[PATCH 3/5] drm/dsi: add missing DSI DCS commands

[Jani Nikula]

Update from the DCS specification.

Cc: Vandita Kulkarni <vandita.kulkarni at intel.com>
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
 include/video/mipi_display.h | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/include/video/mipi_display.h b/include/video/mipi_display.h
index 6b6390dfa203..928f8c4b6658 100644
--- a/include/video/mipi_display.h
+++ b/include/video/mipi_display.h
@@ -79,7 +79,9 @@ enum {
 enum {
 	MIPI_DCS_NOP			= 0x00,
 	MIPI_DCS_SOFT_RESET		= 0x01,
+	MIPI_DCS_GET_COMPRESSION_MODE	= 0x03,
 	MIPI_DCS_GET_DISPLAY_ID		= 0x04,
+	MIPI_DCS_GET_ERROR_COUNT_ON_DSI	= 0x05,
 	MIPI_DCS_GET_RED_CHANNEL	= 0x06,
 	MIPI_DCS_GET_GREEN_CHANNEL	= 0x07,
 	MIPI_DCS_GET_BLUE_CHANNEL	= 0x08,
@@ -94,6 +96,8 @@ enum {
 	MIPI_DCS_EXIT_SLEEP_MODE	= 0x11,
 	MIPI_DCS_ENTER_PARTIAL_MODE	= 0x12,
 	MIPI_DCS_ENTER_NORMAL_MODE	= 0x13,
+	MIPI_DCS_GET_IMAGE_CHECKSUM_RGB	= 0x14,
+	MIPI_DCS_GET_IMAGE_CHECKSUM_CT	= 0x15,
 	MIPI_DCS_EXIT_INVERT_MODE	= 0x20,
 	MIPI_DCS_ENTER_INVERT_MODE	= 0x21,
 	MIPI_DCS_SET_GAMMA_CURVE	= 0x26,
@@ -105,6 +109,7 @@ enum {
 	MIPI_DCS_WRITE_LUT		= 0x2D,
 	MIPI_DCS_READ_MEMORY_START	= 0x2E,
 	MIPI_DCS_SET_PARTIAL_AREA	= 0x30,
+	MIPI_DCS_SET_PARTIAL_COLUMNS	= 0x31,
 	MIPI_DCS_SET_SCROLL_AREA	= 0x33,
 	MIPI_DCS_SET_TEAR_OFF		= 0x34,
 	MIPI_DCS_SET_TEAR_ON		= 0x35,
@@ -114,7 +119,10 @@ enum {
 	MIPI_DCS_ENTER_IDLE_MODE	= 0x39,
 	MIPI_DCS_SET_PIXEL_FORMAT	= 0x3A,
 	MIPI_DCS_WRITE_MEMORY_CONTINUE	= 0x3C,
+	MIPI_DCS_SET_3D_CONTROL		= 0x3D,
 	MIPI_DCS_READ_MEMORY_CONTINUE	= 0x3E,
+	MIPI_DCS_GET_3D_CONTROL		= 0x3F,
+	MIPI_DCS_SET_VSYNC_TIMING	= 0x40,
 	MIPI_DCS_SET_TEAR_SCANLINE	= 0x44,
 	MIPI_DCS_GET_SCANLINE		= 0x45,
 	MIPI_DCS_SET_DISPLAY_BRIGHTNESS = 0x51,		/* MIPI DCS 1.3 */
@@ -126,7 +134,9 @@ enum {
 	MIPI_DCS_SET_CABC_MIN_BRIGHTNESS = 0x5E,	/* MIPI DCS 1.3 */
 	MIPI_DCS_GET_CABC_MIN_BRIGHTNESS = 0x5F,	/* MIPI DCS 1.3 */
 	MIPI_DCS_READ_DDB_START		= 0xA1,
+	MIPI_DCS_READ_PPS_START		= 0xA2,
 	MIPI_DCS_READ_DDB_CONTINUE	= 0xA8,
+	MIPI_DCS_READ_PPS_CONTINUE	= 0xA9,
 };
 
 /* MIPI DCS pixel formats */
-- 
2.20.1