[PATCH v7 7/8] dt-bindings: display: panel: add AUO auo, b101uan08.3 panel documentation

[Jitao Shi]

Add dcumentation for auo,b101uan08.3, which is mipi dsi video panel
and resolution is 1200x1920.

Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
---
 .../display/panel/auo,b101uan08.3.yaml        | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.yaml b/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.yaml
new file mode 100644
index 000000000000..c0939f8c7274
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/auo,b101uan08.3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AUO B101UAN08.3 DSI Display Panel
+
+maintainers:
+  - Thierry Reding <thierry.reding at gmail.com>
+  - Sam Ravnborg <sam at ravnborg.org>
+  - Rob Herring <robh+dt at kernel.org>
+
+properties:
+  compatible:
+        const: auo,b101uan08.3
+
+  reg:
+    description: the virtual channel number of a DSI peripheral
+
+  enable-gpios:
+    description: a GPIO spec for the enable pin
+
+  pp1800-supply:
+    description: core voltage supply
+
+  avdd-supply:
+    description: phandle of the regulator that provides positive voltage
+
+  avee-supply:
+    description: phandle of the regulator that provides negative voltage
+
+  backlight:
+    description: phandle of the backlight device attached to the panel
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - pp1800-supply
+ - avdd-supply
+ - avee-supply
+ - backlight
+
+additionalProperties: false
+
+examples:
+  - |
+    &dsi {
+        panel at 0 {
+            compatible = "auo,b101uan08.3";
+            reg = <0>;
+            enable-gpios = <&pio 45 0>;
+            avdd-supply = <&ppvarn_lcd>;
+            avee-supply = <&ppvarp_lcd>;
+            pp1800-supply = <&pp1800_lcd>;
+            backlight = <&backlight_lcd0>;
+            status = "okay";
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
-- 
2.21.0