[PATCH 7/7] drm/udl: Move udl_handle_damage() into udl_modeset.c
Daniel Vetter
daniel at ffwll.ch
Thu Nov 28 14:15:27 UTC 2019
On Tue, Nov 26, 2019 at 02:47:07PM +0100, Thomas Zimmermann wrote:
> The only caller of udl_handle_damage() in the plane-update function
> in udl_modeset.c. Move udl_handle_damage() there, make it static, and
> remove several left-over macros.
>
> Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
> ---
> drivers/gpu/drm/udl/Makefile | 2 +-
> drivers/gpu/drm/udl/udl_drv.h | 3 -
> drivers/gpu/drm/udl/udl_fb.c | 142 ------------------------------
> drivers/gpu/drm/udl/udl_modeset.c | 88 ++++++++++++++++++
> 4 files changed, 89 insertions(+), 146 deletions(-)
> delete mode 100644 drivers/gpu/drm/udl/udl_fb.c
>
> diff --git a/drivers/gpu/drm/udl/Makefile b/drivers/gpu/drm/udl/Makefile
> index 177ce74f4cf4..b50179bb4de0 100644
> --- a/drivers/gpu/drm/udl/Makefile
> +++ b/drivers/gpu/drm/udl/Makefile
> @@ -1,4 +1,4 @@
> # SPDX-License-Identifier: GPL-2.0-only
> -udl-y := udl_drv.o udl_modeset.o udl_connector.o udl_main.o udl_fb.o udl_transfer.o udl_gem.o
> +udl-y := udl_drv.o udl_modeset.o udl_connector.o udl_main.o udl_transfer.o udl_gem.o
>
> obj-$(CONFIG_DRM_UDL) := udl.o
> diff --git a/drivers/gpu/drm/udl/udl_drv.h b/drivers/gpu/drm/udl/udl_drv.h
> index e540f8e64aa1..ab62a6aecd06 100644
> --- a/drivers/gpu/drm/udl/udl_drv.h
> +++ b/drivers/gpu/drm/udl/udl_drv.h
> @@ -93,9 +93,6 @@ int udl_render_hline(struct drm_device *dev, int log_bpp, struct urb **urb_ptr,
> struct drm_gem_object *udl_driver_gem_create_object(struct drm_device *dev,
> size_t size);
>
> -int udl_handle_damage(struct drm_framebuffer *fb, int x, int y,
> - int width, int height);
> -
> int udl_drop_usb(struct drm_device *dev);
>
> #define CMD_WRITE_RAW8 "\xAF\x60" /**< 8 bit raw write command. */
> diff --git a/drivers/gpu/drm/udl/udl_fb.c b/drivers/gpu/drm/udl/udl_fb.c
> deleted file mode 100644
> index 3d8cf674dfa5..000000000000
> --- a/drivers/gpu/drm/udl/udl_fb.c
> +++ /dev/null
> @@ -1,142 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * Copyright (C) 2012 Red Hat
> - *
> - * based in parts on udlfb.c:
> - * Copyright (C) 2009 Roberto De Ioris <roberto at unbit.it>
> - * Copyright (C) 2009 Jaya Kumar <jayakumar.lkml at gmail.com>
> - * Copyright (C) 2009 Bernie Thompson <bernie at plugable.com>
> - */
> -
> -#include <linux/moduleparam.h>
> -
> -#include <drm/drm_fourcc.h>
> -#include <drm/drm_gem_shmem_helper.h>
> -
> -#include "udl_drv.h"
> -
> -#define DL_ALIGN_UP(x, a) ALIGN(x, a)
> -#define DL_ALIGN_DOWN(x, a) ALIGN_DOWN(x, a)
> -
> -/** Read the red component (0..255) of a 32 bpp colour. */
> -#define DLO_RGB_GETRED(col) (uint8_t)((col) & 0xFF)
> -
> -/** Read the green component (0..255) of a 32 bpp colour. */
> -#define DLO_RGB_GETGRN(col) (uint8_t)(((col) >> 8) & 0xFF)
> -
> -/** Read the blue component (0..255) of a 32 bpp colour. */
> -#define DLO_RGB_GETBLU(col) (uint8_t)(((col) >> 16) & 0xFF)
> -
> -/** Return red/green component of a 16 bpp colour number. */
> -#define DLO_RG16(red, grn) (uint8_t)((((red) & 0xF8) | ((grn) >> 5)) & 0xFF)
> -
> -/** Return green/blue component of a 16 bpp colour number. */
> -#define DLO_GB16(grn, blu) (uint8_t)(((((grn) & 0x1C) << 3) | ((blu) >> 3)) & 0xFF)
> -
> -/** Return 8 bpp colour number from red, green and blue components. */
> -#define DLO_RGB8(red, grn, blu) ((((red) << 5) | (((grn) & 3) << 3) | ((blu) & 7)) & 0xFF)
> -
> -#if 0
> -static uint8_t rgb8(uint32_t col)
> -{
> - uint8_t red = DLO_RGB_GETRED(col);
> - uint8_t grn = DLO_RGB_GETGRN(col);
> - uint8_t blu = DLO_RGB_GETBLU(col);
> -
> - return DLO_RGB8(red, grn, blu);
> -}
> -
> -static uint16_t rgb16(uint32_t col)
> -{
> - uint8_t red = DLO_RGB_GETRED(col);
> - uint8_t grn = DLO_RGB_GETGRN(col);
> - uint8_t blu = DLO_RGB_GETBLU(col);
> -
> - return (DLO_RG16(red, grn) << 8) + DLO_GB16(grn, blu);
> -}
> -#endif
> -
> -int udl_handle_damage(struct drm_framebuffer *fb, int x, int y,
> - int width, int height)
> -{
> - struct drm_device *dev = fb->dev;
> - struct udl_device *udl = to_udl(dev);
> - int i, ret;
> - char *cmd;
> - cycles_t start_cycles, end_cycles;
> - int bytes_sent = 0;
> - int bytes_identical = 0;
> - struct urb *urb;
> - int aligned_x;
> - int log_bpp;
> - void *vaddr;
> -
> - if (WARN_ON(!is_power_of_2(fb->format->cpp[0])))
> - return -EINVAL;
> -
> - log_bpp = __ffs(fb->format->cpp[0]);
> -
> - vaddr = drm_gem_shmem_vmap(fb->obj[0]);
> - if (IS_ERR(vaddr)) {
> - DRM_ERROR("failed to vmap fb\n");
> - return 0;
> - }
> -
> - aligned_x = DL_ALIGN_DOWN(x, sizeof(unsigned long));
> - width = DL_ALIGN_UP(width + (x-aligned_x), sizeof(unsigned long));
> - x = aligned_x;
> -
> - if ((width <= 0) ||
> - (x + width > fb->width) ||
> - (y + height > fb->height)) {
> - ret = -EINVAL;
> - goto err_drm_gem_shmem_vunmap;
> - }
> -
> - start_cycles = get_cycles();
> -
> - urb = udl_get_urb(dev);
> - if (!urb)
> - goto out;
> - cmd = urb->transfer_buffer;
> -
> - for (i = y; i < y + height ; i++) {
> - const int line_offset = fb->pitches[0] * i;
> - const int byte_offset = line_offset + (x << log_bpp);
> - const int dev_byte_offset = (fb->width * i + x) << log_bpp;
> - if (udl_render_hline(dev, log_bpp, &urb, (char *)vaddr,
> - &cmd, byte_offset, dev_byte_offset,
> - width << log_bpp,
> - &bytes_identical, &bytes_sent))
> - goto error;
> - }
> -
> - if (cmd > (char *) urb->transfer_buffer) {
> - /* Send partial buffer remaining before exiting */
> - int len;
> - if (cmd < (char *) urb->transfer_buffer + urb->transfer_buffer_length)
> - *cmd++ = 0xAF;
> - len = cmd - (char *) urb->transfer_buffer;
> - ret = udl_submit_urb(dev, urb, len);
> - bytes_sent += len;
> - } else
> - udl_urb_completion(urb);
> -
> -error:
> - atomic_add(bytes_sent, &udl->bytes_sent);
> - atomic_add(bytes_identical, &udl->bytes_identical);
> - atomic_add((width * height) << log_bpp, &udl->bytes_rendered);
> - end_cycles = get_cycles();
> - atomic_add(((unsigned int) ((end_cycles - start_cycles)
> - >> 10)), /* Kcycles */
> - &udl->cpu_kcycles_used);
> -
> -out:
> - drm_gem_shmem_vunmap(fb->obj[0], vaddr);
> -
> - return 0;
> -
> -err_drm_gem_shmem_vunmap:
> - drm_gem_shmem_vunmap(fb->obj[0], vaddr);
> - return ret;
> -}
> diff --git a/drivers/gpu/drm/udl/udl_modeset.c b/drivers/gpu/drm/udl/udl_modeset.c
> index 83e80083e0b2..7107c90672ae 100644
> --- a/drivers/gpu/drm/udl/udl_modeset.c
> +++ b/drivers/gpu/drm/udl/udl_modeset.c
> @@ -12,7 +12,9 @@
> #include <drm/drm_atomic_helper.h>
> #include <drm/drm_crtc_helper.h>
> #include <drm/drm_damage_helper.h>
> +#include <drm/drm_fourcc.h>
> #include <drm/drm_gem_framebuffer_helper.h>
> +#include <drm/drm_gem_shmem_helper.h>
> #include <drm/drm_modeset_helper_vtables.h>
> #include <drm/drm_vblank.h>
>
> @@ -282,6 +284,92 @@ static void udl_crtc_dpms(struct drm_crtc *crtc, int mode)
>
> }
>
> +static int udl_handle_damage(struct drm_framebuffer *fb, int x, int y,
> + int width, int height)
> +{
> + struct drm_device *dev = fb->dev;
> + struct udl_device *udl = to_udl(dev);
> + int i, ret;
> + char *cmd;
> + cycles_t start_cycles, end_cycles;
> + int bytes_sent = 0;
> + int bytes_identical = 0;
> + struct urb *urb;
> + int aligned_x;
> + int log_bpp;
> + void *vaddr;
> +
> + if (WARN_ON(!is_power_of_2(fb->format->cpp[0])))
> + return -EINVAL;
> +
> + log_bpp = __ffs(fb->format->cpp[0]);
> +
> + vaddr = drm_gem_shmem_vmap(fb->obj[0]);
> + if (IS_ERR(vaddr)) {
> + DRM_ERROR("failed to vmap fb\n");
> + return 0;
> + }
> +
> + aligned_x = ALIGN_DOWN(x, sizeof(unsigned long));
> + width = ALIGN(width + (x-aligned_x), sizeof(unsigned long));
> + x = aligned_x;
> +
> + if ((width <= 0) ||
> + (x + width > fb->width) ||
> + (y + height > fb->height)) {
> + ret = -EINVAL;
> + goto err_drm_gem_shmem_vunmap;
> + }
> +
> + start_cycles = get_cycles();
> +
> + urb = udl_get_urb(dev);
> + if (!urb)
> + goto out;
> + cmd = urb->transfer_buffer;
> +
> + for (i = y; i < y + height ; i++) {
> + const int line_offset = fb->pitches[0] * i;
> + const int byte_offset = line_offset + (x << log_bpp);
> + const int dev_byte_offset = (fb->width * i + x) << log_bpp;
> +
> + if (udl_render_hline(dev, log_bpp, &urb, (char *)vaddr,
> + &cmd, byte_offset, dev_byte_offset,
> + width << log_bpp,
> + &bytes_identical, &bytes_sent))
> + goto error;
> + }
> +
> + if (cmd > (char *) urb->transfer_buffer) {
> + /* Send partial buffer remaining before exiting */
> + int len;
> + if (cmd < (char *) urb->transfer_buffer + urb->transfer_buffer_length)
> + *cmd++ = 0xAF;
> + len = cmd - (char *) urb->transfer_buffer;
> + ret = udl_submit_urb(dev, urb, len);
> + bytes_sent += len;
> + } else
> + udl_urb_completion(urb);
> +
> +error:
> + atomic_add(bytes_sent, &udl->bytes_sent);
> + atomic_add(bytes_identical, &udl->bytes_identical);
> + atomic_add((width * height) << log_bpp, &udl->bytes_rendered);
> + end_cycles = get_cycles();
> + atomic_add(((unsigned int) ((end_cycles - start_cycles)
> + >> 10)), /* Kcycles */
> + &udl->cpu_kcycles_used);
> +
> +out:
> + drm_gem_shmem_vunmap(fb->obj[0], vaddr);
> +
> + return 0;
> +
> +err_drm_gem_shmem_vunmap:
> + drm_gem_shmem_vunmap(fb->obj[0], vaddr);
> + return ret;
> +}
> +
> /*
> * Simple display pipeline
> */
> --
> 2.23.0
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the dri-devel
mailing list