[linux-sunxi] [PATCH 3/3] Revert "drm/sun4i: dsi: Rework a bit the hblk calculation"
megous at megous.com
Mon Oct 7 15:19:19 UTC 2019
On Sun, Oct 06, 2019 at 11:12:43PM +0800, Icenowy Zheng wrote:
> 在 2019-10-06日的 22:44 +0800，Icenowy Zheng写道：
> > 在 2019-10-03四的 09:53 +0530，Jagan Teki写道：
> > > Hi Wens,
> > >
> > > On Tue, Oct 1, 2019 at 1:34 PM Icenowy Zheng <icenowy at aosc.io>
> > > wrote:
> > > > This reverts commit 62e7511a4f4dcf07f753893d3424decd9466c98b.
> > > >
> > > > This commit, although claimed as a refactor, in fact changed the
> > > > formula.
> > > >
> > > > By expanding the original formula, we can find that the const 10
> > > > is
> > > > not
> > > > substracted, instead it's added to the value (because 10 is
> > > > negative
> > > > when calculating hsa, and hsa itself is negative when calculating
> > > > hblk).
> > > > This breaks the similar pattern to other formulas, so restoring
> > > > the
> > > > original formula is more proper.
> > > >
> > > > Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
> > > > ---
> > > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 9 ++-------
> > > > 1 file changed, 2 insertions(+), 7 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > > > b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > > > index 2d3e822a7739..cb5fd19c0d0d 100644
> > > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > > > @@ -577,14 +577,9 @@ static void sun6i_dsi_setup_timings(struct
> > > > sun6i_dsi *dsi,
> > > > (mode->hsync_start - mode->hdisplay) *
> > > > Bpp - HFP_PACKET_OVERHEAD);
> > > >
> > > > /*
> > > > - * The blanking is set using a sync event (4
> > > > bytes)
> > > > - * and a blanking packet (4 bytes + payload + 2
> > > > - * bytes). Its minimal size is therefore 10
> > > > bytes.
> > > > + * hblk seems to be the line + porches length.
> > > > */
> > > > -#define HBLK_PACKET_OVERHEAD 10
> > > > - hblk = max((unsigned int)HBLK_PACKET_OVERHEAD,
> > > > - (mode->htotal - (mode->hsync_end -
> > > > mode-
> > > > > hsync_start)) * Bpp -
> > > > - HBLK_PACKET_OVERHEAD);
> > > > + hblk = mode->htotal * Bpp - hsa;
> > >
> > > The original formula is correct according to BSP  and work with
> > > my
> > > panels which I have tested before. May be the horizontal timings on
> > > panels you have leads to negative value.
> > Do you tested the same timing with BSP kernel?
> > It's quite difficult to get a negative value here, because the value
> > is
> > quite big (includes mode->hdisplay * Bpp).
> By re-checking with the BSP source code, I found that the constant in
> the HFP formula is indeed wrong -- it should be 16, not 6.
I'm not sure if it's relevant to the discussion, but I've recently found
a LCD configuration manual for A10, that may contain some useful info:
See this: https://github.com/pocketbook/Platform_A13/blob/master/Kernel/drivers/video/sun5i/lcd/a10_lcd_config_nanual_v1.0.pdf
> > Strangely, only change the formula here back makes the timing
> > translated from FEX file works (tested on PineTab and PinePhone
> > production ver). The translation rule is from .
> > So I still insist on the patch because it's needed by experiment.
> >  http://linux-sunxi.org/LCD
> > > 
> > > https://github.com/ayufan-pine64/linux-pine64/blob/my-hacks-1.2-with-drm/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c#L919
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com.
> To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/14da3ae768c439e387f6609553bd465e945d4a33.camel%40aosc.io.
More information about the dri-devel