[PATCHv8 1/2] drm: tda998x: use cec_notifier_conn_(un)register

Russell King - ARM Linux admin linux at armlinux.org.uk
Wed Oct 16 16:14:17 UTC 2019


On Wed, Oct 16, 2019 at 03:39:15PM +0200, Hans Verkuil wrote:
> From: Dariusz Marcinkiewicz <darekm at google.com>
> 
> Use the new cec_notifier_conn_(un)register() functions to
> (un)register the notifier for the HDMI connector.
> 
> Signed-off-by: Dariusz Marcinkiewicz <darekm at google.com>
> Signed-off-by: Hans Verkuil <hverkuil-cisco at xs4all.nl>

Please explain in detail what this mutex actually achieves.

> ---
>  drivers/gpu/drm/i2c/tda998x_drv.c | 21 ++++++++++++++++-----
>  1 file changed, 16 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
> index 84c6d4c91c65..8262b44b776e 100644
> --- a/drivers/gpu/drm/i2c/tda998x_drv.c
> +++ b/drivers/gpu/drm/i2c/tda998x_drv.c
> @@ -82,6 +82,9 @@ struct tda998x_priv {
>  	u8 audio_port_enable[AUDIO_ROUTE_NUM];
>  	struct tda9950_glue cec_glue;
>  	struct gpio_desc *calib;
> +
> +	/* protect cec_notify */
> +	struct mutex cec_notify_mutex;
>  	struct cec_notifier *cec_notify;
>  };
>  
> @@ -805,8 +808,11 @@ static irqreturn_t tda998x_irq_thread(int irq, void *data)
>  				tda998x_edid_delay_start(priv);
>  			} else {
>  				schedule_work(&priv->detect_work);
> -				cec_notifier_set_phys_addr(priv->cec_notify,
> -						   CEC_PHYS_ADDR_INVALID);
> +
> +				mutex_lock(&priv->cec_notify_mutex);
> +				cec_notifier_phys_addr_invalidate(
> +						priv->cec_notify);
> +				mutex_unlock(&priv->cec_notify_mutex);
>  			}
>  
>  			handled = true;
> @@ -1790,8 +1796,10 @@ static void tda998x_destroy(struct device *dev)
>  
>  	i2c_unregister_device(priv->cec);
>  
> -	if (priv->cec_notify)
> -		cec_notifier_put(priv->cec_notify);
> +	mutex_lock(&priv->cec_notify_mutex);
> +	cec_notifier_conn_unregister(priv->cec_notify);
> +	priv->cec_notify = NULL;
> +	mutex_unlock(&priv->cec_notify_mutex);

By the time we get here:

1) The interrupt has been freed (which is a synchronous operation)
   tda998x_irq_thread() can't be called and can't be running, and
   therefore cec_notifier_phys_addr_invalidate() also can't be called
   or be running.
2) You don't touch the cec_notifier_set_phys_addr_from_edid() site;
   if there's any case that _might_ possibly conflict, it is that one.
3) tda998x_destroy() and tda998x_create() can't be called concurrently
   in any case; the driver model guarantees that ->probe and ->remove
   for the same device are serialised.

>  }
>  
>  static int tda998x_create(struct device *dev)
> @@ -1812,6 +1820,7 @@ static int tda998x_create(struct device *dev)
>  	mutex_init(&priv->mutex);	/* protect the page access */
>  	mutex_init(&priv->audio_mutex); /* protect access from audio thread */
>  	mutex_init(&priv->edid_mutex);
> +	mutex_init(&priv->cec_notify_mutex);
>  	INIT_LIST_HEAD(&priv->bridge.list);
>  	init_waitqueue_head(&priv->edid_delay_waitq);
>  	timer_setup(&priv->edid_delay_timer, tda998x_edid_delay_done, 0);
> @@ -1916,7 +1925,9 @@ static int tda998x_create(struct device *dev)
>  		cec_write(priv, REG_CEC_RXSHPDINTENA, CEC_RXSHPDLEV_HPD);
>  	}
>  
> -	priv->cec_notify = cec_notifier_get(dev);
> +	mutex_lock(&priv->cec_notify_mutex);
> +	priv->cec_notify = cec_notifier_conn_register(dev, NULL, NULL);
> +	mutex_unlock(&priv->cec_notify_mutex);

and:

4) priv->cec_notify will be NULL here until such time that
   cec_notifier_conn_register() has returned.  If the mutex is trying
   to protect something, it's very unclear what it is.
   
Trying to guess what it's protecting against:

- Is it protecting against NULL priv->cec_notify?  No, because it can
  be NULL just before we take the lock.
- Is it protecting the internals of cec_notifier_conn_register()
  against the other calls - no, because priv->cec_notify will be NULL
  until the function has finished.
- Is it protecting the write to priv->cec_notify?  Maybe, but that
  doesn't need any protection - architectures are single-copy atomic,
  which means that a pointer is either written or it is not written.
  Therefore, it will either be NULL (the state before the call is made)
  or it will be set correctly (after the call has completed.)

So, all in all, I don't see what this lock is doing, and I think it
should be removed.

If it's necessary for a future change (which may or may not be merged)
then the lock should be part of that future change, because the change
proposed by this patch certainly does not need it.

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up


More information about the dri-devel mailing list