[PATCH 2/4] drm/edid: Extract drm_mode_cea_vic()

[Ville Syrjala]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Extract the logic to compute the final CEA VIC to a small helper.
We'll reorder it a bit to make future modifications more
straightforward. No function changes.

Cc: Wayne Lin <waynelin at amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/drm_edid.c | 53 +++++++++++++++++++++-----------------
 1 file changed, 30 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 3df8267adab9..495b7fb4d9ef 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -5160,6 +5160,35 @@ drm_hdmi_infoframe_set_hdr_metadata(struct hdmi_drm_infoframe *frame,
 }
 EXPORT_SYMBOL(drm_hdmi_infoframe_set_hdr_metadata);
 
+static u8 drm_mode_cea_vic(struct drm_connector *connector,
+			   const struct drm_display_mode *mode)
+{
+	u8 vendor_if_vic = drm_match_hdmi_mode(mode);
+	bool is_s3d = mode->flags & DRM_MODE_FLAG_3D_MASK;
+	u8 vic;
+
+	/*
+	 * HDMI spec says if a mode is found in HDMI 1.4b 4K modes
+	 * we should send its VIC in vendor infoframes, else send the
+	 * VIC in AVI infoframes. Lets check if this mode is present in
+	 * HDMI 1.4b 4K modes
+	 */
+	if (drm_valid_hdmi_vic(vendor_if_vic) && !is_s3d)
+		return 0;
+
+	vic = drm_match_cea_mode(mode);
+
+	/*
+	 * HDMI 1.4 VIC range: 1 <= VIC <= 64 (CEA-861-D) but
+	 * HDMI 2.0 VIC range: 1 <= VIC <= 107 (CEA-861-F). So we
+	 * have to make sure we dont break HDMI 1.4 sinks.
+	 */
+	if (!is_hdmi2_sink(connector) && vic > 64)
+		return 0;
+
+	return vic;
+}
+
 /**
  * drm_hdmi_avi_infoframe_from_display_mode() - fill an HDMI AVI infoframe with
  *                                              data from a DRM display mode
@@ -5187,29 +5216,7 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
 	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
 		frame->pixel_repeat = 1;
 
-	frame->video_code = drm_match_cea_mode(mode);
-
-	/*
-	 * HDMI 1.4 VIC range: 1 <= VIC <= 64 (CEA-861-D) but
-	 * HDMI 2.0 VIC range: 1 <= VIC <= 107 (CEA-861-F). So we
-	 * have to make sure we dont break HDMI 1.4 sinks.
-	 */
-	if (!is_hdmi2_sink(connector) && frame->video_code > 64)
-		frame->video_code = 0;
-
-	/*
-	 * HDMI spec says if a mode is found in HDMI 1.4b 4K modes
-	 * we should send its VIC in vendor infoframes, else send the
-	 * VIC in AVI infoframes. Lets check if this mode is present in
-	 * HDMI 1.4b 4K modes
-	 */
-	if (frame->video_code) {
-		u8 vendor_if_vic = drm_match_hdmi_mode(mode);
-		bool is_s3d = mode->flags & DRM_MODE_FLAG_3D_MASK;
-
-		if (drm_valid_hdmi_vic(vendor_if_vic) && !is_s3d)
-			frame->video_code = 0;
-	}
+	frame->video_code = drm_mode_cea_vic(connector, mode);
 
 	frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE;
 
-- 
2.21.0