[PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts

[Tomi Valkeinen]

On 30/09/2019 20:48, Tero Kristo wrote:

> Hmmh, after some testing, it seems there is bad stuff happening with the 
> divider clock implementation, I am re-working it as of now. Basically 
> what is wrong is that with a divider max value of say 16, the driver 
> attempts to craft the max value into a mask, but this ends up being 
> 0x1f. If the max value is 15, it ends up into 0xf which is correct.

Ok, that explains the max not working.

It doesn't explain the other issue, where the TRM says the max div is 
32, but it does not work. But taking the max div from the old SoCs, 16, 
is not correct either, as it seems that dividers up to 31 work ok.

  Tomi

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki