[PATCH 05/11] drm/bridge: analogix-anx78xx: correct value of TX_P0

[Andrzej Hajda]

On 15.08.2019 02:48, Brian Masney wrote:
> When attempting to configure this driver on a Nexus 5 phone (msm8974),
> setting up the dummy i2c bus for TX_P0 would fail due to an -EBUSY
> error. The downstream MSM kernel sources [1] shows that the proper value
> for TX_P0 is 0x78, not 0x70, so correct the value to allow device
> probing to succeed.
>
> [1] https://github.com/AICP/kernel_lge_hammerhead/blob/n7.1/drivers/video/slimport/slimport_tx_reg.h
>
> Signed-off-by: Brian Masney <masneyb at onstation.org>
> ---
>  drivers/gpu/drm/bridge/analogix-anx78xx.h | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.h b/drivers/gpu/drm/bridge/analogix-anx78xx.h
> index 25e063bcecbc..bc511fc605c9 100644
> --- a/drivers/gpu/drm/bridge/analogix-anx78xx.h
> +++ b/drivers/gpu/drm/bridge/analogix-anx78xx.h
> @@ -6,7 +6,7 @@
>  #ifndef __ANX78xx_H
>  #define __ANX78xx_H
>  
> -#define TX_P0				0x70
> +#define TX_P0				0x78


This bothers me little. There are no upstream users, grepping android
sources suggests that both values can be used [1][2]  (grep for "#define
TX_P0"), moreover there is code suggesting both values can be valid [3].

Could you verify datasheet which i2c slave addresses are valid for this
chip, if both I guess this patch should be reworked.


[1]:
https://android.googlesource.com/kernel/msm/+/android-msm-flo-3.4-jb-mr2/drivers/misc/slimport_anx7808/slimport_tx_reg.h

[2]:
https://github.com/AndroidGX/SimpleGX-MM-6.0_H815_20d/blob/master/drivers/video/slimport/anx7812/slimport7812_tx_reg.h

[3]:
https://github.com/commaai/android_kernel_leeco_msm8996/blob/master/drivers/video/msm/mdss/dp/slimport_custom_declare.h#L73


Regards

Andrzej


>  #define TX_P1				0x7a
>  #define TX_P2				0x72
>