[PATCH V4 2/3] dt-bindings: Add Logic PD Type 28 display panel

[Adam Ford]

On Wed, Oct 9, 2019 at 6:31 PM Rob Herring <robh at kernel.org> wrote:
>
> On Tue, Oct 01, 2019 at 06:39:22PM -0500, Adam Ford wrote:
> > This patch adds documentation of device tree bindings for the WVGA panel
> > Logic PD Type 28 display.
> >
> > Signed-off-by: Adam Ford <aford173 at gmail.com>
> > ---
> > V4:  Update per Rob H's suggestions and copy other panel yaml example from 5.4-rc1
> > V3:  Correct build errors from 'make dt_binding_check'
>
> The example still fails to build here.

I cannot replicate the build error on 5.4-RC3 at least for this
binding on V4 of the patch.  I get build error on other bindings.

$ make dt_binding_check ARCH=arm
scripts/kconfig/conf  --syncconfig Kconfig
  SCHEMA  Documentation/devicetree/bindings/processed-schema.yaml
/home/aford/src/linux/Documentation/devicetree/bindings/net/adi,adin.yaml:
ignoring, error in schema 'adi,rx-internal-delay-ps'
warning: no schema found in file:
Documentation/devicetree/bindings/net/adi,adin.yaml
/home/aford/src/linux/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml:
ignoring, error in schema '0'
warning: no schema found in file:
Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
  CHKDT   Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
  ....
  CHKDT   Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
  CHKDT   Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.yaml
  CHKDT   Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
  CHKDT   Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
 ...
 CHKDT   Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
  CHKDT   Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml:
$id: path/filename 'arm/allwinner,sun4i-a10-csi.yaml' doesn't match
actual filename
Documentation/devicetree/bindings/Makefile:12: recipe for target
'Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.example.dts'
failed
make[1]: *** [Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.example.dts]
Error 1
Makefile:1263: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2


I took out some of the logs to make it less chatty.  I don't know
anything about yaml or what the expectations are, so if there is a
test beyond 'make dt_binding_check' please let me know.

Thank you,

adam

>
> > V2:  Use YAML instead of TXT for binding
> >
> > diff --git a/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
> > new file mode 100644
> > index 000000000000..e2c62e8f1db4
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
> > @@ -0,0 +1,42 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/panel/logicpd,type28.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Logic PD Type 28 4.3" WQVGA TFT LCD panel
> > +
> > +maintainers:
> > +  - Adam Ford <aford173 at gmail.com>
> > +
> > +allOf:
> > +  - $ref: panel-common.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    const: logicpd,type28
> > +
> > +  power-supply: true
> > +  enable-gpios: true
> > +  backlight: true
> > +  port: true
> > +
> > +required:
> > +  - compatible
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    lcd0: display {
> > +      compatible = "logicpd,type28";
> > +      enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
> > +      backlight = <&backlight>;
> > +      port {
> > +        lcd_in: endpoint {
> > +          remote-endpoint = <&dpi_out>;
> > +        };
> > +      };
> > +    };
> > +
> > +...
> > --
> > 2.17.1
> >