[PATCH] Revert "ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware."

[Eric Anholt]

Stefan Wahren <wahrenst at gmx.net> writes:

> Since release of the new BCM2835 PM driver there has been several reports
> of V3D probing issues. This is caused by timeouts during powering-up the
> GRAFX PM domain:
>
>   bcm2835-power: Timeout waiting for grafx power OK
>
> I was able to reproduce this reliable on my Raspberry Pi 3B+ after setting
> force_turbo=1 in the firmware configuration. Since there are no issues
> using the firmware PM driver with the same setup, there must be an issue
> in the BCM2835 PM driver.
>
> Unfortunately there hasn't been much progress in identifying the root cause
> since June (mostly in the lack of documentation), so i decided to switch
> back until the issue in the BCM2835 PM driver is fixed.
>
> Link: https://github.com/raspberrypi/linux/issues/3046
> Fixes: e1dc2b2e1bef (" ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware.")
> Cc: stable at vger.kernel.org
> Signed-off-by: Stefan Wahren <wahrenst at gmx.net>

Acked-by: Eric Anholt <eric at anholt.net>

I wish someone with firmware source had the time to look into why using
open source drivers to drive this hardware was failing, but I don't have
that time or code any more.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20190911/f1f826de/attachment-0001.sig>