[PATCH RFC v2 1/5] drm/bridge: analogix-anx78xx: add support for avdd33 regulator
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Mon Oct 7 17:54:04 UTC 2019
Hi Brian,
Thank you for the patch.
On Sun, Oct 06, 2019 at 09:45:05PM -0400, Brian Masney wrote:
> Add support for the avdd33 regulator to the analogix-anx78xx driver.
> Note that the regulator is currently enabled during driver probe and
> disabled when the driver is removed. This is currently how the
> downstream MSM kernel sources do this.
>
> Let's not merge this upstream for the mean time until I get the external
> display fully working on the Nexus 5 and then I can submit proper
> support then that powers down this regulator in the power off function.
Please then also update the corresponding DT bindings to describe the
avdd33 supply.
> Signed-off-by: Brian Masney <masneyb at onstation.org>
> ---
> Changes since v1:
> - None
>
> drivers/gpu/drm/bridge/analogix-anx78xx.c | 33 +++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix-anx78xx.c
> index dec3f7e66aa0..e25fae36dbe1 100644
> --- a/drivers/gpu/drm/bridge/analogix-anx78xx.c
> +++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c
> @@ -56,6 +56,7 @@ static const u8 anx781x_i2c_addresses[] = {
>
> struct anx78xx_platform_data {
> struct regulator *dvdd10;
> + struct regulator *avdd33;
> struct gpio_desc *gpiod_hpd;
> struct gpio_desc *gpiod_pd;
> struct gpio_desc *gpiod_reset;
> @@ -715,10 +716,42 @@ static int anx78xx_start(struct anx78xx *anx78xx)
> return err;
> }
>
> +static void anx78xx_disable_regulator_action(void *_data)
> +{
> + struct anx78xx_platform_data *pdata = _data;
> +
> + regulator_disable(pdata->avdd33);
> +}
> +
> static int anx78xx_init_pdata(struct anx78xx *anx78xx)
> {
> struct anx78xx_platform_data *pdata = &anx78xx->pdata;
> struct device *dev = &anx78xx->client->dev;
> + int err;
> +
> + /* 3.3V digital core power regulator */
> + pdata->avdd33 = devm_regulator_get(dev, "avdd33");
> + if (IS_ERR(pdata->avdd33)) {
> + err = PTR_ERR(pdata->avdd33);
> + if (err != -EPROBE_DEFER)
> + DRM_ERROR("avdd33 regulator not found\n");
> +
> + return err;
> + }
> +
> + err = regulator_enable(pdata->avdd33);
> + if (err) {
> + DRM_ERROR("Failed to enable avdd33 regulator: %d\n", err);
> + return err;
> + }
> +
> + err = devm_add_action(dev, anx78xx_disable_regulator_action,
> + pdata);
> + if (err < 0) {
> + dev_err(dev, "Failed to setup regulator cleanup action %d\n",
> + err);
> + return err;
> + }
>
> /* 1.0V digital core power regulator */
> pdata->dvdd10 = devm_regulator_get(dev, "dvdd10");
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list