > }
> > > > >
> > > > > /*
> > > > > --
> > > > > 2.23.0
> > > > >
> > > >
> > > > Looks good!
> > > >
> > > > Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson at gmail.com>
> > >
> > > I'm assuming you'll also push these?
> > >
> > > Always confusing when maintainer/committers r-b but don't say anything
> > > about pushing the patch. Good chances it'll fall through cracks if that
> > > happens.
> > > -Daniel
> >
> > Ah sorry, I also find it confusing. I'll push these.
>
> Thanks.
>
> Also for a quick check whether someone is committer or not:
> https://people.freedesktop.org/~seanpaul/whomisc.html
Great, I've been looking for a list like that.
>
> Once we're on gitlab it should be a lot easier since the list of
> committers is all there in the web ui.
> -Daniel
>
> >
> > -Patrik
> >
> > > --
> > > Daniel Vetter
> > > Software Engineer, Intel Corporation
> > > http://blog.ffwll.ch
>
>
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
More information about the dri-devel
mailing list