[PATCH 2/3 v3] drm/panel: Add DT bindings for Sony ACX424AKP

[Linus Walleij]

This adds device tree bindings for the Sony ACX424AKP panel.
Let's use YAML.

Cc: devicetree at vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
ChangeLog v2->v3:
- Put the example inside a dsi-controller so we have a complete
  example that verifies to the DSI panel generic binding.
ChangeLog v1->v2:
- Suggest a stand-alone YAML bindings file for DSI panels in
  a separate patch, and use that to reference the
  boolean "enforce-video-mode" attribute for DSI panels
---
 .../display/panel/sony,acx424akp.yaml         | 49 +++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
new file mode 100644
index 000000000000..c01eea17b08f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,acx424akp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony ACX424AKP 4" 480x864 AMOLED panel
+
+maintainers:
+  - Linus Walleij <linus.walleij at linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: panel-dsi-common.yaml#
+
+properties:
+  compatible:
+    const: sony,acx424akp
+  reg: true
+  port: true
+  reset-gpios: true
+  vddi-supply:
+     description: regulator that supplies the vddi voltage
+  enforce-video-mode: true
+
+required:
+  - compatible
+  - reg
+  - port
+  - reset-gpios
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi-controller at 0 {
+        compatible = "foo";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel {
+            compatible = "sony,acx424akp";
+            reg = <0>;
+            vddi-supply = <&foo>;
+            reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+...
\ No newline at end of file
-- 
2.21.0