[PATCH v4] pci: prevent putting nvidia GPUs into lower device states on certain intel bridges

[Mika Westerberg]

On Wed, Nov 20, 2019 at 05:53:07PM +0200, Mika Westerberg wrote:
> On Wed, Nov 20, 2019 at 04:37:14PM +0100, Karol Herbst wrote:
> > On Wed, Nov 20, 2019 at 4:15 PM Mika Westerberg
> > <mika.westerberg at intel.com> wrote:
> > >
> > > On Wed, Nov 20, 2019 at 01:11:52PM +0100, Karol Herbst wrote:
> > > > On Wed, Nov 20, 2019 at 1:09 PM Mika Westerberg
> > > > <mika.westerberg at intel.com> wrote:
> > > > >
> > > > > On Wed, Nov 20, 2019 at 12:58:00PM +0100, Karol Herbst wrote:
> > > > > > overall, what I really want to know is, _why_ does it work on windows?
> > > > >
> > > > > So do I ;-)
> > > > >
> > > > > > Or what are we doing differently on Linux so that it doesn't work? If
> > > > > > anybody has any idea on how we could dig into this and figure it out
> > > > > > on this level, this would probably allow us to get closer to the root
> > > > > > cause? no?
> > > > >
> > > > > Have you tried to use the acpi_rev_override parameter in your system and
> > > > > does it have any effect?
> > > > >
> > > > > Also did you try to trace the ACPI _ON/_OFF() methods? I think that
> > > > > should hopefully reveal something.
> > > > >
> > > >
> > > > I think I did in the past and it seemed to have worked, there is just
> > > > one big issue with this: it's a Dell specific workaround afaik, and
> > > > this issue plagues not just Dell, but we've seen it on HP and Lenovo
> > > > laptops as well, and I've heard about users having the same issues on
> > > > Asus and MSI laptops as well.
> > >
> > > Maybe it is not a workaround at all but instead it simply determines
> > > whether the system supports RTD3 or something like that (IIRC Windows 8
> > > started supporting it). Maybe Dell added check for Linux because at that
> > > time Linux did not support it.
> > >
> > 
> > the point is, it's not checking it by default, so by default you still
> > run into the windows 8 codepath.
> 
> Well you can add the quirk to acpi_rev_dmi_table[] so it goes to that
> path by default. There are a bunch of similar entries for Dell machines.
> 
> Of course this does not help the non-Dell users so we would still need
> to figure out the root cause.

I think I asked you to test the PCIe delay patch and it did not help but
I wonder if it helps if we increase the delay. As an experiment could
you try Bjorn's pci/pm branch. The last two commits are for the delay.

If you could pull that branch and apply the following patch on top and
give it a try? Then post the dmesg somewhere so we can see whether it
did the delay at all.

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 1f319b1175da..1ad6f1372ed5 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -4697,12 +4697,7 @@ void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev)
 		return;
 	}
 
-	/* Take d3cold_delay requirements into account */
-	delay = pci_bus_max_d3cold_delay(dev->subordinate);
-	if (!delay) {
-		up_read(&pci_bus_sem);
-		return;
-	}
+	delay = 500;
 
 	child = list_first_entry(&dev->subordinate->devices, struct pci_dev,
 				 bus_list);
@@ -4715,7 +4710,7 @@ void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev)
 	 * management for them (see pci_bridge_d3_possible()).
 	 */
 	if (!pci_is_pcie(dev)) {
-		pci_dbg(dev, "waiting %d ms for secondary bus\n", 1000 + delay);
+		pci_info(dev, "waiting %d ms for secondary bus\n", 1000 + delay);
 		msleep(1000 + delay);
 		return;
 	}
@@ -4741,10 +4736,10 @@ void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev)
 		return;
 
 	if (pcie_get_speed_cap(dev) <= PCIE_SPEED_5_0GT) {
-		pci_dbg(dev, "waiting %d ms for downstream link\n", delay);
+		pci_info(dev, "waiting %d ms for downstream link\n", delay);
 		msleep(delay);
 	} else {
-		pci_dbg(dev, "waiting %d ms for downstream link, after activation\n",
+		pci_info(dev, "waiting %d ms for downstream link, after activation\n",
 			delay);
 		if (!pcie_wait_for_link_delay(dev, true, delay)) {
 			/* Did not train, no need to wait any further */
@@ -4753,7 +4748,7 @@ void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev)
 	}
 
 	if (!pci_device_is_present(child)) {
-		pci_dbg(child, "waiting additional %d ms to become accessible\n", delay);
+		pci_info(child, "waiting additional %d ms to become accessible\n", delay);
 		msleep(delay);
 	}
 }