[PATCH AUTOSEL 4.19 13/25] drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.

[Sasha Levin]

From: Yunhao Tian <t123yh at outlook.com>

[ Upstream commit 0b8e7bbde5e7e2c419567e1ee29587dae3b78ee3 ]

The datasheet of V3s (and various other chips) wrote
that TCON0_DCLK_DIV can be >= 1 if only dclk is used,
and must >= 6 if dclk1 or dclk2 is used. As currently
neither dclk1 nor dclk2 is used (no writes to these
bits), let's set minimal division to 1.

If this minimal division is 6, some common dot clock
frequencies can't be produced (e.g. 30MHz will not be
possible and will fallback to 25MHz), which is
obviously not an expected behaviour.

Signed-off-by: Yunhao Tian <t123yh at outlook.com>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
Link: https://lore.kernel.org/linux-arm-kernel/MN2PR08MB57905AD8A00C08DA219377C989760@MN2PR08MB5790.namprd08.prod.outlook.com/
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 8c31c9ab06f8b..fda1ae12069a7 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -423,7 +423,7 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
 
 	WARN_ON(!tcon->quirks->has_channel_0);
 
-	tcon->dclk_min_div = 6;
+	tcon->dclk_min_div = 1;
 	tcon->dclk_max_div = 127;
 	sun4i_tcon0_mode_set_common(tcon, mode);
 
-- 
2.20.1