[PATCH 1/3] drm/meson: add RDMA register bits defines

[Neil Armstrong]

The Amlogic VPU embeds a "Register DMA" that can write a sequence of registers
on the VPU AHB bus, either manually or triggered by an internal IRQ event like
VSYNC or a line input counter.

This adds the register defines.

Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
 drivers/gpu/drm/meson/meson_registers.h | 48 +++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h
index 547bee04b46e..8ea00546cd4e 100644
--- a/drivers/gpu/drm/meson/meson_registers.h
+++ b/drivers/gpu/drm/meson/meson_registers.h
@@ -1211,11 +1211,59 @@
 #define RDMA_AHB_START_ADDR_7 0x110e
 #define RDMA_AHB_END_ADDR_7 0x110f
 #define RDMA_ACCESS_AUTO 0x1110
+#define		RDMA_ACCESS_TRIGGER_CHAN3	GENMASK(31, 24)
+#define		RDMA_ACCESS_TRIGGER_CHAN2	GENMASK(23, 16)
+#define		RDMA_ACCESS_TRIGGER_CHAN1	GENMASK(15, 8)
+#define		RDMA_ACCESS_TRIGGER_STOP	0
+#define		RDMA_ACCESS_TRIGGER_VSYNC	1
+#define		RDMA_ACCESS_TRIGGER_LINE	32
+#define		RDMA_ACCESS_RW_FLAG_CHAN3	BIT(7)
+#define		RDMA_ACCESS_RW_FLAG_CHAN2	BIT(6)
+#define		RDMA_ACCESS_RW_FLAG_CHAN1	BIT(5)
+#define		RDMA_ACCESS_ADDR_INC_CHAN3	BIT(3)
+#define		RDMA_ACCESS_ADDR_INC_CHAN2	BIT(2)
+#define		RDMA_ACCESS_ADDR_INC_CHAN1	BIT(1)
 #define RDMA_ACCESS_AUTO2 0x1111
+#define		RDMA_ACCESS_RW_FLAG_CHAN7	BIT(7)
+#define		RDMA_ACCESS_RW_FLAG_CHAN6	BIT(6)
+#define		RDMA_ACCESS_RW_FLAG_CHAN5	BIT(5)
+#define		RDMA_ACCESS_RW_FLAG_CHAN4	BIT(4)
+#define		RDMA_ACCESS_ADDR_INC_CHAN7	BIT(3)
+#define		RDMA_ACCESS_ADDR_INC_CHAN6	BIT(2)
+#define		RDMA_ACCESS_ADDR_INC_CHAN5	BIT(1)
+#define		RDMA_ACCESS_ADDR_INC_CHAN4	BIT(0)
 #define RDMA_ACCESS_AUTO3 0x1112
+#define		RDMA_ACCESS_TRIGGER_CHAN7	GENMASK(31, 24)
+#define		RDMA_ACCESS_TRIGGER_CHAN6	GENMASK(23, 16)
+#define		RDMA_ACCESS_TRIGGER_CHAN5	GENMASK(15, 8)
+#define		RDMA_ACCESS_TRIGGER_CHAN4	GENMASK(7, 0)
 #define RDMA_ACCESS_MAN 0x1113
+#define		RDMA_ACCESS_MAN_RW_FLAG		BIT(2)
+#define		RDMA_ACCESS_MAN_ADDR_INC	BIT(1)
+#define		RDMA_ACCESS_MAN_START		BIT(0)
 #define RDMA_CTRL 0x1114
+#define		RDMA_IRQ_CLEAR_CHAN7	BIT(31)
+#define		RDMA_IRQ_CLEAR_CHAN6	BIT(30)
+#define		RDMA_IRQ_CLEAR_CHAN5	BIT(29)
+#define		RDMA_IRQ_CLEAR_CHAN4	BIT(28)
+#define		RDMA_IRQ_CLEAR_CHAN3	BIT(27)
+#define		RDMA_IRQ_CLEAR_CHAN2	BIT(26)
+#define		RDMA_IRQ_CLEAR_CHAN1	BIT(25)
+#define		RDMA_IRQ_CLEAR_CHAN_MAN	BIT(24)
+#define		RDMA_DEFAULT_CONFIG	(BIT(7) | BIT(6))
+#define		RDMA_CTRL_AHB_WR_BURST	GENMASK(5, 4)
+#define		RDMA_CTRL_AHB_RD_BURST	GENMASK(3, 2)
+#define		RDMA_CTRL_SW_RESET	BIT(1)
+#define		RDMA_CTRL_FREE_CLK_EN	BIT(0)
 #define RDMA_STATUS 0x1115
+#define		RDMA_IRQ_STAT_CHAN7	BIT(31)
+#define		RDMA_IRQ_STAT_CHAN6	BIT(30)
+#define		RDMA_IRQ_STAT_CHAN5	BIT(29)
+#define		RDMA_IRQ_STAT_CHAN4	BIT(28)
+#define		RDMA_IRQ_STAT_CHAN3	BIT(27)
+#define		RDMA_IRQ_STAT_CHAN2	BIT(26)
+#define		RDMA_IRQ_STAT_CHAN1	BIT(25)
+#define		RDMA_IRQ_STAT_CHAN_MAN	BIT(24)
 #define RDMA_STATUS2 0x1116
 #define RDMA_STATUS3 0x1117
 #define L_GAMMA_CNTL_PORT 0x1400
-- 
2.22.0