[PATCH v4 1/2] dt-bindings: backlight: lm3630a: add enable_gpios

[Dan Murphy]

Andreas

On 9/12/19 4:32 PM, Andreas Kemnade wrote:
> add enable-gpios to describe HWEN pin
>
> Signed-off-by: Andreas Kemnade <andreas at kemnade.info>
> Acked-by: Daniel Thompson <daniel.thompson at linaro.org>

Reviewed-by: Dan Murphy <dmurphy at ti.com>


> ---
> changes in v2: added example
> changes in v3: added Acked-by
> changes in v4: moved enable-gpios to the right position
>    in the example
>   .../bindings/leds/backlight/lm3630a-backlight.yaml           | 5 +++++
>   1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> index dc129d9a329e..c8470628fe02 100644
> --- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> +++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> @@ -29,6 +29,10 @@ properties:
>     '#size-cells':
>       const: 0
>   
> +  enable-gpios:
> +    description: GPIO to use to enable/disable the backlight (HWEN pin).
> +    maxItems: 1
> +
>   required:
>     - compatible
>     - reg
> @@ -96,6 +100,7 @@ examples:
>           led-controller at 38 {
>                   compatible = "ti,lm3630a";
>                   reg = <0x38>;
> +                enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
>   
>                   #address-cells = <1>;
>                   #size-cells = <0>;