[PATCH v3 16/21] drm/bridge: lvds-encoder: Implement basic bus format negotiation
Boris Brezillon
boris.brezillon at collabora.com
Wed Oct 23 15:45:07 UTC 2019
Some LVDS encoder might support several input/output bus formats. Add
a way to describe the one used on a specific design by adding optional
'data-mapping' properties to the input/output ports.
Signed-off-by: Boris Brezillon <boris.brezillon at collabora.com>
---
Changes in v3:
* Use bus-width for the rgb24/rgb18 distinction
* Adjust code to match core changes
* Get rid of of_get_data_mapping()
* Don't implement ->atomic_check() (the core now takes care of bus
flags propagation)
Changes in v2:
* Make the bus-format negotiation logic more generic
---
drivers/gpu/drm/bridge/lvds-encoder.c | 72 +++++++++++++++++++++++++++
1 file changed, 72 insertions(+)
diff --git a/drivers/gpu/drm/bridge/lvds-encoder.c b/drivers/gpu/drm/bridge/lvds-encoder.c
index e2132a8d5106..a2a8f7f4ac97 100644
--- a/drivers/gpu/drm/bridge/lvds-encoder.c
+++ b/drivers/gpu/drm/bridge/lvds-encoder.c
@@ -6,6 +6,7 @@
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/of_graph.h>
#include <linux/platform_device.h>
@@ -16,6 +17,8 @@ struct lvds_encoder {
struct drm_bridge bridge;
struct drm_bridge *panel_bridge;
struct gpio_desc *powerdown_gpio;
+ u32 output_fmt;
+ u32 input_fmt;
};
static int lvds_encoder_attach(struct drm_bridge *bridge)
@@ -48,10 +51,40 @@ static void lvds_encoder_disable(struct drm_bridge *bridge)
gpiod_set_value_cansleep(lvds_encoder->powerdown_gpio, 1);
}
+static u32 *lvds_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ u32 output_fmt,
+ unsigned int *num_input_fmts)
+{
+ struct lvds_encoder *lvds_encoder = container_of(bridge,
+ struct lvds_encoder,
+ bridge);
+ u32 *input_fmts;
+
+ if (output_fmt == MEDIA_BUS_FMT_FIXED ||
+ output_fmt == lvds_encoder->output_fmt)
+ *num_input_fmts = 1;
+ else
+ *num_input_fmts = 0;
+
+ if (!*num_input_fmts)
+ return NULL;
+
+ input_fmts = kcalloc(*num_input_fmts, sizeof(*input_fmts), GFP_KERNEL);
+ if (!input_fmts)
+ return NULL;
+
+ input_fmts[0] = lvds_encoder->input_fmt;
+ return input_fmts;
+}
+
static struct drm_bridge_funcs funcs = {
.attach = lvds_encoder_attach,
.enable = lvds_encoder_enable,
.disable = lvds_encoder_disable,
+ .atomic_get_input_bus_fmts = lvds_atomic_get_input_bus_fmts,
};
static int lvds_encoder_probe(struct platform_device *pdev)
@@ -62,11 +95,16 @@ static int lvds_encoder_probe(struct platform_device *pdev)
struct device_node *panel_node;
struct drm_panel *panel;
struct lvds_encoder *lvds_encoder;
+ const char *output_data_mapping = NULL;
+ u32 input_bus_width = 0;
lvds_encoder = devm_kzalloc(dev, sizeof(*lvds_encoder), GFP_KERNEL);
if (!lvds_encoder)
return -ENOMEM;
+ lvds_encoder->input_fmt = MEDIA_BUS_FMT_FIXED;
+ lvds_encoder->output_fmt = MEDIA_BUS_FMT_FIXED;
+
lvds_encoder->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown",
GPIOD_OUT_HIGH);
if (IS_ERR(lvds_encoder->powerdown_gpio)) {
@@ -77,6 +115,25 @@ static int lvds_encoder_probe(struct platform_device *pdev)
return err;
}
+ port = of_graph_get_port_by_id(dev->of_node, 0);
+ if (!port) {
+ dev_dbg(dev, "port 0 not found\n");
+ return -ENXIO;
+ }
+
+ of_node_put(port);
+
+ if (of_property_read_u32(port, "bus-width", &input_bus_width)) {
+ lvds_encoder->input_fmt = MEDIA_BUS_FMT_FIXED;
+ } else if (input_bus_width == 18) {
+ lvds_encoder->input_fmt = MEDIA_BUS_FMT_RGB666_1X18;
+ } else if (input_bus_width == 24) {
+ lvds_encoder->input_fmt = MEDIA_BUS_FMT_RGB888_1X24;
+ } else {
+ dev_dbg(dev, "unsupported bus-width)\n");
+ return -ENOTSUPP;
+ }
+
/* Locate the panel DT node. */
port = of_graph_get_port_by_id(dev->of_node, 1);
if (!port) {
@@ -84,6 +141,21 @@ static int lvds_encoder_probe(struct platform_device *pdev)
return -ENXIO;
}
+ of_property_read_string(port, "data-mapping", &output_data_mapping);
+ if (!output_data_mapping) {
+ lvds_encoder->output_fmt = MEDIA_BUS_FMT_FIXED;
+ } else if (!strcmp(output_data_mapping, "jeida-18")) {
+ lvds_encoder->output_fmt = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG;
+ } else if (!strcmp(output_data_mapping, "jeida-24")) {
+ lvds_encoder->output_fmt = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA;
+ } else if (!strcmp(output_data_mapping, "vesa-24")) {
+ lvds_encoder->output_fmt = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG;
+ } else {
+ of_node_put(port);
+ dev_dbg(dev, "unsupported output data-mapping\n");
+ return -ENOTSUPP;
+ }
+
endpoint = of_get_child_by_name(port, "endpoint");
of_node_put(port);
if (!endpoint) {
--
2.21.0
More information about the dri-devel
mailing list