[Freedreno] drm/msm: 'pp done time out' errors after async commit changes
Jeffrey Hugo
jeffrey.l.hugo at gmail.com
Mon Nov 11 14:51:22 UTC 2019
On Mon, Nov 11, 2019 at 4:38 AM Brian Masney <masneyb at onstation.org> wrote:
>
> On Sun, Nov 10, 2019 at 10:37:33AM -0700, Jeffrey Hugo wrote:
> > On Sun, Nov 10, 2019 at 6:53 AM Brian Masney <masneyb at onstation.org> wrote:
> > >
> > > On Fri, Nov 08, 2019 at 07:56:25AM -0700, Jeffrey Hugo wrote:
> > > There's a REG_MDP5_PP_AUTOREFRESH_CONFIG() macro upstream here:
> > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/gpu/drm/msm/disp/mdp5/mdp5.xml.h#n1383
> > >
> > > I'm not sure what to put in that register but I tried configuring it
> > > with a 1 this way and still have the same issue.
> > >
> > > diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c
> > > index eeef41fcd4e1..6b9acf68fd2c 100644
> > > --- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c
> > > +++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c
> > > @@ -80,6 +80,7 @@ static int pingpong_tearcheck_setup(struct drm_encoder *encoder,
> > > mdp5_write(mdp5_kms, REG_MDP5_PP_SYNC_THRESH(pp_id),
> > > MDP5_PP_SYNC_THRESH_START(4) |
> > > MDP5_PP_SYNC_THRESH_CONTINUE(4));
> > > + mdp5_write(mdp5_kms, REG_MDP5_PP_AUTOREFRESH_CONFIG(pp_id), 1);
> > >
> > > return 0;
> > > }
> >
> > bit 31 is the enable bit (set that to 1), bits 15:0 are the
> > frame_count (how many te events before the MDP sends a frame, I'd
> > recommend set to 1). Then after its programmed, you'll have to flush
> > the config, and probably use a _START to make sure the flush takes
> > effect.
>
> I think that I initially get autorefresh enabled based on your
> description above since the ping pong IRQs occur much more frequently.
> However pretty quickly the error 'dsi_err_worker: status=c' is shown,
> the contents on the screen shift to the right, and the screen no longer
> updates after that. That error decodes to
> DSI_ERR_STATE_DLN0_PHY | DSI_ERR_STATE_FIFO according to dsi_host.c.
>
> Here's the relevant code that I have so far:
So, Unless I missed it, you haven't disabled using _start when
autorefresh is enabled. If you are using both at the same time,
you'll overload the DSI and get those kinds of errors.
>
> diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c
> index eeef41fcd4e1..85a5cfe54ce8 100644
> --- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c
> @@ -157,6 +157,7 @@ void mdp5_cmd_encoder_enable(struct drm_encoder *encoder)
> struct mdp5_ctl *ctl = mdp5_cmd_enc->ctl;
> struct mdp5_interface *intf = mdp5_cmd_enc->intf;
> struct mdp5_pipeline *pipeline = mdp5_crtc_get_pipeline(encoder->crtc);
> + struct mdp5_kms *mdp5_kms = get_kms(encoder);;
>
> if (WARN_ON(mdp5_cmd_enc->enabled))
> return;
> @@ -167,6 +168,14 @@ void mdp5_cmd_encoder_enable(struct drm_encoder *encoder)
>
> mdp5_ctl_commit(ctl, pipeline, mdp_ctl_flush_mask_encoder(intf), true);
>
> + if (intf->type == INTF_DSI &&
> + intf->mode == MDP5_INTF_DSI_MODE_COMMAND) {
> + mdp5_write(mdp5_kms,
> + REG_MDP5_PP_AUTOREFRESH_CONFIG(pipeline->mixer->pp),
> + BIT(31) | BIT(0));
> + mdp5_crtc_flush_all(encoder->crtc);
> + }
> +
> mdp5_ctl_set_encoder_state(ctl, pipeline, true);
>
> mdp5_cmd_enc->enabled = true;
> diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c
> index 05cc04f729d6..369746ebbc42 100644
> --- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c
> +++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c
> @@ -103,7 +104,7 @@ static u32 crtc_flush(struct drm_crtc *crtc, u32 flush_mask)
> * so that we can safely queue unref to current fb (ie. next
> * vblank we know hw is done w/ previous scanout_fb).
> */
> -static u32 crtc_flush_all(struct drm_crtc *crtc)
> +u32 mdp5_crtc_flush_all(struct drm_crtc *crtc)
> {
> struct mdp5_crtc_state *mdp5_cstate = to_mdp5_crtc_state(crtc->state);
> struct mdp5_hw_mixer *mixer, *r_mixer;
> @@ -734,7 +735,7 @@ static void mdp5_crtc_atomic_flush(struct drm_crtc *crtc,
> if (mdp5_cstate->cmd_mode)
> request_pp_done_pending(crtc);
>
> - mdp5_crtc->flushed_mask = crtc_flush_all(crtc);
> + mdp5_crtc->flushed_mask = mdp5_crtc_flush_all(crtc);
>
> /* XXX are we leaking out state here? */
> mdp5_crtc->vblank.irqmask = mdp5_cstate->vblank_irqmask;
> diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.h b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.h
> index 128866742593..3490328ab63e 100644
> --- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.h
> +++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.h
> @@ -278,6 +278,7 @@ enum mdp5_pipe mdp5_plane_right_pipe(struct drm_plane *plane);
> struct drm_plane *mdp5_plane_init(struct drm_device *dev,
> enum drm_plane_type type);
>
> +u32 mdp5_crtc_flush_all(struct drm_crtc *crtc);
> struct mdp5_ctl *mdp5_crtc_get_ctl(struct drm_crtc *crtc);
> uint32_t mdp5_crtc_vblank(struct drm_crtc *crtc);
>
>
> Note that mdp5_ctl_set_encoder_state() will call send_start_signal()
> for a command-mode panel.
>
> I put a HERE log statement in request_pp_done_pending() and
> mdp5_crtc_pp_done_irq() and here's the relevant part of dmesg:
>
> [ 13.832596] msm fd900000.mdss: pp done time out, lm=0
> [ 13.832690] request_pp_done_pending: HERE
> [ 13.899890] mdp5_crtc_pp_done_irq: HERE
> [ 13.899981] Console: switching to colour frame buffer device 135x120
> [ 13.916662] mdp5_crtc_pp_done_irq: HERE
> [ 13.916813] request_pp_done_pending: HERE
> [ 13.933439] mdp5_crtc_pp_done_irq: HERE
> [ 13.950217] mdp5_crtc_pp_done_irq: HERE
> [ 13.950295] request_pp_done_pending: HERE
> [ 13.959973] msm fd900000.mdss: fb0: msmdrmfb frame buffer device
> [ 13.964469] i2c i2c-4: Added multiplexed i2c bus 5
> [ 13.966998] mdp5_crtc_pp_done_irq: HERE
> [ 13.983780] mdp5_crtc_pp_done_irq: HERE
> [ 13.983932] request_pp_done_pending: HERE
> [ 14.000617] mdp5_crtc_pp_done_irq: HERE
> [ 14.017393] mdp5_crtc_pp_done_irq: HERE
> [ 14.017539] request_pp_done_pending: HERE
> [ 14.034173] mdp5_crtc_pp_done_irq: HERE
> [ 14.050956] mdp5_crtc_pp_done_irq: HERE
> [ 14.067738] mdp5_crtc_pp_done_irq: HERE
> [ 14.084521] mdp5_crtc_pp_done_irq: HERE
> [ 14.101305] mdp5_crtc_pp_done_irq: HERE
> [ 14.118085] mdp5_crtc_pp_done_irq: HERE
> [ 14.134866] mdp5_crtc_pp_done_irq: HERE
> [ 14.151646] mdp5_crtc_pp_done_irq: HERE
> [ 14.168425] mdp5_crtc_pp_done_irq: HERE
> [ 14.185204] mdp5_crtc_pp_done_irq: HERE
> [ 14.192790] request_pp_done_pending: HERE
> [ 14.192967] dsi_err_worker: status=c
> [ 14.241759] dsi_err_worker: status=c
> [ 14.252650] msm fd900000.mdss: pp done time out, lm=0
> [ 14.462645] msm fd900000.mdss: pp done time out, lm=0
> [ 14.462704] request_pp_done_pending: HERE
> [ 14.522644] msm fd900000.mdss: pp done time out, lm=0
> [ 14.672643] msm fd900000.mdss: pp done time out, lm=0
> [ 14.672702] request_pp_done_pending: HERE
> [ 14.732643] msm fd900000.mdss: pp done time out, lm=0
> [ 14.882644] msm fd900000.mdss: pp done time out, lm=0
>
> Brian
More information about the dri-devel
mailing list