[PATCH 5/7] drm/omap: Enable COLOR_ENCODING and COLOR_RANGE properties for planes
Jyri Sarha
jsarha at ti.com
Thu Sep 5 09:24:37 UTC 2019
On 03/09/2019 18:32, Laurent Pinchart wrote:
> Hi Tomi,
>
> Thank you for the patch.
>
> On Mon, Sep 02, 2019 at 03:53:57PM +0300, Tomi Valkeinen wrote:
>> From: Jyri Sarha <jsarha at ti.com>
>>
>> Adds support for COLOR_ENCODING and COLOR_RANGE properties to
>> omap_plane.c and dispc.c. The supported encodings and ranges are:
>>
>> For COLOR_ENCODING:
>> - YCbCt BT.601 (default)
>
> Did you mean YCbCr ?
> >> - YCbCt BT.709
>>
>> For COLOR_RANGE:
>> - YCbCt limited range
>> - YCbCt full range (default)
>>
>> Signed-off-by: Jyri Sarha <jsarha at ti.com>
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
>> ---
>> drivers/gpu/drm/omapdrm/dss/dispc.c | 119 ++++++++++++++++++++------
>> drivers/gpu/drm/omapdrm/dss/omapdss.h | 4 +
>> drivers/gpu/drm/omapdrm/omap_plane.c | 30 +++++++
>> 3 files changed, 127 insertions(+), 26 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c b/drivers/gpu/drm/omapdrm/dss/dispc.c
>> index 7d87d60edb80..40ddb28ee7aa 100644
>> --- a/drivers/gpu/drm/omapdrm/dss/dispc.c
>> +++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
>> @@ -892,32 +892,91 @@ static void dispc_wb_write_color_conv_coef(struct dispc_device *dispc,
>> #undef CVAL
>> }
>>
>> -static void dispc_setup_color_conv_coef(struct dispc_device *dispc)
>> +/* YUV -> RGB, ITU-R BT.601, full range */
>> +const static struct csc_coef_yuv2rgb coefs_yuv2rgb_bt601_full = {
>
> static const is usually preferred over const static, here and below.
>
>> + 256, 0, 358, /* ry, rcb, rcr |1.000 0.000 1.402|*/
>> + 256, -88, -182, /* gy, gcb, gcr |1.000 -0.344 -0.714|*/
>> + 256, 452, 0, /* by, bcb, bcr |1.000 1.772 0.000|*/
>> + true, /* full range */
>> +};
>> +
>> +/* YUV -> RGB, ITU-R BT.601, limited range */
>> +const static struct csc_coef_yuv2rgb coefs_yuv2rgb_bt601_lim = {
>> + 298, 0, 409, /* ry, rcb, rcr |1.164 0.000 1.596|*/
>> + 298, -100, -208, /* gy, gcb, gcr |1.164 -0.392 -0.813|*/
>> + 298, 516, 0, /* by, bcb, bcr |1.164 2.017 0.000|*/
>> + false, /* limited range */
>> +};
>> +
>> +/* YUV -> RGB, ITU-R BT.709, full range */
>> +const static struct csc_coef_yuv2rgb coefs_yuv2rgb_bt709_full = {
>> + 256, 0, 402, /* ry, rcb, rcr |1.000 0.000 1.570|*/
>> + 256, -48, -120, /* gy, gcb, gcr |1.000 -0.187 -0.467|*/
>> + 256, 475, 0, /* by, bcb, bcr |1.000 1.856 0.000|*/
>> + true, /* full range */
>> +};
>> +
>> +/* YUV -> RGB, ITU-R BT.709, limited range */
>> +const static struct csc_coef_yuv2rgb coefs_yuv2rgb_bt709_lim = {
>> + 298, 0, 459, /* ry, rcb, rcr |1.164 0.000 1.793|*/
>> + 298, -55, -136, /* gy, gcb, gcr |1.164 -0.213 -0.533|*/
>> + 298, 541, 0, /* by, bcb, bcr |1.164 2.112 0.000|*/
>> + false, /* limited range */
>> +};
>> +
>> +/* RGB -> YUV, ITU-R BT.601, limited range */
>> +const static struct csc_coef_rgb2yuv coefs_rgb2yuv_bt601_lim = {
>> + 66, 129, 25, /* yr, yg, yb | 0.257 0.504 0.098|*/
>> + -38, -74, 112, /* cbr, cbg, cbb |-0.148 -0.291 0.439|*/
>> + 112, -94, -18, /* crr, crg, crb | 0.439 -0.368 -0.071|*/
>> + false, /* limited range */
>> +};
>> +
>> +/* RGB -> YUV, ITU-R BT.601, full range */
>> +const static struct csc_coef_rgb2yuv coefs_rgb2yuv_bt601_full = {
>> + 77, 150, 29, /* yr, yg, yb | 0.299 0.587 0.114|*/
>> + -43, -85, 128, /* cbr, cbg, cbb |-0.173 -0.339 0.511|*/
>> + 128, -107, -21, /* crr, crg, crb | 0.511 -0.428 -0.083|*/
>> + true, /* full range */
>> +};
>> +
>> +/* RGB -> YUV, ITU-R BT.709, limited range */
>> +const static struct csc_coef_rgb2yuv coefs_rgb2yuv_bt701_lim = {
>
> That should be coefs_rgb2yuv_bt709_lim
>
>> + 47, 157, 16, /* yr, yg, yb | 0.1826 0.6142 0.0620|*/
>> + -26, -87, 112, /* cbr, cbg, cbb |-0.1006 -0.3386 0.4392|*/
>> + 112, -102, -10, /* crr, crg, crb | 0.4392 -0.3989 -0.0403|*/
>> + false, /* limited range */
>> +};
>
> Why is coefs_rgb2yuv_bt709_full not supported ? Actually
> coefs_rgb2yuv_bt601_lim and coefs_rgb2yuv_bt701_lim seem unused.
>
I must have simply forgotten. This is an old patch and I can not
remember exactly. But I remember that I wanted to add all CSCs at one
time so that I do not need start from the beginning when ever a new
conversion is asked. For the moment rgb to yuv conversions are only used
for write back and it currently only uses the default BT.601 Full range.
I'll add rgb2yuv_bt709_full. Or should I remove all the unused CSCs? Or
maybe put them behind some ifdef so that they do not bloat the kernel?
>> +
>> +static int dispc_ovl_set_csc(struct dispc_device *dispc,
>> + enum omap_plane_id plane,
>> + enum drm_color_encoding color_encoding,
>> + enum drm_color_range color_range)
>> {
>> - int i;
>> - int num_ovl = dispc_get_num_ovls(dispc);
>> -
>> - /* YUV -> RGB, ITU-R BT.601, limited range */
>> - const struct csc_coef_yuv2rgb coefs_yuv2rgb_bt601_lim = {
>> - 298, 0, 409, /* ry, rcb, rcr */
>> - 298, -100, -208, /* gy, gcb, gcr */
>> - 298, 516, 0, /* by, bcb, bcr */
>> - false, /* limited range */
>> - };
>> + const struct csc_coef_yuv2rgb *csc;
>>
>> - /* RGB -> YUV, ITU-R BT.601, limited range */
>> - const struct csc_coef_rgb2yuv coefs_rgb2yuv_bt601_lim = {
>> - 66, 129, 25, /* yr, yg, yb */
>> - -38, -74, 112, /* cbr, cbg, cbb */
>> - 112, -94, -18, /* crr, crg, crb */
>> - false, /* limited range */
>> - };
>> + switch (color_encoding) {
>> + case DRM_COLOR_YCBCR_BT601:
>> + if (color_range == DRM_COLOR_YCBCR_FULL_RANGE)
>> + csc = &coefs_yuv2rgb_bt601_full;
>> + else
>> + csc = &coefs_yuv2rgb_bt601_lim;
>> + break;
>> + case DRM_COLOR_YCBCR_BT709:
>> + if (color_range == DRM_COLOR_YCBCR_FULL_RANGE)
>> + csc = &coefs_yuv2rgb_bt709_full;
>> + else
>> + csc = &coefs_yuv2rgb_bt709_lim;
>> + break;
>> + default:
>> + DSSERR("Unsupported CSC mode %d for plane %d\n",
>> + color_encoding, plane);
>> + return -EINVAL;
>> + }
>>
>> - for (i = 1; i < num_ovl; i++)
>> - dispc_ovl_write_color_conv_coef(dispc, i, &coefs_yuv2rgb_bt601_lim);
>> + dispc_ovl_write_color_conv_coef(dispc, plane, csc);
>>
>> - if (dispc->feat->has_writeback)
>> - dispc_wb_write_color_conv_coef(dispc, &coefs_rgb2yuv_bt601_lim);
>> + return 0;
>> }
>>
>> static void dispc_ovl_set_ba0(struct dispc_device *dispc,
>> @@ -2598,7 +2657,9 @@ static int dispc_ovl_setup_common(struct dispc_device *dispc,
>> u8 pre_mult_alpha, u8 global_alpha,
>> enum omap_dss_rotation_type rotation_type,
>> bool replication, const struct videomode *vm,
>> - bool mem_to_mem)
>> + bool mem_to_mem,
>> + enum drm_color_encoding color_encoding,
>> + enum drm_color_range color_range)
>> {
>> bool five_taps = true;
>> bool fieldmode = false;
>> @@ -2747,6 +2808,9 @@ static int dispc_ovl_setup_common(struct dispc_device *dispc,
>> fieldmode, fourcc, rotation);
>> dispc_ovl_set_output_size(dispc, plane, out_width, out_height);
>> dispc_ovl_set_vid_color_conv(dispc, plane, cconv);
>> +
>> + if (plane != OMAP_DSS_WB)
>> + dispc_ovl_set_csc(dispc, plane, color_encoding, color_range);
>> }
>>
>> dispc_ovl_set_rotation_attrs(dispc, plane, rotation, rotation_type,
>> @@ -2783,7 +2847,8 @@ static int dispc_ovl_setup(struct dispc_device *dispc,
>> oi->screen_width, oi->pos_x, oi->pos_y, oi->width, oi->height,
>> oi->out_width, oi->out_height, oi->fourcc, oi->rotation,
>> oi->zorder, oi->pre_mult_alpha, oi->global_alpha,
>> - oi->rotation_type, replication, vm, mem_to_mem);
>> + oi->rotation_type, replication, vm, mem_to_mem,
>> + oi->color_encoding, oi->color_range);
>>
>> return r;
>> }
>> @@ -2816,7 +2881,8 @@ static int dispc_wb_setup(struct dispc_device *dispc,
>> wi->buf_width, pos_x, pos_y, in_width, in_height, wi->width,
>> wi->height, wi->fourcc, wi->rotation, zorder,
>> wi->pre_mult_alpha, global_alpha, wi->rotation_type,
>> - replication, vm, mem_to_mem);
>> + replication, vm, mem_to_mem, DRM_COLOR_YCBCR_BT601,
>> + DRM_COLOR_YCBCR_LIMITED_RANGE);
>> if (r)
>> return r;
>>
>> @@ -3948,7 +4014,8 @@ static void _omap_dispc_initial_config(struct dispc_device *dispc)
>> dispc->feat->has_gamma_table)
>> REG_FLD_MOD(dispc, DISPC_CONFIG, 1, 9, 9);
>>
>> - dispc_setup_color_conv_coef(dispc);
>> + if (dispc->feat->has_writeback)
>> + dispc_wb_write_color_conv_coef(dispc, &coefs_rgb2yuv_bt601_full);
>>
>> dispc_set_loadmode(dispc, OMAP_DSS_LOAD_FRAME_ONLY);
>>
>> diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
>> index 79f6b195c7cf..1430cab6b877 100644
>> --- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
>> +++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
>> @@ -14,6 +14,7 @@
>> #include <linux/platform_data/omapdss.h>
>> #include <uapi/drm/drm_mode.h>
>> #include <drm/drm_crtc.h>
>> +#include <drm/drm_color_mgmt.h>
>
> Alphabetical order ? While at is you coulde remove uapi/
>
>>
>> #define DISPC_IRQ_FRAMEDONE (1 << 0)
>> #define DISPC_IRQ_VSYNC (1 << 1)
>> @@ -243,6 +244,9 @@ struct omap_overlay_info {
>> u8 global_alpha;
>> u8 pre_mult_alpha;
>> u8 zorder;
>> +
>> + enum drm_color_encoding color_encoding;
>> + enum drm_color_range color_range;
>> };
>>
>> struct omap_overlay_manager_info {
>> diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
>> index 73ec99819a3d..db8e917260df 100644
>> --- a/drivers/gpu/drm/omapdrm/omap_plane.c
>> +++ b/drivers/gpu/drm/omapdrm/omap_plane.c
>> @@ -59,6 +59,8 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
>> info.pre_mult_alpha = 1;
>> else
>> info.pre_mult_alpha = 0;
>> + info.color_encoding = state->color_encoding;
>> + info.color_range = state->color_range;
>>
>> /* update scanout: */
>> omap_framebuffer_update_scanout(state->fb, state, &info);
>> @@ -189,6 +191,8 @@ static void omap_plane_reset(struct drm_plane *plane)
>> */
>> plane->state->zpos = plane->type == DRM_PLANE_TYPE_PRIMARY
>> ? 0 : omap_plane->id;
>> + plane->state->color_encoding = DRM_COLOR_YCBCR_BT601;
>> + plane->state->color_range = DRM_COLOR_YCBCR_FULL_RANGE;
>> }
>>
>> static int omap_plane_atomic_set_property(struct drm_plane *plane,
>> @@ -232,6 +236,23 @@ static const struct drm_plane_funcs omap_plane_funcs = {
>> .atomic_get_property = omap_plane_atomic_get_property,
>> };
>>
>> +static bool omap_plane_supports_yuv(struct drm_plane *plane)
>> +{
>> + struct omap_drm_private *priv = plane->dev->dev_private;
>> + struct omap_plane *omap_plane = to_omap_plane(plane);
>> + const u32 *formats =
>> + priv->dispc_ops->ovl_get_color_modes(priv->dispc, omap_plane->id);
>> + int i;
>
> unsigned int i ?
>
>> +
>> + for (i = 0; formats[i]; i++)
>> + if (formats[i] == DRM_FORMAT_YUYV ||
>> + formats[i] == DRM_FORMAT_UYVY ||
>> + formats[i] == DRM_FORMAT_NV12)
>> + return true;
>> +
>> + return false;
>> +}
>> +
>> static const char *plane_id_to_name[] = {
>> [OMAP_DSS_GFX] = "gfx",
>> [OMAP_DSS_VIDEO1] = "vid1",
>> @@ -293,6 +314,15 @@ struct drm_plane *omap_plane_init(struct drm_device *dev,
>> drm_plane_create_blend_mode_property(plane, BIT(DRM_MODE_BLEND_PREMULTI) |
>> BIT(DRM_MODE_BLEND_COVERAGE));
>>
>> + if (omap_plane_supports_yuv(plane))
>> + drm_plane_create_color_properties(plane,
>> + BIT(DRM_COLOR_YCBCR_BT601) |
>> + BIT(DRM_COLOR_YCBCR_BT709),
>> + BIT(DRM_COLOR_YCBCR_FULL_RANGE) |
>> + BIT(DRM_COLOR_YCBCR_LIMITED_RANGE),
>> + DRM_COLOR_YCBCR_BT601,
>> + DRM_COLOR_YCBCR_FULL_RANGE);
>> +
>> return plane;
>>
>> error:
>
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
More information about the dri-devel
mailing list