[PATCH v3 5/7] drm/panel: panel-simple: Add connector type for etm0700g0dh6

[Laurent Pinchart]

Hi Fabrizio,

Thank you for the patch.

On Thu, Nov 07, 2019 at 08:11:01PM +0000, Fabrizio Castro wrote:
> Add connector type for the etm0700g0dh6 from Emerging Display
> Technologies (EDT).
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro at bp.renesas.com>
> 
> ---
> v2->v3:
> * New patch
> ---
>  drivers/gpu/drm/panel/panel-simple.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 5d48768..82065ff 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -1342,6 +1342,7 @@ static const struct panel_desc edt_etm0700g0dh6 = {
>  	},
>  	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
>  	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
> +	.connector_type = DRM_MODE_CONNECTOR_PARALLEL,

I still think we should have a DRM_MODE_CONNECTOR_PANEL, but regardless,
this panel seems to match DRM_MODE_CONNECTOR_DPI.

>  };
>  
>  static const struct panel_desc edt_etm0700g0bdh6 = {

-- 
Regards,

Laurent Pinchart