[PATCH] drm: bridge/dw_hdmi: add audio sample channel status setting
Cheng-yi Chiang
cychiang at chromium.org
Wed Sep 4 09:35:56 UTC 2019
On Wed, Sep 4, 2019 at 4:33 AM Jonas Karlman <jonas at kwiboo.se> wrote:
>
> On 2019-09-03 20:08, Jernej Škrabec wrote:
> > Hi!
> >
> > Dne torek, 03. september 2019 ob 20:00:33 CEST je Neil Armstrong napisal(a):
> >> Hi,
> >>
> >> Le 03/09/2019 à 11:53, Neil Armstrong a écrit :
> >>> Hi,
> >>>
> >>> On 03/09/2019 07:51, Cheng-Yi Chiang wrote:
> >>>> From: Yakir Yang <ykk at rock-chips.com>
> >>>>
> >>>> When transmitting IEC60985 linear PCM audio, we configure the
> >>>> Audio Sample Channel Status information of all the channel
> >>>> status bits in the IEC60958 frame.
> >>>> Refer to 60958-3 page 10 for frequency, original frequency, and
> >>>> wordlength setting.
> >>>>
> >>>> This fix the issue that audio does not come out on some monitors
> >>>> (e.g. LG 22CV241)
> >>>>
> >>>> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
> >>>> Signed-off-by: Cheng-Yi Chiang <cychiang at chromium.org>
> >>>> ---
> >>>>
> >>>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 59 +++++++++++++++++++++++
> >>>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.h | 20 ++++++++
> >>>> 2 files changed, 79 insertions(+)
> >>>>
> >>>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> >>>> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index
> >>>> bd65d0479683..34d46e25d610 100644
> >>>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> >>>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> >>>> @@ -582,6 +582,63 @@ static unsigned int hdmi_compute_n(unsigned int
> >>>> freq, unsigned long pixel_clk)>>
> >>>> return n;
> >>>>
> >>>> }
> >>>>
> >>>> +static void hdmi_set_schnl(struct dw_hdmi *hdmi)
> >>>> +{
> >>>> + u8 aud_schnl_samplerate;
> >>>> + u8 aud_schnl_8;
> >>>> +
> >>>> + /* These registers are on RK3288 using version 2.0a. */
> >>>> + if (hdmi->version != 0x200a)
> >>>> + return;
> >>> Are these limited to the 2.0a version *in* RK3288, or 2.0a version on all
> >>> SoCs ?
> >> After investigations, Amlogic sets these registers on their 2.0a version
> >> aswell, and Jernej (added in Cc) reported me Allwinner sets them on their
> >> < 2.0a and > 2.0a IPs versions.
> >>
> >> Can you check on the Rockchip IP versions in RK3399 ?
> >>
> >> For reference, the HDMI 1.4a IP version allwinner setups is:
> >> https://github.com/Allwinner-Homlet/H3-BSP4.4-linux/blob/master/drivers/vide
> >> o/fbdev/sunxi/disp2/hdmi/hdmi_bsp_sun8iw7.c#L531-L539 (registers a
> >> "scrambled" but a custom bit can reset to the original mapping, 0x1066 ...
> >> 0x106f)
> > For easier reading, here is similar, but annotated version: http://ix.io/1Ub6
> > Check function bsp_hdmi_audio().
> >
> > Unless there is a special reason, you can just remove that check.
>
> Agree, this check should not be needed, AUDSCHNLS7 used to be configured in my old
> multi-channel patches that have seen lot of testing on Amlogic, Allwinner and Rockchip SoCs.
>
As stated in previous mail, I will modify the check for version >=1.4
since I know that 1.3 does not have such register, at least on iMX6.
> >
> > Best regards,
> > Jernej
> >
> >> Neil
> >>
> >>>> +
> >>>> + switch (hdmi->sample_rate) {
> >>>> + case 32000:
> >>>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_32K;
> >>>> + break;
> >>>> + case 44100:
> >>>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_44K1;
> >>>> + break;
> >>>> + case 48000:
> >>>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_48K;
> >>>> + break;
> >>>> + case 88200:
> >>>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_88K2;
> >>>> + break;
> >>>> + case 96000:
> >>>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_96K;
> >>>> + break;
> >>>> + case 176400:
> >>>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_176K4;
> >>>> + break;
> >>>> + case 192000:
> >>>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_192K;
> >>>> + break;
> >>>> + case 768000:
> >>>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_768K;
> >>>> + break;
> >>>> + default:
> >>>> + dev_warn(hdmi->dev, "Unsupported audio sample rate (%u)\n",
> >>>> + hdmi->sample_rate);
> >>>> + return;
> >>>> + }
> >>>> +
> >>>> + /* set channel status register */
> >>>> + hdmi_modb(hdmi, aud_schnl_samplerate, HDMI_FC_AUDSCHNLS7_SMPRATE_MASK,
> >>>> + HDMI_FC_AUDSCHNLS7);
> >>>> +
> >>>> + /*
> >>>> + * Set original frequency to be the same as frequency.
> >>>> + * Use one-complement value as stated in IEC60958-3 page 13.
> >>>> + */
> >>>> + aud_schnl_8 = (~aud_schnl_samplerate) <<
> >>>> + HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_OFFSET;
> >>>> +
> >>>> + /* This means word length is 16 bit. Refer to IEC60958-3 page 12. */
> >>>> + aud_schnl_8 |= 2 << HDMI_FC_AUDSCHNLS8_WORDLEGNTH_OFFSET;
>
> This looks wrong, user can use 16 and 24 bit wide audio streams.
>
Thanks for spotting this issue.
I will fix it in v2 (following how http://ix.io/1Ub6 set it for 16 and 24 bit)
> >>>> +
> >>>> + hdmi_writeb(hdmi, aud_schnl_8, HDMI_FC_AUDSCHNLS8);
> >>>> +}
> >>>> +
> >>>>
> >>>> static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
> >>>>
> >>>> unsigned long pixel_clk, unsigned int sample_rate)
> >>>>
> >>>> {
> >>>>
> >>>> @@ -620,6 +677,8 @@ static void hdmi_set_clk_regenerator(struct dw_hdmi
> >>>> *hdmi,>>
> >>>> hdmi->audio_cts = cts;
> >>>> hdmi_set_cts_n(hdmi, cts, hdmi->audio_enable ? n : 0);
> >>>> spin_unlock_irq(&hdmi->audio_lock);
> >>>>
> >>>> +
> >>>> + hdmi_set_schnl(hdmi);
>
> I will suggest this function is called from or merged with dw_hdmi_set_sample_rate().
> Similar to how AUDSCONF and AUDICONF0 is configured from dw_hdmi_set_channel_count().
>
I see. I think it will make sense to add a function
set_channel_status() for dw-hdmi-i2s-audio.c to call,
since this function is more than just setting rate.
Will fix in v2.
Thanks!
> Regards,
> Jonas
>
> >>>>
> >>>> }
> >>>>
> >>>> static void hdmi_init_clk_regenerator(struct dw_hdmi *hdmi)
> >>>>
> >>>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> >>>> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h index
> >>>> 6988f12d89d9..619ebc1c8354 100644
> >>>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> >>>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> >>>> @@ -158,6 +158,17 @@
> >>>>
> >>>> #define HDMI_FC_SPDDEVICEINF 0x1062
> >>>> #define HDMI_FC_AUDSCONF 0x1063
> >>>> #define HDMI_FC_AUDSSTAT 0x1064
> >>>>
> >>>> +#define HDMI_FC_AUDSV 0x1065
> >>>> +#define HDMI_FC_AUDSU 0x1066
> >>>> +#define HDMI_FC_AUDSCHNLS0 0x1067
> >>>> +#define HDMI_FC_AUDSCHNLS1 0x1068
> >>>> +#define HDMI_FC_AUDSCHNLS2 0x1069
> >>>> +#define HDMI_FC_AUDSCHNLS3 0x106a
> >>>> +#define HDMI_FC_AUDSCHNLS4 0x106b
> >>>> +#define HDMI_FC_AUDSCHNLS5 0x106c
> >>>> +#define HDMI_FC_AUDSCHNLS6 0x106d
> >>>> +#define HDMI_FC_AUDSCHNLS7 0x106e
> >>>> +#define HDMI_FC_AUDSCHNLS8 0x106f
> >>>>
> >>>> #define HDMI_FC_DATACH0FILL 0x1070
> >>>> #define HDMI_FC_DATACH1FILL 0x1071
> >>>> #define HDMI_FC_DATACH2FILL 0x1072
> >>>>
> >>>> @@ -706,6 +717,15 @@ enum {
> >>>>
> >>>> /* HDMI_FC_AUDSCHNLS7 field values */
> >>>>
> >>>> HDMI_FC_AUDSCHNLS7_ACCURACY_OFFSET = 4,
> >>>> HDMI_FC_AUDSCHNLS7_ACCURACY_MASK = 0x30,
> >>>>
> >>>> + HDMI_FC_AUDSCHNLS7_SMPRATE_MASK = 0x0f,
> >>>> + HDMI_FC_AUDSCHNLS7_SMPRATE_192K = 0xe,
> >>>> + HDMI_FC_AUDSCHNLS7_SMPRATE_176K4 = 0xc,
> >>>> + HDMI_FC_AUDSCHNLS7_SMPRATE_96K = 0xa,
> >>>> + HDMI_FC_AUDSCHNLS7_SMPRATE_768K = 0x9,
> >>>> + HDMI_FC_AUDSCHNLS7_SMPRATE_88K2 = 0x8,
> >>>> + HDMI_FC_AUDSCHNLS7_SMPRATE_32K = 0x3,
> >>>> + HDMI_FC_AUDSCHNLS7_SMPRATE_48K = 0x2,
> >>>> + HDMI_FC_AUDSCHNLS7_SMPRATE_44K1 = 0x0,
> >>>>
> >>>> /* HDMI_FC_AUDSCHNLS8 field values */
> >>>>
> >>>> HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_MASK = 0xf0,
More information about the dri-devel
mailing list