[PATCH v10 4/4] arm64: dts: zynqmp: zcu106-revA: Wire up the DisplayPort subsystem

[Laurent Pinchart]

Enable the dpsub device and wire it up to the PS-GTR PHY lanes routed to
the DisplayPort connector.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 .../arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 93ce7eb81498..4656f25b6b04 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -13,6 +13,7 @@
 #include "zynqmp-clk.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
 
 / {
 	model = "ZynqMP ZCU106 RevA";
@@ -69,6 +70,17 @@
 	status = "okay";
 };
 
+&dpdma {
+	status = "okay";
+};
+
+&dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&lane1 PHY_TYPE_DP 0 3 27000000>,
+	       <&lane0 PHY_TYPE_DP 1 3 27000000>;
+};
+
 /* fpd_dma clk 667MHz, lpd_dma 500MHz */
 &fpd_dma_chan1 {
 	status = "okay";
@@ -503,6 +515,10 @@
 	no-1-8-v;
 };
 
+&serdes {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
-- 
Regards,

Laurent Pinchart