[PATCH] dt-bindings: display: Convert stm32 display bindings to json-schema
Rob Herring
robh+dt at kernel.org
Tue Oct 8 12:48:58 UTC 2019
On Wed, Oct 2, 2019 at 10:17 AM Benjamin Gaignard
<benjamin.gaignard at st.com> wrote:
>
> Convert the STM32 display binding to DT schema format using json-schema.
> Split the original bindings in two yaml files:
> - one for display controller (ltdc)
> - one for DSI controller
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at st.com>
> ---
> .../devicetree/bindings/display/st,stm32-dsi.yaml | 130 +++++++++++++++++++
> .../devicetree/bindings/display/st,stm32-ltdc.txt | 144 ---------------------
> .../devicetree/bindings/display/st,stm32-ltdc.yaml | 82 ++++++++++++
> 3 files changed, 212 insertions(+), 144 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
> delete mode 100644 Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
> create mode 100644 Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
> new file mode 100644
> index 000000000000..8143cf6f0ce7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
> @@ -0,0 +1,130 @@
> +# SPDX-License-Identifier: GPL-2.0
If all the authors are ST, can you relicense to (GPL-2.0-only OR BSD-2-Clause).
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/st,stm32-dsi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectronics STM32 DSI host controller
> +
> +maintainers:
> + - Philippe Cornu <philippe.cornu at st.com>
> + - Yannick Fertre <yannick.fertre at st.com>
> +
> +properties:
> + "#address-cells": true
> + "#size-cells": true
> +
> + compatible:
> + const: st,stm32-dsi
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: Module Clock
> + - description: DSI bus clock
> + - description: Pixel clock
> + minItems: 2
> + maxItems: 3
> +
> + clock-names:
> + items:
> + - const: pclk
> + - const: ref
> + - const: px_clk
> + minItems: 2
> + maxItems: 3
> +
> + resets:
> + maxItems: 1
> +
> + reset-names:
> + items:
> + - const: apb
> +
> + phy-dsi-supply:
> + maxItems: 1
> + description:
> + Phandle of the regulator that provides the supply voltage.
> +
> + ports:
> + type: object
> + description:
> + A node containing DSI input & output port nodes with endpoint
> + definitions as documented in
> + Documentation/devicetree/bindings/media/video-interfaces.txt
> + Documentation/devicetree/bindings/graph.txt
> +
> + port:
This needs to be under 'properties' under 'ports'. And you need to
have 'port at 0' and 'port at 1' instead.
> + type: object
> + description:
> + "A port node with endpoint definitions as defined in
> + Documentation/devicetree/bindings/media/video-interfaces.txt.
> + port at 0: DSI input port node, connected to the ltdc rgb output port.
> + port at 1: DSI output port node, connected to a panel or a bridge input port"
> +
> +required:
> + - "#address-cells"
> + - "#size-cells"
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - resets
> + - ports
Add an 'additionalProperties: false' here.
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/stm32mp1-clks.h>
> + #include <dt-bindings/reset/stm32mp1-resets.h>
> + #include <dt-bindings/gpio/gpio.h>
> + dsi: dsi at 5a000000 {
> + compatible = "st,stm32-dsi";
> + reg = <0x5a000000 0x800>;
> + clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
> + clock-names = "pclk", "ref", "px_clk";
> + resets = <&rcc DSI_R>;
> + reset-names = "apb";
> + phy-dsi-supply = <®18>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + dsi_in: endpoint {
> + remote-endpoint = <<dc_ep1_out>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> + dsi_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> +
> + panel {
Not documented.
> + compatible = "orisetech,otm8009a";
> + reg = <0>;
> + reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
> + power-supply = <&v3v3>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&dsi_out>;
> + };
> + };
> + };
> + };
> +
> +...
> +
> +
[...]
> diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
> new file mode 100644
> index 000000000000..5d01c83234a3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
> @@ -0,0 +1,82 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/st,stm32-ltdc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectronics STM32 lcd-tft display controller
> +
> +maintainers:
> + - Philippe Cornu <philippe.cornu at st.com>
> + - Yannick Fertre <yannick.fertre at st.com>
> +
> +properties:
> + compatible:
> + const: st,stm32-ltdc
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + minItems: 2
> + maxItems: 2
> +
> + clocks:
> + items:
> + - description: Module Clock
Just 'maxItems: 1' is sufficient with a single entry.
> +
> + clock-names:
> + items:
> + - const: lcd
> +
> + pinctrl-names: true
> +
> + resets:
> + maxItems: 1
Inconsistent indenting.
> +
> + port:
> + type: object
> + description:
> + "Video port for DPI RGB output.
> + ltdc has one video port with up to 2 endpoints:
> + - for external dpi rgb panel or bridge, using gpios.
> + - for internal dpi input of the MIPI DSI host controller.
> + Note: These 2 endpoints cannot be activated simultaneously.
> + Please refer to the bindings defined in
> + Documentation/devicetree/bindings/media/video-interfaces.txt."
> +
> +patternProperties:
> + "^pinctrl-[0-9]+$": true
No need for this, it gets added automatically.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - resets
> + - port
Add an 'additionalProperties: false' here.
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/stm32mp1-clks.h>
> + #include <dt-bindings/reset/stm32mp1-resets.h>
> + ltdc: display-controller at 40016800 {
> + compatible = "st,stm32-ltdc";
> + reg = <0x5a001000 0x400>;
> + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&rcc LTDC_PX>;
> + clock-names = "lcd";
> + resets = <&rcc LTDC_R>;
> +
> + port {
> + ltdc_out_dsi: endpoint {
> + remote-endpoint = <&dsi_in>;
> + };
> + };
> + };
> +
> +...
> +
> --
> 2.15.0
>
More information about the dri-devel
mailing list