[PATCH 4/7] drm/meson: plane: add support for AFBC mode for OSD1 plane
Ayan Halder
Ayan.Halder at arm.com
Thu Oct 10 13:26:02 UTC 2019
On Thu, Oct 10, 2019 at 11:25:23AM +0200, Neil Armstrong wrote:
> This adds all the OSD configuration plumbing to support the AFBC decoders
> path to display of the OSD1 plane.
>
> The Amlogic GXM and G12A AFBC decoders are integrated very differently.
>
> The Amlogic GXM has a direct output path to the OSD1 VIU pixel input,
> because the GXM AFBC decoder seem to be a custom IP developed by Amlogic.
>
> On the other side, the Amlogic G12A AFBC decoder seems to be an external
> IP that emit pixels on an AXI master hooked to a "Mali Unpack" block
> feeding the OSD1 VIU pixel input.
> This uses a weird "0x1000000" internal HW physical address on both
> sides to transfer the pixels.
>
> For Amlogic GXM, the supported pixel formats are the same as the normal
> linear OSD1 mode.
>
> On the other side, Amlogic added support for all AFBC v1.2 formats for
> the G12A AFBC integration.
>
> For simplicity, we stick to the already supported formats for now.
>
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
> drivers/gpu/drm/meson/meson_crtc.c | 2 +
> drivers/gpu/drm/meson/meson_drv.h | 4 +
> drivers/gpu/drm/meson/meson_plane.c | 215 ++++++++++++++++++++++++----
> 3 files changed, 190 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/gpu/drm/meson/meson_crtc.c b/drivers/gpu/drm/meson/meson_crtc.c
> index 57ae1c13d1e6..d478fa232951 100644
> --- a/drivers/gpu/drm/meson/meson_crtc.c
> +++ b/drivers/gpu/drm/meson/meson_crtc.c
> @@ -281,6 +281,8 @@ void meson_crtc_irq(struct meson_drm *priv)
> if (priv->viu.osd1_enabled && priv->viu.osd1_commit) {
> writel_relaxed(priv->viu.osd1_ctrl_stat,
> priv->io_base + _REG(VIU_OSD1_CTRL_STAT));
> + writel_relaxed(priv->viu.osd1_ctrl_stat2,
> + priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
> writel_relaxed(priv->viu.osd1_blk0_cfg[0],
> priv->io_base + _REG(VIU_OSD1_BLK0_CFG_W0));
> writel_relaxed(priv->viu.osd1_blk0_cfg[1],
> diff --git a/drivers/gpu/drm/meson/meson_drv.h b/drivers/gpu/drm/meson/meson_drv.h
> index 60f13c6f34e5..de25349be8aa 100644
> --- a/drivers/gpu/drm/meson/meson_drv.h
> +++ b/drivers/gpu/drm/meson/meson_drv.h
> @@ -53,8 +53,12 @@ struct meson_drm {
> bool osd1_enabled;
> bool osd1_interlace;
> bool osd1_commit;
> + bool osd1_afbcd;
> uint32_t osd1_ctrl_stat;
> + uint32_t osd1_ctrl_stat2;
> uint32_t osd1_blk0_cfg[5];
> + uint32_t osd1_blk1_cfg4;
> + uint32_t osd1_blk2_cfg4;
> uint32_t osd1_addr;
> uint32_t osd1_stride;
> uint32_t osd1_height;
> diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c
> index 5e798c276037..412941aa8402 100644
> --- a/drivers/gpu/drm/meson/meson_plane.c
> +++ b/drivers/gpu/drm/meson/meson_plane.c
> @@ -23,6 +23,7 @@
> #include "meson_plane.h"
> #include "meson_registers.h"
> #include "meson_viu.h"
> +#include "meson_osd_afbcd.h"
>
> /* OSD_SCI_WH_M1 */
> #define SCI_WH_M1_W(w) FIELD_PREP(GENMASK(28, 16), w)
> @@ -92,12 +93,38 @@ static int meson_plane_atomic_check(struct drm_plane *plane,
> false, true);
> }
>
> +#define MESON_MOD_AFBC_VALID_BITS (AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 | \
> + AFBC_FORMAT_MOD_BLOCK_SIZE_32x8 | \
> + AFBC_FORMAT_MOD_YTR | \
> + AFBC_FORMAT_MOD_SPARSE | \
> + AFBC_FORMAT_MOD_SPLIT)
> +
> /* Takes a fixed 16.16 number and converts it to integer. */
> static inline int64_t fixed16_to_int(int64_t value)
> {
> return value >> 16;
> }
>
> +static u32 meson_g12a_afbcd_line_stride(struct meson_drm *priv)
> +{
> + u32 line_stride = 0;
> +
> + switch (priv->afbcd.format) {
> + case DRM_FORMAT_RGB565:
> + line_stride = ((priv->viu.osd1_width << 4) + 127) >> 7;
> + break;
> + case DRM_FORMAT_RGB888:
> + case DRM_FORMAT_XRGB8888:
> + case DRM_FORMAT_ARGB8888:
> + case DRM_FORMAT_XBGR8888:
> + case DRM_FORMAT_ABGR8888:
Please have a look at
https://www.kernel.org/doc/html/latest/gpu/afbc.html for our
recommendation. We suggest that *X* formats are avoided.
Also, for interoperability and maximum compression efficiency (with
AFBC_FORMAT_MOD_YTR), we suggest the following order :-
Component 0: R
Component 1: G
Component 2: B
Component 3: A (if available)
Thus, DRM_FORMAT_ABGR, DRM_FORMAT_BGR should only be allowed.
> + line_stride = ((priv->viu.osd1_width << 5) + 127) >> 7;
> + break;
> + }
> +
> + return ((line_stride + 1) >> 1) << 1;
> +}
> +
> static void meson_plane_atomic_update(struct drm_plane *plane,
> struct drm_plane_state *old_state)
> {
> @@ -126,57 +153,88 @@ static void meson_plane_atomic_update(struct drm_plane *plane,
> */
> spin_lock_irqsave(&priv->drm->event_lock, flags);
>
> + /* Check if AFBC decoder is required for this buffer */
> + if ((meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM) ||
> + meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) &&
> + fb->modifier & DRM_FORMAT_MOD_ARM_AFBC(MESON_MOD_AFBC_VALID_BITS))
> + priv->viu.osd1_afbcd = true;
> + else
> + priv->viu.osd1_afbcd = false;
> +
> /* Enable OSD and BLK0, set max global alpha */
> priv->viu.osd1_ctrl_stat = OSD_ENABLE |
> (0xFF << OSD_GLOBAL_ALPHA_SHIFT) |
> OSD_BLK0_ENABLE;
>
> + priv->viu.osd1_ctrl_stat2 = readl(priv->io_base +
> + _REG(VIU_OSD1_CTRL_STAT2));
> +
> canvas_id_osd1 = priv->canvas_id_osd1;
>
> /* Set up BLK0 to point to the right canvas */
> - priv->viu.osd1_blk0_cfg[0] = ((canvas_id_osd1 << OSD_CANVAS_SEL) |
> - OSD_ENDIANNESS_LE);
> + priv->viu.osd1_blk0_cfg[0] = canvas_id_osd1 << OSD_CANVAS_SEL;
> +
> + if (priv->viu.osd1_afbcd) {
> + if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) {
> + /* This is the internal decoding memory address */
> + priv->viu.osd1_blk1_cfg4 = MESON_G12A_AFBCD_OUT_ADDR;
> + priv->viu.osd1_blk0_cfg[0] |= OSD_ENDIANNESS_BE;
> + priv->viu.osd1_ctrl_stat2 |= OSD_PENDING_STAT_CLEAN;
> + }
> +
> + if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM)) {
> + priv->viu.osd1_blk0_cfg[0] |= OSD_ENDIANNESS_LE;
> + priv->viu.osd1_ctrl_stat2 |= OSD_DPATH_MALI_AFBCD;
> + }
> + } else {
> + priv->viu.osd1_blk0_cfg[0] |= OSD_ENDIANNESS_LE;
> +
> + if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM))
> + priv->viu.osd1_ctrl_stat2 &= ~OSD_DPATH_MALI_AFBCD;
> + }
>
> /* On GXBB, Use the old non-HDR RGB2YUV converter */
> if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXBB))
> priv->viu.osd1_blk0_cfg[0] |= OSD_OUTPUT_COLOR_RGB;
>
> + if (priv->viu.osd1_afbcd &&
> + meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) {
> + priv->viu.osd1_blk0_cfg[0] |= OSD_MALI_SRC_EN |
> + priv->afbcd.ops->fmt_to_blk_mode(fb->modifier,
> + fb->format->format);
> + } else {
> + switch (fb->format->format) {
> + case DRM_FORMAT_XRGB8888:
> + case DRM_FORMAT_ARGB8888:
> + priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
> + OSD_COLOR_MATRIX_32_ARGB;
> + break;
> + case DRM_FORMAT_XBGR8888:
> + case DRM_FORMAT_ABGR8888:
> + priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
> + OSD_COLOR_MATRIX_32_ABGR;
> + break;
> + case DRM_FORMAT_RGB888:
> + priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_24 |
> + OSD_COLOR_MATRIX_24_RGB;
> + break;
> + case DRM_FORMAT_RGB565:
> + priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_16 |
> + OSD_COLOR_MATRIX_16_RGB565;
> + break;
> + };
> + }
> +
> switch (fb->format->format) {
> case DRM_FORMAT_XRGB8888:
> - /* For XRGB, replace the pixel's alpha by 0xFF */
> - writel_bits_relaxed(OSD_REPLACE_EN, OSD_REPLACE_EN,
> - priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
> - priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
> - OSD_COLOR_MATRIX_32_ARGB;
> - break;
> case DRM_FORMAT_XBGR8888:
> /* For XRGB, replace the pixel's alpha by 0xFF */
> - writel_bits_relaxed(OSD_REPLACE_EN, OSD_REPLACE_EN,
> - priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
> - priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
> - OSD_COLOR_MATRIX_32_ABGR;
> + priv->viu.osd1_ctrl_stat2 |= OSD_REPLACE_EN;
> break;
> case DRM_FORMAT_ARGB8888:
> - /* For ARGB, use the pixel's alpha */
> - writel_bits_relaxed(OSD_REPLACE_EN, 0,
> - priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
> - priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
> - OSD_COLOR_MATRIX_32_ARGB;
> - break;
> case DRM_FORMAT_ABGR8888:
> /* For ARGB, use the pixel's alpha */
> - writel_bits_relaxed(OSD_REPLACE_EN, 0,
> - priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
> - priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
> - OSD_COLOR_MATRIX_32_ABGR;
> - break;
> - case DRM_FORMAT_RGB888:
> - priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_24 |
> - OSD_COLOR_MATRIX_24_RGB;
> - break;
> - case DRM_FORMAT_RGB565:
> - priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_16 |
> - OSD_COLOR_MATRIX_16_RGB565;
> + priv->viu.osd1_ctrl_stat2 &= ~OSD_REPLACE_EN;
> break;
> };
>
> @@ -307,6 +365,16 @@ static void meson_plane_atomic_update(struct drm_plane *plane,
> priv->viu.osd1_height = fb->height;
> priv->viu.osd1_width = fb->width;
>
> + if (priv->viu.osd1_afbcd) {
> + priv->afbcd.modifier = fb->modifier;
> + priv->afbcd.format = fb->format->format;
> +
> + /* Calculate decoder write stride */
> + if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A))
> + priv->viu.osd1_blk2_cfg4 =
> + meson_g12a_afbcd_line_stride(priv);
> + }
> +
> if (!meson_plane->enabled) {
> /* Reset OSD1 before enabling it on GXL+ SoCs */
> if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM) ||
> @@ -346,6 +414,42 @@ static const struct drm_plane_helper_funcs meson_plane_helper_funcs = {
> .prepare_fb = drm_gem_fb_prepare_fb,
> };
>
> +static bool meson_plane_format_mod_supported(struct drm_plane *plane,
> + u32 format, u64 modifier)
> +{
> + struct meson_plane *meson_plane = to_meson_plane(plane);
> + struct meson_drm *priv = meson_plane->priv;
> + int i;
> +
> + if (modifier == DRM_FORMAT_MOD_INVALID)
> + return false;
> +
> + if (modifier == DRM_FORMAT_MOD_LINEAR)
> + return true;
> +
> + if (!meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM) &&
> + !meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A))
> + return false;
> +
> + if (modifier & ~DRM_FORMAT_MOD_ARM_AFBC(MESON_MOD_AFBC_VALID_BITS))
> + return false;
> +
> + for (i = 0 ; i < plane->modifier_count ; ++i)
> + if (plane->modifiers[i] == modifier)
> + break;
> +
> + if (i == plane->modifier_count) {
> + DRM_DEBUG_KMS("Unsupported modifier\n");
> + return false;
> + }
> +
> + if (priv->afbcd.ops && priv->afbcd.ops->supported_fmt)
> + return priv->afbcd.ops->supported_fmt(modifier, format);
> +
> + DRM_DEBUG_KMS("AFBC Unsupported\n");
> + return false;
> +}
> +
> static const struct drm_plane_funcs meson_plane_funcs = {
> .update_plane = drm_atomic_helper_update_plane,
> .disable_plane = drm_atomic_helper_disable_plane,
> @@ -353,6 +457,7 @@ static const struct drm_plane_funcs meson_plane_funcs = {
> .reset = drm_atomic_helper_plane_reset,
> .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
> .atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
> + .format_mod_supported = meson_plane_format_mod_supported,
> };
>
> static const uint32_t supported_drm_formats[] = {
> @@ -364,10 +469,53 @@ static const uint32_t supported_drm_formats[] = {
> DRM_FORMAT_RGB565,
> };
>
> +static const uint64_t format_modifiers_afbc_gxm[] = {
> + DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
> + AFBC_FORMAT_MOD_SPARSE |
> + AFBC_FORMAT_MOD_YTR),
> + /* SPLIT mandates SPARSE, RGB modes mandates YTR */
> + DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
> + AFBC_FORMAT_MOD_YTR |
> + AFBC_FORMAT_MOD_SPARSE |
> + AFBC_FORMAT_MOD_SPLIT),
> + DRM_FORMAT_MOD_LINEAR,
> + DRM_FORMAT_MOD_INVALID,
> +};
> +
> +static const uint64_t format_modifiers_afbc_g12a[] = {
> + /*
> + * - TOFIX Support AFBC modifiers for YUV formats (16x16 + TILED)
> + * - AFBC_FORMAT_MOD_YTR is mandatory since we only support RGB
> + * - SPLIT is mandatory for performances reasons when in 16x16
> + * block size
> + * - 32x8 block size + SPLIT is mandatory with 4K frame size
> + * for performances reasons
> + */
> + DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
> + AFBC_FORMAT_MOD_YTR |
> + AFBC_FORMAT_MOD_SPARSE |
> + AFBC_FORMAT_MOD_SPLIT),
> + DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_32x8 |
> + AFBC_FORMAT_MOD_YTR |
> + AFBC_FORMAT_MOD_SPARSE),
> + DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_32x8 |
> + AFBC_FORMAT_MOD_YTR |
> + AFBC_FORMAT_MOD_SPARSE |
> + AFBC_FORMAT_MOD_SPLIT),
> + DRM_FORMAT_MOD_LINEAR,
> + DRM_FORMAT_MOD_INVALID,
> +};
> +
> +static const uint64_t format_modifiers_default[] = {
> + DRM_FORMAT_MOD_LINEAR,
> + DRM_FORMAT_MOD_INVALID,
> +};
> +
> int meson_plane_create(struct meson_drm *priv)
> {
> struct meson_plane *meson_plane;
> struct drm_plane *plane;
> + const uint64_t *format_modifiers = format_modifiers_default;
>
> meson_plane = devm_kzalloc(priv->drm->dev, sizeof(*meson_plane),
> GFP_KERNEL);
> @@ -377,11 +525,16 @@ int meson_plane_create(struct meson_drm *priv)
> meson_plane->priv = priv;
> plane = &meson_plane->base;
>
> + if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM))
> + format_modifiers = format_modifiers_afbc_gxm;
> + else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A))
> + format_modifiers = format_modifiers_afbc_g12a;
> +
> drm_universal_plane_init(priv->drm, plane, 0xFF,
> &meson_plane_funcs,
> supported_drm_formats,
> ARRAY_SIZE(supported_drm_formats),
> - NULL,
> + format_modifiers,
> DRM_PLANE_TYPE_PRIMARY, "meson_primary_plane");
>
> drm_plane_helper_add(plane, &meson_plane_helper_funcs);
> --
> 2.22.0
More information about the dri-devel
mailing list