[PATCH v2 RESEND] drm/bridge: dw-hdmi: Restore audio when setting a mode

Neil Armstrong narmstrong at baylibre.com
Mon Oct 7 11:57:52 UTC 2019


Hi,

On 03/10/2019 06:14, Cheng-Yi Chiang wrote:
> From: Daniel Kurtz <djkurtz at chromium.org>
> 
> When setting a new display mode, dw_hdmi_setup() calls
> dw_hdmi_enable_video_path(), which disables all hdmi clocks, including
> the audio clock.
> 
> We should only (re-)enable the audio clock if audio was already enabled
> when setting the new mode.
> 
> Without this patch, on RK3288, there will be HDMI audio on some monitors
> if i2s was played to headphone when the monitor was plugged.
> ACER H277HU and ASUS PB278 are two of the monitors showing this issue.
> 
> Signed-off-by: Cheng-Yi Chiang <cychiang at chromium.org>
> Signed-off-by: Daniel Kurtz <djkurtz at chromium.org>
> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
> ---
>  Change from v1 to v2:
>   - Use audio_lock to protect audio clock.
>   - Fix the patch title.
> 
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 13 ++++++++++++-
>  1 file changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index aa7efd4da1c8..749d8e4c535b 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -1982,6 +1982,17 @@ static void hdmi_disable_overflow_interrupts(struct dw_hdmi *hdmi)
>  		    HDMI_IH_MUTE_FC_STAT2);
>  }
>  
> +static void dw_hdmi_audio_restore(struct dw_hdmi *hdmi)
> +{
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&hdmi->audio_lock, flags);
> +
> +	hdmi_enable_audio_clk(hdmi, hdmi->audio_enable);
> +
> +	spin_unlock_irqrestore(&hdmi->audio_lock, flags);

Dumb question, why is this protected by a spinlock ?

Neil

> +}
> +
>  static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
>  {
>  	int ret;
> @@ -2045,7 +2056,7 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
>  
>  		/* HDMI Initialization Step E - Configure audio */
>  		hdmi_clk_regenerator_update_pixel_clock(hdmi);
> -		hdmi_enable_audio_clk(hdmi, true);
> +		dw_hdmi_audio_restore(hdmi);
>  	}
>  
>  	/* not for DVI mode */
> 



More information about the dri-devel mailing list