[PATCH v3 2/7] drm/bridge: Repurpose lvds-encoder.c
Fabrizio Castro
fabrizio.castro at bp.renesas.com
Thu Nov 7 20:10:58 UTC 2019
lvds-encoder.c implementation is also suitable for LVDS decoders,
not just LVDS encoders.
Instead of creating a new driver for addressing support for
transparent LVDS decoders, repurpose lvds-encoder.c for the greater
good.
Signed-off-by: Fabrizio Castro <fabrizio.castro at bp.renesas.com>
---
v2->v3:
* No change
v1->v2:
* No change
---
drivers/gpu/drm/bridge/Kconfig | 8 +-
drivers/gpu/drm/bridge/Makefile | 2 +-
drivers/gpu/drm/bridge/lvds-codec.c | 131 ++++++++++++++++++++++++++++
drivers/gpu/drm/bridge/lvds-encoder.c | 155 ----------------------------------
4 files changed, 136 insertions(+), 160 deletions(-)
create mode 100644 drivers/gpu/drm/bridge/lvds-codec.c
delete mode 100644 drivers/gpu/drm/bridge/lvds-encoder.c
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 3436297..9e75ca4e 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -45,14 +45,14 @@ config DRM_DUMB_VGA_DAC
Support for non-programmable RGB to VGA DAC bridges, such as ADI
ADV7123, TI THS8134 and THS8135 or passive resistor ladder DACs.
-config DRM_LVDS_ENCODER
- tristate "Transparent parallel to LVDS encoder support"
+config DRM_LVDS_CODEC
+ tristate "Transparent LVDS encoders and decoders support"
depends on OF
select DRM_KMS_HELPER
select DRM_PANEL_BRIDGE
help
- Support for transparent parallel to LVDS encoders that don't require
- any configuration.
+ Support for transparent LVDS encoders and LVDS decoders that don't
+ require any configuration.
config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW
tristate "MegaChips stdp4028-ge-b850v3-fw and stdp2690-ge-b850v3-fw"
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 4934fcf..8a9178a 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -2,7 +2,7 @@
obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o
obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o
obj-$(CONFIG_DRM_DUMB_VGA_DAC) += dumb-vga-dac.o
-obj-$(CONFIG_DRM_LVDS_ENCODER) += lvds-encoder.o
+obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o
obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o
obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
diff --git a/drivers/gpu/drm/bridge/lvds-codec.c b/drivers/gpu/drm/bridge/lvds-codec.c
new file mode 100644
index 0000000..d57a8eb
--- /dev/null
+++ b/drivers/gpu/drm/bridge/lvds-codec.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2019 Renesas Electronics Corporation
+ * Copyright (C) 2016 Laurent Pinchart <laurent.pinchart at ideasonboard.com>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+
+#include <drm/drm_bridge.h>
+#include <drm/drm_panel.h>
+
+struct lvds_codec {
+ struct drm_bridge bridge;
+ struct drm_bridge *panel_bridge;
+ struct gpio_desc *powerdown_gpio;
+};
+
+static int lvds_codec_attach(struct drm_bridge *bridge)
+{
+ struct lvds_codec *lvds_codec = container_of(bridge,
+ struct lvds_codec, bridge);
+
+ return drm_bridge_attach(bridge->encoder, lvds_codec->panel_bridge,
+ bridge);
+}
+
+static void lvds_codec_enable(struct drm_bridge *bridge)
+{
+ struct lvds_codec *lvds_codec = container_of(bridge,
+ struct lvds_codec, bridge);
+
+ if (lvds_codec->powerdown_gpio)
+ gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 0);
+}
+
+static void lvds_codec_disable(struct drm_bridge *bridge)
+{
+ struct lvds_codec *lvds_codec = container_of(bridge,
+ struct lvds_codec, bridge);
+
+ if (lvds_codec->powerdown_gpio)
+ gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 1);
+}
+
+static struct drm_bridge_funcs funcs = {
+ .attach = lvds_codec_attach,
+ .enable = lvds_codec_enable,
+ .disable = lvds_codec_disable,
+};
+
+static int lvds_codec_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *panel_node;
+ struct drm_panel *panel;
+ struct lvds_codec *lvds_codec;
+
+ lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL);
+ if (!lvds_codec)
+ return -ENOMEM;
+
+ lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(lvds_codec->powerdown_gpio))
+ return PTR_ERR(lvds_codec->powerdown_gpio);
+
+ panel_node = of_graph_get_remote_node(dev->of_node, 1, 0);
+ if (!panel_node) {
+ dev_dbg(dev, "panel DT node not found\n");
+ return -ENXIO;
+ }
+
+ panel = of_drm_find_panel(panel_node);
+ of_node_put(panel_node);
+ if (IS_ERR(panel)) {
+ dev_dbg(dev, "panel not found, deferring probe\n");
+ return PTR_ERR(panel);
+ }
+
+ lvds_codec->panel_bridge = devm_drm_panel_bridge_add(dev, panel);
+ if (IS_ERR(lvds_codec->panel_bridge))
+ return PTR_ERR(lvds_codec->panel_bridge);
+
+ /* The panel_bridge bridge is attached to the panel's of_node,
+ * but we need a bridge attached to our of_node for our user
+ * to look up.
+ */
+ lvds_codec->bridge.of_node = dev->of_node;
+ lvds_codec->bridge.funcs = &funcs;
+ drm_bridge_add(&lvds_codec->bridge);
+
+ platform_set_drvdata(pdev, lvds_codec);
+
+ return 0;
+}
+
+static int lvds_codec_remove(struct platform_device *pdev)
+{
+ struct lvds_codec *lvds_codec = platform_get_drvdata(pdev);
+
+ drm_bridge_remove(&lvds_codec->bridge);
+
+ return 0;
+}
+
+static const struct of_device_id lvds_codec_match[] = {
+ { .compatible = "lvds-encoder" },
+ { .compatible = "thine,thc63lvdm83d" },
+ { .compatible = "lvds-decoder" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, lvds_codec_match);
+
+static struct platform_driver lvds_codec_driver = {
+ .probe = lvds_codec_probe,
+ .remove = lvds_codec_remove,
+ .driver = {
+ .name = "lvds-codec",
+ .of_match_table = lvds_codec_match,
+ },
+};
+module_platform_driver(lvds_codec_driver);
+
+MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart at ideasonboard.com>");
+MODULE_DESCRIPTION("Driver for transparent LVDS encoders and LVDS decoders");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/bridge/lvds-encoder.c b/drivers/gpu/drm/bridge/lvds-encoder.c
deleted file mode 100644
index e2132a8..0000000
--- a/drivers/gpu/drm/bridge/lvds-encoder.c
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2016 Laurent Pinchart <laurent.pinchart at ideasonboard.com>
- */
-
-#include <linux/gpio/consumer.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_graph.h>
-#include <linux/platform_device.h>
-
-#include <drm/drm_bridge.h>
-#include <drm/drm_panel.h>
-
-struct lvds_encoder {
- struct drm_bridge bridge;
- struct drm_bridge *panel_bridge;
- struct gpio_desc *powerdown_gpio;
-};
-
-static int lvds_encoder_attach(struct drm_bridge *bridge)
-{
- struct lvds_encoder *lvds_encoder = container_of(bridge,
- struct lvds_encoder,
- bridge);
-
- return drm_bridge_attach(bridge->encoder, lvds_encoder->panel_bridge,
- bridge);
-}
-
-static void lvds_encoder_enable(struct drm_bridge *bridge)
-{
- struct lvds_encoder *lvds_encoder = container_of(bridge,
- struct lvds_encoder,
- bridge);
-
- if (lvds_encoder->powerdown_gpio)
- gpiod_set_value_cansleep(lvds_encoder->powerdown_gpio, 0);
-}
-
-static void lvds_encoder_disable(struct drm_bridge *bridge)
-{
- struct lvds_encoder *lvds_encoder = container_of(bridge,
- struct lvds_encoder,
- bridge);
-
- if (lvds_encoder->powerdown_gpio)
- gpiod_set_value_cansleep(lvds_encoder->powerdown_gpio, 1);
-}
-
-static struct drm_bridge_funcs funcs = {
- .attach = lvds_encoder_attach,
- .enable = lvds_encoder_enable,
- .disable = lvds_encoder_disable,
-};
-
-static int lvds_encoder_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct device_node *port;
- struct device_node *endpoint;
- struct device_node *panel_node;
- struct drm_panel *panel;
- struct lvds_encoder *lvds_encoder;
-
- lvds_encoder = devm_kzalloc(dev, sizeof(*lvds_encoder), GFP_KERNEL);
- if (!lvds_encoder)
- return -ENOMEM;
-
- lvds_encoder->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown",
- GPIOD_OUT_HIGH);
- if (IS_ERR(lvds_encoder->powerdown_gpio)) {
- int err = PTR_ERR(lvds_encoder->powerdown_gpio);
-
- if (err != -EPROBE_DEFER)
- dev_err(dev, "powerdown GPIO failure: %d\n", err);
- return err;
- }
-
- /* Locate the panel DT node. */
- port = of_graph_get_port_by_id(dev->of_node, 1);
- if (!port) {
- dev_dbg(dev, "port 1 not found\n");
- return -ENXIO;
- }
-
- endpoint = of_get_child_by_name(port, "endpoint");
- of_node_put(port);
- if (!endpoint) {
- dev_dbg(dev, "no endpoint for port 1\n");
- return -ENXIO;
- }
-
- panel_node = of_graph_get_remote_port_parent(endpoint);
- of_node_put(endpoint);
- if (!panel_node) {
- dev_dbg(dev, "no remote endpoint for port 1\n");
- return -ENXIO;
- }
-
- panel = of_drm_find_panel(panel_node);
- of_node_put(panel_node);
- if (IS_ERR(panel)) {
- dev_dbg(dev, "panel not found, deferring probe\n");
- return PTR_ERR(panel);
- }
-
- lvds_encoder->panel_bridge =
- devm_drm_panel_bridge_add_typed(dev, panel,
- DRM_MODE_CONNECTOR_LVDS);
- if (IS_ERR(lvds_encoder->panel_bridge))
- return PTR_ERR(lvds_encoder->panel_bridge);
-
- /* The panel_bridge bridge is attached to the panel's of_node,
- * but we need a bridge attached to our of_node for our user
- * to look up.
- */
- lvds_encoder->bridge.of_node = dev->of_node;
- lvds_encoder->bridge.funcs = &funcs;
- drm_bridge_add(&lvds_encoder->bridge);
-
- platform_set_drvdata(pdev, lvds_encoder);
-
- return 0;
-}
-
-static int lvds_encoder_remove(struct platform_device *pdev)
-{
- struct lvds_encoder *lvds_encoder = platform_get_drvdata(pdev);
-
- drm_bridge_remove(&lvds_encoder->bridge);
-
- return 0;
-}
-
-static const struct of_device_id lvds_encoder_match[] = {
- { .compatible = "lvds-encoder" },
- { .compatible = "thine,thc63lvdm83d" },
- {},
-};
-MODULE_DEVICE_TABLE(of, lvds_encoder_match);
-
-static struct platform_driver lvds_encoder_driver = {
- .probe = lvds_encoder_probe,
- .remove = lvds_encoder_remove,
- .driver = {
- .name = "lvds-encoder",
- .of_match_table = lvds_encoder_match,
- },
-};
-module_platform_driver(lvds_encoder_driver);
-
-MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart at ideasonboard.com>");
-MODULE_DESCRIPTION("Transparent parallel to LVDS encoder");
-MODULE_LICENSE("GPL");
--
2.7.4
More information about the dri-devel
mailing list