[PATCH v4 05/13] drm/bridge: Repurpose lvds-encoder.c
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Tue Nov 19 00:00:47 UTC 2019
Hi Fabrizio,
Thank you for the patch.
On Wed, Nov 13, 2019 at 03:51:24PM +0000, Fabrizio Castro wrote:
> lvds-encoder.c implementation is also suitable for LVDS decoders,
> not just LVDS encoders.
> Instead of creating a new driver for addressing support for
> transparent LVDS decoders, repurpose lvds-encoder.c for the greater
> good with this patch.
>
> This patch only "rebrands" the lvds-encoder.c driver, to make it
> suitable for hosting LVDS decoders support. The actual support for
> LVDS decoders will come with a later patch.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro at bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> ---
> v3->v4:
> * The patch now only renames the driver (with related data structures
> and build options), changes the description of the module, and
> refreshes the copyright
> v2->v3:
> * No change
> v1->v2:
> * No change
> ---
> drivers/gpu/drm/bridge/Kconfig | 8 +-
> drivers/gpu/drm/bridge/Makefile | 2 +-
> .../drm/bridge/{lvds-encoder.c => lvds-codec.c} | 97 +++++++++++-----------
> 3 files changed, 53 insertions(+), 54 deletions(-)
> rename drivers/gpu/drm/bridge/{lvds-encoder.c => lvds-codec.c} (45%)
>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 3436297..fbbea46 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -45,14 +45,14 @@ config DRM_DUMB_VGA_DAC
> Support for non-programmable RGB to VGA DAC bridges, such as ADI
> ADV7123, TI THS8134 and THS8135 or passive resistor ladder DACs.
>
> -config DRM_LVDS_ENCODER
> - tristate "Transparent parallel to LVDS encoder support"
> +config DRM_LVDS_CODEC
> + tristate "Transparent LVDS encoders and decoders support"
> depends on OF
> select DRM_KMS_HELPER
> select DRM_PANEL_BRIDGE
> help
> - Support for transparent parallel to LVDS encoders that don't require
> - any configuration.
> + Support for transparent LVDS encoders and decoders that don't
> + require any configuration.
>
> config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW
> tristate "MegaChips stdp4028-ge-b850v3-fw and stdp2690-ge-b850v3-fw"
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index 4934fcf..8a9178a 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -2,7 +2,7 @@
> obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o
> obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o
> obj-$(CONFIG_DRM_DUMB_VGA_DAC) += dumb-vga-dac.o
> -obj-$(CONFIG_DRM_LVDS_ENCODER) += lvds-encoder.o
> +obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o
> obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o
> obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
> obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
> diff --git a/drivers/gpu/drm/bridge/lvds-encoder.c b/drivers/gpu/drm/bridge/lvds-codec.c
> similarity index 45%
> rename from drivers/gpu/drm/bridge/lvds-encoder.c
> rename to drivers/gpu/drm/bridge/lvds-codec.c
> index e2132a8..b5801a2 100644
> --- a/drivers/gpu/drm/bridge/lvds-encoder.c
> +++ b/drivers/gpu/drm/bridge/lvds-codec.c
> @@ -1,5 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0-or-later
> /*
> + * Copyright (C) 2019 Renesas Electronics Corporation
> * Copyright (C) 2016 Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> */
>
> @@ -12,65 +13,62 @@
> #include <drm/drm_bridge.h>
> #include <drm/drm_panel.h>
>
> -struct lvds_encoder {
> +struct lvds_codec {
> struct drm_bridge bridge;
> struct drm_bridge *panel_bridge;
> struct gpio_desc *powerdown_gpio;
> };
>
> -static int lvds_encoder_attach(struct drm_bridge *bridge)
> +static int lvds_codec_attach(struct drm_bridge *bridge)
> {
> - struct lvds_encoder *lvds_encoder = container_of(bridge,
> - struct lvds_encoder,
> - bridge);
> + struct lvds_codec *lvds_codec = container_of(bridge,
> + struct lvds_codec, bridge);
>
> - return drm_bridge_attach(bridge->encoder, lvds_encoder->panel_bridge,
> + return drm_bridge_attach(bridge->encoder, lvds_codec->panel_bridge,
> bridge);
> }
>
> -static void lvds_encoder_enable(struct drm_bridge *bridge)
> +static void lvds_codec_enable(struct drm_bridge *bridge)
> {
> - struct lvds_encoder *lvds_encoder = container_of(bridge,
> - struct lvds_encoder,
> - bridge);
> + struct lvds_codec *lvds_codec = container_of(bridge,
> + struct lvds_codec, bridge);
>
> - if (lvds_encoder->powerdown_gpio)
> - gpiod_set_value_cansleep(lvds_encoder->powerdown_gpio, 0);
> + if (lvds_codec->powerdown_gpio)
> + gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 0);
> }
>
> -static void lvds_encoder_disable(struct drm_bridge *bridge)
> +static void lvds_codec_disable(struct drm_bridge *bridge)
> {
> - struct lvds_encoder *lvds_encoder = container_of(bridge,
> - struct lvds_encoder,
> - bridge);
> + struct lvds_codec *lvds_codec = container_of(bridge,
> + struct lvds_codec, bridge);
>
> - if (lvds_encoder->powerdown_gpio)
> - gpiod_set_value_cansleep(lvds_encoder->powerdown_gpio, 1);
> + if (lvds_codec->powerdown_gpio)
> + gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 1);
> }
>
> static struct drm_bridge_funcs funcs = {
> - .attach = lvds_encoder_attach,
> - .enable = lvds_encoder_enable,
> - .disable = lvds_encoder_disable,
> + .attach = lvds_codec_attach,
> + .enable = lvds_codec_enable,
> + .disable = lvds_codec_disable,
> };
>
> -static int lvds_encoder_probe(struct platform_device *pdev)
> +static int lvds_codec_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct device_node *port;
> struct device_node *endpoint;
> struct device_node *panel_node;
> struct drm_panel *panel;
> - struct lvds_encoder *lvds_encoder;
> + struct lvds_codec *lvds_codec;
>
> - lvds_encoder = devm_kzalloc(dev, sizeof(*lvds_encoder), GFP_KERNEL);
> - if (!lvds_encoder)
> + lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL);
> + if (!lvds_codec)
> return -ENOMEM;
>
> - lvds_encoder->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown",
> - GPIOD_OUT_HIGH);
> - if (IS_ERR(lvds_encoder->powerdown_gpio)) {
> - int err = PTR_ERR(lvds_encoder->powerdown_gpio);
> + lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(lvds_codec->powerdown_gpio)) {
> + int err = PTR_ERR(lvds_codec->powerdown_gpio);
>
> if (err != -EPROBE_DEFER)
> dev_err(dev, "powerdown GPIO failure: %d\n", err);
> @@ -105,51 +103,52 @@ static int lvds_encoder_probe(struct platform_device *pdev)
> return PTR_ERR(panel);
> }
>
> - lvds_encoder->panel_bridge =
> + lvds_codec->panel_bridge =
> devm_drm_panel_bridge_add_typed(dev, panel,
> DRM_MODE_CONNECTOR_LVDS);
> - if (IS_ERR(lvds_encoder->panel_bridge))
> - return PTR_ERR(lvds_encoder->panel_bridge);
> + if (IS_ERR(lvds_codec->panel_bridge))
> + return PTR_ERR(lvds_codec->panel_bridge);
>
> - /* The panel_bridge bridge is attached to the panel's of_node,
> + /*
> + * The panel_bridge bridge is attached to the panel's of_node,
> * but we need a bridge attached to our of_node for our user
> * to look up.
> */
> - lvds_encoder->bridge.of_node = dev->of_node;
> - lvds_encoder->bridge.funcs = &funcs;
> - drm_bridge_add(&lvds_encoder->bridge);
> + lvds_codec->bridge.of_node = dev->of_node;
> + lvds_codec->bridge.funcs = &funcs;
> + drm_bridge_add(&lvds_codec->bridge);
>
> - platform_set_drvdata(pdev, lvds_encoder);
> + platform_set_drvdata(pdev, lvds_codec);
>
> return 0;
> }
>
> -static int lvds_encoder_remove(struct platform_device *pdev)
> +static int lvds_codec_remove(struct platform_device *pdev)
> {
> - struct lvds_encoder *lvds_encoder = platform_get_drvdata(pdev);
> + struct lvds_codec *lvds_codec = platform_get_drvdata(pdev);
>
> - drm_bridge_remove(&lvds_encoder->bridge);
> + drm_bridge_remove(&lvds_codec->bridge);
>
> return 0;
> }
>
> -static const struct of_device_id lvds_encoder_match[] = {
> +static const struct of_device_id lvds_codec_match[] = {
> { .compatible = "lvds-encoder" },
> { .compatible = "thine,thc63lvdm83d" },
> {},
> };
> -MODULE_DEVICE_TABLE(of, lvds_encoder_match);
> +MODULE_DEVICE_TABLE(of, lvds_codec_match);
>
> -static struct platform_driver lvds_encoder_driver = {
> - .probe = lvds_encoder_probe,
> - .remove = lvds_encoder_remove,
> +static struct platform_driver lvds_codec_driver = {
> + .probe = lvds_codec_probe,
> + .remove = lvds_codec_remove,
> .driver = {
> - .name = "lvds-encoder",
> - .of_match_table = lvds_encoder_match,
> + .name = "lvds-codec",
> + .of_match_table = lvds_codec_match,
> },
> };
> -module_platform_driver(lvds_encoder_driver);
> +module_platform_driver(lvds_codec_driver);
>
> MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart at ideasonboard.com>");
> -MODULE_DESCRIPTION("Transparent parallel to LVDS encoder");
> +MODULE_DESCRIPTION("LVDS encoders and decoders");
> MODULE_LICENSE("GPL");
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list