[PATCH v5 2/2] drm/bridge: Add NWL MIPI DSI host controller support
Andrzej Hajda
a.hajda at samsung.com
Fri Sep 20 06:23:54 UTC 2019
On 19.09.2019 19:43, Guido Günther wrote:
> Hi Andrzej,
>
> thanks for your comments!
>
> On Thu, Sep 19, 2019 at 03:56:45PM +0200, Andrzej Hajda wrote:
>> On 14.09.2019 18:11, Guido Günther wrote:
>>> Hi Andrzej,
>>> thanks for having a look!
>>>
>>> On Fri, Sep 13, 2019 at 11:31:43AM +0200, Andrzej Hajda wrote:
>>>> On 09.09.2019 04:25, Guido Günther wrote:
>>>>> This adds initial support for the NWL MIPI DSI Host controller found on
>>>>> i.MX8 SoCs.
>>>>>
>>>>> It adds support for the i.MX8MQ but the same IP can be found on
>>>>> e.g. the i.MX8QXP.
>>>>>
>>>>> It has been tested on the Librem 5 devkit using mxsfb.
>>>>>
>>>>> Signed-off-by: Guido Günther <agx at sigxcpu.org>
>>>>> Co-developed-by: Robert Chiras <robert.chiras at nxp.com>
>>>>> Signed-off-by: Robert Chiras <robert.chiras at nxp.com>
>>>>> Tested-by: Robert Chiras <robert.chiras at nxp.com>
>>>>> ---
>>>>> drivers/gpu/drm/bridge/Kconfig | 2 +
>>>>> drivers/gpu/drm/bridge/Makefile | 1 +
>>>>> drivers/gpu/drm/bridge/nwl-dsi/Kconfig | 16 +
>>>>> drivers/gpu/drm/bridge/nwl-dsi/Makefile | 4 +
>>>>> drivers/gpu/drm/bridge/nwl-dsi/nwl-drv.c | 499 ++++++++++++++++
>>>>> drivers/gpu/drm/bridge/nwl-dsi/nwl-drv.h | 65 +++
>>>>> drivers/gpu/drm/bridge/nwl-dsi/nwl-dsi.c | 696 +++++++++++++++++++++++
>>>>> drivers/gpu/drm/bridge/nwl-dsi/nwl-dsi.h | 112 ++++
>>>> Why do you need separate files nwl-drv.[ch] and nwl-dsi.[ch] ? I guess
>>>> you can merge all into one file, maybe with separate file for NWL
>>>> register definitions.
>>> Idea is to have driver setup, soc specific hooks and revision specific
>>> quirks in one file and the dsi specific parts in another. If that
>>> doesn't fly I can merge into one if that's a requirement.
>>
>> One file looks saner to me :), but more importantly it follows current
>> practice.
> O.k., I'll merge things for v6 then.
>
>>
>>>>> 8 files changed, 1395 insertions(+)
>>>>> create mode 100644 drivers/gpu/drm/bridge/nwl-dsi/Kconfig
>>>>> create mode 100644 drivers/gpu/drm/bridge/nwl-dsi/Makefile
>>>>> create mode 100644 drivers/gpu/drm/bridge/nwl-dsi/nwl-drv.c
>>>>> create mode 100644 drivers/gpu/drm/bridge/nwl-dsi/nwl-drv.h
>>>>> create mode 100644 drivers/gpu/drm/bridge/nwl-dsi/nwl-dsi.c
>>>>> create mode 100644 drivers/gpu/drm/bridge/nwl-dsi/nwl-dsi.h
>>>>>
>>>>> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
>>>>> index 1cc9f502c1f2..7980b5c2156f 100644
>>>>> --- a/drivers/gpu/drm/bridge/Kconfig
>>>>> +++ b/drivers/gpu/drm/bridge/Kconfig
>>>>> @@ -154,6 +154,8 @@ source "drivers/gpu/drm/bridge/analogix/Kconfig"
>>>>>
>>>>> source "drivers/gpu/drm/bridge/adv7511/Kconfig"
>>>>>
>>>>> +source "drivers/gpu/drm/bridge/nwl-dsi/Kconfig"
>>>>> +
>>>>> source "drivers/gpu/drm/bridge/synopsys/Kconfig"
>>>>>
>>>>> endmenu
>>>>> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
>>>>> index 4934fcf5a6f8..d9f6c0f77592 100644
>>>>> --- a/drivers/gpu/drm/bridge/Makefile
>>>>> +++ b/drivers/gpu/drm/bridge/Makefile
>>>>> @@ -16,4 +16,5 @@ obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
>>>>> obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
>>>>> obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o
>>>>> obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o
>>>>> +obj-$(CONFIG_DRM_NWL_MIPI_DSI) += nwl-dsi/
>>>>> obj-y += synopsys/
>>>>> diff --git a/drivers/gpu/drm/bridge/nwl-dsi/Kconfig b/drivers/gpu/drm/bridge/nwl-dsi/Kconfig
>>>>> new file mode 100644
>>>>> index 000000000000..7fa678e3b5e2
>>>>> --- /dev/null
>>>>> +++ b/drivers/gpu/drm/bridge/nwl-dsi/Kconfig
>>>>> @@ -0,0 +1,16 @@
>>>>> +config DRM_NWL_MIPI_DSI
>>>>> + tristate "Northwest Logic MIPI DSI Host controller"
>>>>> + depends on DRM
>>>>> + depends on COMMON_CLK
>>>>> + depends on OF && HAS_IOMEM
>>>>> + select DRM_KMS_HELPER
>>>>> + select DRM_MIPI_DSI
>>>>> + select DRM_PANEL_BRIDGE
>>>>> + select GENERIC_PHY_MIPI_DPHY
>>>>> + select MFD_SYSCON
>>>>> + select MULTIPLEXER
>>>>> + select REGMAP_MMIO
>>>>> + help
>>>>> + This enables the Northwest Logic MIPI DSI Host controller as
>>>>> + for example found on NXP's i.MX8 Processors.
>>>>> +
>>>>> diff --git a/drivers/gpu/drm/bridge/nwl-dsi/Makefile b/drivers/gpu/drm/bridge/nwl-dsi/Makefile
>>>>> new file mode 100644
>>>>> index 000000000000..804baf2f1916
>>>>> --- /dev/null
>>>>> +++ b/drivers/gpu/drm/bridge/nwl-dsi/Makefile
>>>>> @@ -0,0 +1,4 @@
>>>>> +# SPDX-License-Identifier: GPL-2.0
>>>>> +nwl-mipi-dsi-y := nwl-drv.o nwl-dsi.o
>>>>> +obj-$(CONFIG_DRM_NWL_MIPI_DSI) += nwl-mipi-dsi.o
>>>>> +header-test-y += nwl-drv.h nwl-dsi.h
>>>>> diff --git a/drivers/gpu/drm/bridge/nwl-dsi/nwl-drv.c b/drivers/gpu/drm/bridge/nwl-dsi/nwl-drv.c
>>>>> new file mode 100644
>>>>> index 000000000000..9ff43d2de127
>>>>> --- /dev/null
>>>>> +++ b/drivers/gpu/drm/bridge/nwl-dsi/nwl-drv.c
>>>>> @@ -0,0 +1,499 @@
>>>>> +// SPDX-License-Identifier: GPL-2.0+
>>>>> +/*
>>>>> + * i.MX8 NWL MIPI DSI host driver
>>>>> + *
>>>>> + * Copyright (C) 2017 NXP
>>>>> + * Copyright (C) 2019 Purism SPC
>>>>> + */
>>>>> +
>>>>> +#include <linux/clk.h>
>>>>> +#include <linux/irq.h>
>>>>> +#include <linux/mfd/syscon.h>
>>>>> +#include <linux/module.h>
>>>>> +#include <linux/mux/consumer.h>
>>>>> +#include <linux/of.h>
>>>>> +#include <linux/of_platform.h>
>>>>> +#include <linux/phy/phy.h>
>>>>> +#include <linux/reset.h>
>>>>> +#include <linux/regmap.h>
>>>> Alphabetic order
>>> Fixed for v6.
>>>
>>>>> +#include <linux/sys_soc.h>
>>>>> +
>>>>> +#include <drm/drm_atomic_helper.h>
>>>>> +#include <drm/drm_of.h>
>>>>> +#include <drm/drm_print.h>
>>>>> +#include <drm/drm_probe_helper.h>
>>>>> +
>>>>> +#include "nwl-drv.h"
>>>>> +#include "nwl-dsi.h"
>>>>> +
>>>>> +#define DRV_NAME "nwl-dsi"
>>>>> +
>>>>> +/* Possible platform specific clocks */
>>>>> +#define NWL_DSI_CLK_CORE "core"
>>>>> +
>>>>> +static const struct regmap_config nwl_dsi_regmap_config = {
>>>>> + .reg_bits = 16,
>>>>> + .val_bits = 32,
>>>>> + .reg_stride = 4,
>>>>> + .max_register = NWL_DSI_IRQ_MASK2,
>>>>> + .name = DRV_NAME,
>>>>> +};
>>>> What is the point in using regmap here, why not simple writel/readl.
>>> For me
>>>
>>> cat /sys/kernel/debug/regmap/30a00000.mipi_dsi-imx-nwl-dsi/registers
>>>
>>> justifies it's use to help debugging problems when e.g. having it
>>> connected to panels I don't own, so I think it's worth keeping if
>>> possible.
>>
>> It still sounds for me like a sledgehammer to crack a nut, but it seems
>> for many developers it is OK, so up to you.
>>
>>
>>>>> +
>>>>> +struct nwl_dsi_platform_data {
>>>>> + int (*poweron)(struct nwl_dsi *dsi);
>>>>> + int (*poweroff)(struct nwl_dsi *dsi);
>>>>> + int (*select_input)(struct nwl_dsi *dsi);
>>>>> + int (*deselect_input)(struct nwl_dsi *dsi);
>>>>> + struct nwl_dsi_plat_clk_config clk_config[NWL_DSI_MAX_PLATFORM_CLOCKS];
>>>>> +};
>>>> Another construct which do not have justification, at least for now.
>>>> Please simplify the driver, remove callbacks/intermediate
>>>> structs/quirks
>>>>
>>>> - for now they are useless.
>>>>
>>>> Unless there is a serious reason - in such case please describe it in
>>>> comments.
>>> They're needed for i.mx 8QM SoC support (the current driver only
>>> supports the i.mx 8MQ). It will be relatively easy to add with
>>> these so I expect these to show up quickly. I'll add a comment.
>>
>> That does not work well, it is impossible to review such code without
>> looking at it's usage.
>>
>> It would be better either to add 8QM driver in the same patchset showing
>> the value of these callbacks, either remove them and add later together
>> with 8QM driver.
>>
>> Maybe these callbacks are not needed at all, but without 8QM code it is
>> hard to decide.
> I agree that it's hard to plan in advance until patches show up but let
> me try to make a last argument for keeping them:
>
> - The dsi select into imx8mq_dsi_select_input was suggested by Laurent
> since they're imx8 specific
> - This would only leave poweron/off which is different between imx8mq
> and imx8qm:
>
> https://protect2.fireeye.com/url?k=83f985e06216828d.83f80eaf-93189398e1043f9e&u=https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/gpu/drm/imx/nwl_dsi-imx.c?h=imx_4.14.78_1.0.0_ga#n419
>
> if that's still not worth it, i can drop them making the driver smaller.
With bigger picture it looks better. OK lets leave it then.
>
>> Btw. naming different SoCs 8QM an 8MQ suggests i.mx engineers are quite
>> nasty :)
> It sure is.
>
>>> The quirks on the other hand only apply to some i.mx8MQ mask revisions
>>> so they need to be conditionalized. (or maybe I misunderstood you).
>>
>> I guess at the moment the driver is tested only on one platform - you
>> have not tested platforms with different set of quirks, am I correct?
> I have tested with two silicon mask revisions where one needs the quirks
> and the other doesn't and it behaved as intended.
>
>> If so, the quirk 'infrastructure' is not really tested, driver just
>> anticipates other 8MQ SoCs/platforms. Practice shows that it does not
>> work well - adding support for different revision usually require either
>> more changes either no changes at all, so this pre-mature
>> "diversification" serves nothing except unnecessary noise.
> Does the above make the diversification o.k.?
Yes, of course.
>
>>>>> +
>>>>> +static inline struct nwl_dsi *bridge_to_dsi(struct drm_bridge *bridge)
>>>>> +{
>>>>> + return container_of(bridge, struct nwl_dsi, bridge);
>>>>> +}
>>>>> +
>>>>> +static int nwl_dsi_set_platform_clocks(struct nwl_dsi *dsi, bool enable)
>>>>> +{
>>>>> + struct device *dev = dsi->dev;
>>>>> + const char *id;
>>>>> + struct clk *clk;
>>>>> + size_t i;
>>>>> + unsigned long rate;
>>>>> + int ret, result = 0;
>>>>> +
>>>>> + DRM_DEV_DEBUG_DRIVER(dev, "%s platform clocks\n",
>>>>> + enable ? "enabling" : "disabling");
>>>>> + for (i = 0; i < ARRAY_SIZE(dsi->pdata->clk_config); i++) {
>>>>> + if (!dsi->clk_config[i].present)
>>>>> + continue;
>>>>> + id = dsi->clk_config[i].id;
>>>>> + clk = dsi->clk_config[i].clk;
>>>>> +
>>>>> + if (enable) {
>>>>> + ret = clk_prepare_enable(clk);
>>>>> + if (ret < 0) {
>>>>> + DRM_DEV_ERROR(dev,
>>>>> + "Failed to enable %s clk: %d\n",
>>>>> + id, ret);
>>>>> + result = result ?: ret;
>>>>> + }
>>>>> + rate = clk_get_rate(clk);
>>>>> + DRM_DEV_DEBUG_DRIVER(dev, "Enabled %s clk @%lu Hz\n",
>>>>> + id, rate);
>>>>> + } else {
>>>>> + clk_disable_unprepare(clk);
>>>>> + DRM_DEV_DEBUG_DRIVER(dev, "Disabled %s clk\n", id);
>>>>> + }
>>>>> + }
>>>>> +
>>>>> + return result;
>>>>> +}
>>>>> +
>>>>> +static int nwl_dsi_plat_enable(struct nwl_dsi *dsi)
>>>>> +{
>>>>> + struct device *dev = dsi->dev;
>>>>> + int ret;
>>>>> +
>>>>> + if (dsi->pdata->select_input)
>>>>> + dsi->pdata->select_input(dsi);
>>>>> +
>>>>> + ret = nwl_dsi_set_platform_clocks(dsi, true);
>>>>> + if (ret < 0)
>>>>> + return ret;
>>>>> +
>>>>> + ret = dsi->pdata->poweron(dsi);
>>>>> + if (ret < 0)
>>>>> + DRM_DEV_ERROR(dev, "Failed to power on DSI: %d\n", ret);
>>>>> + return ret;
>>>>> +}
>>>>> +
>>>>> +static void nwl_dsi_plat_disable(struct nwl_dsi *dsi)
>>>>> +{
>>>>> + dsi->pdata->poweroff(dsi);
>>>>> + nwl_dsi_set_platform_clocks(dsi, false);
>>>>> + if (dsi->pdata->deselect_input)
>>>>> + dsi->pdata->deselect_input(dsi);
>>>>> +}
>>>>> +
>>>>> +static void nwl_dsi_bridge_disable(struct drm_bridge *bridge)
>>>>> +{
>>>>> + struct nwl_dsi *dsi = bridge_to_dsi(bridge);
>>>>> +
>>>>> + nwl_dsi_disable(dsi);
>>>>> + nwl_dsi_plat_disable(dsi);
>>>>> + pm_runtime_put(dsi->dev);
>>>>> +}
>>>>> +
>>>>> +static int nwl_dsi_get_dphy_params(struct nwl_dsi *dsi,
>>>>> + const struct drm_display_mode *mode,
>>>>> + union phy_configure_opts *phy_opts)
>>>>> +{
>>>>> + unsigned long rate;
>>>>> + int ret;
>>>>> +
>>>>> + if (dsi->lanes < 1 || dsi->lanes > 4)
>>>>> + return -EINVAL;
>>>>> +
>>>>> + /*
>>>>> + * So far the DPHY spec minimal timings work for both mixel
>>>>> + * dphy and nwl dsi host
>>>>> + */
>>>>> + ret = phy_mipi_dphy_get_default_config(
>>>>> + mode->crtc_clock * 1000,
>>>>> + mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes,
>>>>> + &phy_opts->mipi_dphy);
>>>>> + if (ret < 0)
>>>>> + return ret;
>>>>> +
>>>>> + rate = clk_get_rate(dsi->tx_esc_clk);
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev, "LP clk is @%lu Hz\n", rate);
>>>>> + phy_opts->mipi_dphy.lp_clk_rate = rate;
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static bool nwl_dsi_bridge_mode_fixup(struct drm_bridge *bridge,
>>>>> + const struct drm_display_mode *mode,
>>>>> + struct drm_display_mode *adjusted_mode)
>>>>> +{
>>>>> + /* At least LCDIF + NWL needs active high sync */
>>>>> + adjusted_mode->flags |= (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
>>>>> + adjusted_mode->flags &= ~(DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
>>>>> +
>>>>> + return true;
>>>>> +}
>>>>> +
>>>>> +static enum drm_mode_status
>>>>> +nwl_dsi_bridge_mode_valid(struct drm_bridge *bridge,
>>>>> + const struct drm_display_mode *mode)
>>>>> +{
>>>>> + struct nwl_dsi *dsi = bridge_to_dsi(bridge);
>>>>> + int bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
>>>>> +
>>>>> + if (mode->clock * bpp > 15000000 * dsi->lanes)
>>>>> + return MODE_CLOCK_HIGH;
>>>>> +
>>>>> + if (mode->clock * bpp < 80000 * dsi->lanes)
>>>>> + return MODE_CLOCK_LOW;
>>>>> +
>>>>> + return MODE_OK;
>>>>> +}
>>>>> +
>>>>> +static void
>>>>> +nwl_dsi_bridge_mode_set(struct drm_bridge *bridge,
>>>>> + const struct drm_display_mode *mode,
>>>>> + const struct drm_display_mode *adjusted_mode)
>>>>> +{
>>>>> + struct nwl_dsi *dsi = bridge_to_dsi(bridge);
>>>>> + struct device *dev = dsi->dev;
>>>>> + union phy_configure_opts new_cfg;
>>>>> + unsigned long phy_ref_rate;
>>>>> + int ret;
>>>>> +
>>>>> + ret = nwl_dsi_get_dphy_params(dsi, adjusted_mode, &new_cfg);
>>>>> + if (ret < 0)
>>>>> + return;
>>>>> +
>>>>> + /*
>>>>> + * If hs clock is unchanged, we're all good - all parameters are
>>>>> + * derived from it atm.
>>>>> + */
>>>>> + if (new_cfg.mipi_dphy.hs_clk_rate == dsi->phy_cfg.mipi_dphy.hs_clk_rate)
>>>>> + return;
>>>>> +
>>>>> + phy_ref_rate = clk_get_rate(dsi->phy_ref_clk);
>>>>> + DRM_DEV_DEBUG_DRIVER(dev, "PHY at ref rate: %lu\n", phy_ref_rate);
>>>>> + /* Save the new desired phy config */
>>>>> + memcpy(&dsi->phy_cfg, &new_cfg, sizeof(new_cfg));
>>>>> +
>>>>> + memcpy(&dsi->mode, adjusted_mode, sizeof(dsi->mode));
>>>>> + drm_mode_debug_printmodeline(adjusted_mode);
>>>>> +}
>>>>> +
>>>>> +static void nwl_dsi_bridge_pre_enable(struct drm_bridge *bridge)
>>>>> +{
>>>>> + struct nwl_dsi *dsi = bridge_to_dsi(bridge);
>>>>> +
>>>>> + pm_runtime_get_sync(dsi->dev);
>>>>> + nwl_dsi_plat_enable(dsi);
>>>>> + nwl_dsi_enable(dsi);
>>>>> +}
>>>>> +
>>>>> +static int nwl_dsi_bridge_attach(struct drm_bridge *bridge)
>>>>> +{
>>>>> + struct nwl_dsi *dsi = bridge->driver_private;
>>>>> +
>>>>> + return drm_bridge_attach(bridge->encoder, dsi->panel_bridge, bridge);
>>>>> +}
>>>>> +
>>>>> +static const struct drm_bridge_funcs nwl_dsi_bridge_funcs = {
>>>>> + .pre_enable = nwl_dsi_bridge_pre_enable,
>>>>> + .disable = nwl_dsi_bridge_disable,
>>>>> + .mode_fixup = nwl_dsi_bridge_mode_fixup,
>>>>> + .mode_set = nwl_dsi_bridge_mode_set,
>>>>> + .mode_valid = nwl_dsi_bridge_mode_valid,
>>>>> + .attach = nwl_dsi_bridge_attach,
>>>>> +};
>>>>> +
>>>>> +static int nwl_dsi_parse_dt(struct nwl_dsi *dsi)
>>>>> +{
>>>>> + struct platform_device *pdev = to_platform_device(dsi->dev);
>>>>> + struct clk *clk;
>>>>> + const char *clk_id;
>>>>> + void __iomem *base;
>>>>> + int i, ret;
>>>>> +
>>>>> + dsi->phy = devm_phy_get(dsi->dev, "dphy");
>>>>> + if (IS_ERR(dsi->phy)) {
>>>>> + ret = PTR_ERR(dsi->phy);
>>>>> + if (ret != -EPROBE_DEFER)
>>>>> + DRM_DEV_ERROR(dsi->dev, "Could not get PHY: %d\n", ret);
>>>>> + return ret;
>>>>> + }
>>>>> +
>>>>> + /* Platform dependent clocks */
>>>>> + memcpy(dsi->clk_config, dsi->pdata->clk_config,
>>>>> + sizeof(dsi->pdata->clk_config));
>>>>> +
>>>>> + for (i = 0; i < ARRAY_SIZE(dsi->pdata->clk_config); i++) {
>>>>> + if (!dsi->clk_config[i].present)
>>>>> + continue;
>>>>> +
>>>>> + clk_id = dsi->clk_config[i].id;
>>>>> + clk = devm_clk_get(dsi->dev, clk_id);
>>>>> + if (IS_ERR(clk)) {
>>>>> + ret = PTR_ERR(clk);
>>>>> + DRM_DEV_ERROR(dsi->dev, "Failed to get %s clock: %d\n",
>>>>> + clk_id, ret);
>>>>> + return ret;
>>>>> + }
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev, "Setup clk %s (rate: %lu)\n",
>>>>> + clk_id, clk_get_rate(clk));
>>>>> + dsi->clk_config[i].clk = clk;
>>>>> + }
>>>>> +
>>>>> + /* DSI clocks */
>>>>> + clk = devm_clk_get(dsi->dev, "phy_ref");
>>>>> + if (IS_ERR(clk)) {
>>>>> + ret = PTR_ERR(clk);
>>>>> + DRM_DEV_ERROR(dsi->dev, "Failed to get phy_ref clock: %d\n",
>>>>> + ret);
>>>>> + return ret;
>>>>> + }
>>>>> + dsi->phy_ref_clk = clk;
>>>>> +
>>>>> + clk = devm_clk_get(dsi->dev, "rx_esc");
>>>>> + if (IS_ERR(clk)) {
>>>>> + ret = PTR_ERR(clk);
>>>>> + DRM_DEV_ERROR(dsi->dev, "Failed to get rx_esc clock: %d\n",
>>>>> + ret);
>>>>> + return ret;
>>>>> + }
>>>>> + dsi->rx_esc_clk = clk;
>>>>> +
>>>>> + clk = devm_clk_get(dsi->dev, "tx_esc");
>>>>> + if (IS_ERR(clk)) {
>>>>> + ret = PTR_ERR(clk);
>>>>> + DRM_DEV_ERROR(dsi->dev, "Failed to get tx_esc clock: %d\n",
>>>>> + ret);
>>>>> + return ret;
>>>>> + }
>>>>> + dsi->tx_esc_clk = clk;
>>>>> +
>>>>> + dsi->mux = devm_mux_control_get(dsi->dev, NULL);
>>>>> + if (IS_ERR(dsi->mux)) {
>>>>> + ret = PTR_ERR(dsi->mux);
>>>>> + if (ret != -EPROBE_DEFER)
>>>>> + DRM_DEV_ERROR(dsi->dev, "Failed to get mux: %d\n", ret);
>>>>> + return ret;
>>>>> + }
>>>>> +
>>>>> + base = devm_platform_ioremap_resource(pdev, 0);
>>>>> + if (IS_ERR(base))
>>>>> + return PTR_ERR(base);
>>>>> +
>>>>> + dsi->regmap =
>>>>> + devm_regmap_init_mmio(dsi->dev, base, &nwl_dsi_regmap_config);
>>>>> + if (IS_ERR(dsi->regmap)) {
>>>>> + ret = PTR_ERR(dsi->regmap);
>>>>> + DRM_DEV_ERROR(dsi->dev, "Failed to create NWL DSI regmap: %d\n",
>>>>> + ret);
>>>>> + return ret;
>>>>> + }
>>>>> +
>>>>> + dsi->irq = platform_get_irq(pdev, 0);
>>>>> + if (dsi->irq < 0) {
>>>>> + DRM_DEV_ERROR(dsi->dev, "Failed to get device IRQ: %d\n",
>>>>> + dsi->irq);
>>>>> + return dsi->irq;
>>>>> + }
>>>>> +
>>>>> + dsi->rstc = devm_reset_control_array_get(dsi->dev, false, true);
>>>>> + if (IS_ERR(dsi->rstc)) {
>>>>> + DRM_DEV_ERROR(dsi->dev, "Failed to get resets: %ld\n",
>>>>> + PTR_ERR(dsi->rstc));
>>>>> + return PTR_ERR(dsi->rstc);
>>>>> + }
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static int imx8mq_dsi_select_input(struct nwl_dsi *dsi)
>>>>> +{
>>>>> + struct device_node *remote;
>>>>> + u32 use_dcss = 1;
>>>>> + int ret;
>>>>> +
>>>>> + remote = of_graph_get_remote_node(dsi->dev->of_node, 0, 0);
>>>>> + if (strcmp(remote->name, "lcdif") == 0)
>>>>> + use_dcss = 0;
>>>> Relying on node name seems to me wrong. I am not sure if whole logic for
>>>> input select should be here.
>>>>
>>>> My 1st impression is that selecting should be done rather in DCSS or
>>>> LCDIF driver, why do you want to put it here?
>>> Doing it in here keeps it at a single location where on the other hand
>>> it would need to be done in mxsfb (which handles other SoCs as well) and
>>> upcoming dcss. Also we can have in the dsi enable path which e.g. mxsfb
>>> doesn't even know about at this point.
>>
>> But as I understand mux is not a part of this IP. It is always
>> problematic what to do with such small pieces of hw.
>>
>> Let's keep it here until someone find better solution.
>>
>> Btw do you have public tree for testing platforms with this driver, I am
>> curious about this mux device.
> https://protect2.fireeye.com/url?k=05ccbdf61eba9fd2.05cd36b9-6ae2ecc63ea6128d&u=https://source.puri.sm/guido.gunther/linux-imx8/blob/forward-upstream/next-20190823/mxsfb+nwl/v4/arch/arm64/boot/dts/freescale/imx8mq.dtsi#L477
>
> it was prompted by
>
> https://protect2.fireeye.com/url?k=342f39cc74442e56.342eb283-377419f62357e53d&u=https://lists.freedesktop.org/archives/dri-devel/2019-August/230868.html
Thx for links here and above, they better prove value of your code.
Regards
Andrzej
>
> Cheers and thanks again for your comments,
> -- Guido
>
>>
>> Regards
>>
>> Andrzej
>>
>>
>>> Cheers,
>>> -- Guido
>>>
>>>> Regards
>>>>
>>>> Andrzej
>>>>
>>>>
>>>>> +
>>>>> + DRM_DEV_INFO(dsi->dev, "Using %s as input source\n",
>>>>> + (use_dcss) ? "DCSS" : "LCDIF");
>>>>> +
>>>>> + ret = mux_control_try_select(dsi->mux, use_dcss);
>>>>> + if (ret < 0)
>>>>> + DRM_DEV_ERROR(dsi->dev, "Failed to select input: %d\n", ret);
>>>>> +
>>>>> + of_node_put(remote);
>>>>> + return ret;
>>>>> +}
>>>>> +
>>>>> +
>>>>> +static int imx8mq_dsi_deselect_input(struct nwl_dsi *dsi)
>>>>> +{
>>>>> + int ret;
>>>>> +
>>>>> + ret = mux_control_deselect(dsi->mux);
>>>>> + if (ret < 0)
>>>>> + DRM_DEV_ERROR(dsi->dev, "Failed to deselect input: %d\n", ret);
>>>>> +
>>>>> + return ret;
>>>>> +}
>>>>> +
>>>>> +
>>>>> +static int imx8mq_dsi_poweron(struct nwl_dsi *dsi)
>>>>> +{
>>>>> + int ret = 0;
>>>>> +
>>>>> + /* otherwise the display stays blank */
>>>>> + usleep_range(200, 300);
>>>>> +
>>>>> + if (dsi->rstc)
>>>>> + ret = reset_control_deassert(dsi->rstc);
>>>>> +
>>>>> + return ret;
>>>>> +}
>>>>> +
>>>>> +static int imx8mq_dsi_poweroff(struct nwl_dsi *dsi)
>>>>> +{
>>>>> + int ret = 0;
>>>>> +
>>>>> + if (dsi->quirks & SRC_RESET_QUIRK)
>>>>> + return 0;
>>>>> +
>>>>> + if (dsi->rstc)
>>>>> + ret = reset_control_assert(dsi->rstc);
>>>>> + return ret;
>>>>> +}
>>>>> +
>>>>> +static const struct drm_bridge_timings nwl_dsi_timings = {
>>>>> + .input_bus_flags = DRM_BUS_FLAG_DE_LOW,
>>>>> +};
>>>>> +
>>>>> +static const struct nwl_dsi_platform_data imx8mq_dev = {
>>>>> + .poweron = &imx8mq_dsi_poweron,
>>>>> + .poweroff = &imx8mq_dsi_poweroff,
>>>>> + .select_input = &imx8mq_dsi_select_input,
>>>>> + .deselect_input = &imx8mq_dsi_deselect_input,
>>>>> + .clk_config = {
>>>>> + { .id = NWL_DSI_CLK_CORE, .present = true },
>>>>> + },
>>>>> +};
>>>>> +
>>>>> +static const struct of_device_id nwl_dsi_dt_ids[] = {
>>>>> + { .compatible = "fsl,imx8mq-nwl-dsi", .data = &imx8mq_dev, },
>>>>> + { /* sentinel */ }
>>>>> +};
>>>>> +MODULE_DEVICE_TABLE(of, nwl_dsi_dt_ids);
>>>>> +
>>>>> +static const struct soc_device_attribute nwl_dsi_quirks_match[] = {
>>>>> + { .soc_id = "i.MX8MQ", .revision = "2.0",
>>>>> + .data = (void *)(E11418_HS_MODE_QUIRK | SRC_RESET_QUIRK) },
>>>>> + { /* sentinel. */ },
>>>>> +};
>>>>> +
>>>>> +static int nwl_dsi_probe(struct platform_device *pdev)
>>>>> +{
>>>>> + struct device *dev = &pdev->dev;
>>>>> + const struct of_device_id *of_id = of_match_device(nwl_dsi_dt_ids, dev);
>>>>> + const struct nwl_dsi_platform_data *pdata = of_id->data;
>>>>> + const struct soc_device_attribute *attr;
>>>>> + struct nwl_dsi *dsi;
>>>>> + int ret;
>>>>> +
>>>>> + dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
>>>>> + if (!dsi)
>>>>> + return -ENOMEM;
>>>>> +
>>>>> + dsi->dev = dev;
>>>>> + dsi->pdata = pdata;
>>>>> +
>>>>> + ret = nwl_dsi_parse_dt(dsi);
>>>>> + if (ret)
>>>>> + return ret;
>>>>> +
>>>>> + ret = devm_request_irq(dev, dsi->irq, nwl_dsi_irq_handler, 0,
>>>>> + dev_name(dev), dsi);
>>>>> + if (ret < 0) {
>>>>> + DRM_DEV_ERROR(dev, "Failed to request IRQ %d: %d\n", dsi->irq,
>>>>> + ret);
>>>>> + return ret;
>>>>> + }
>>>>> +
>>>>> + dsi->dsi_host.ops = &nwl_dsi_host_ops;
>>>>> + dsi->dsi_host.dev = dev;
>>>>> + ret = mipi_dsi_host_register(&dsi->dsi_host);
>>>>> + if (ret) {
>>>>> + DRM_DEV_ERROR(dev, "Failed to register MIPI host: %d\n", ret);
>>>>> + return ret;
>>>>> + }
>>>>> +
>>>>> + attr = soc_device_match(nwl_dsi_quirks_match);
>>>>> + if (attr)
>>>>> + dsi->quirks = (uintptr_t)attr->data;
>>>>> +
>>>>> + dsi->bridge.driver_private = dsi;
>>>>> + dsi->bridge.funcs = &nwl_dsi_bridge_funcs;
>>>>> + dsi->bridge.of_node = dev->of_node;
>>>>> + dsi->bridge.timings = &nwl_dsi_timings;
>>>>> +
>>>>> + dev_set_drvdata(dev, dsi);
>>>>> + pm_runtime_enable(dev);
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static int nwl_dsi_remove(struct platform_device *pdev)
>>>>> +{
>>>>> + struct nwl_dsi *dsi = platform_get_drvdata(pdev);
>>>>> +
>>>>> + mipi_dsi_host_unregister(&dsi->dsi_host);
>>>>> + pm_runtime_disable(&pdev->dev);
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static struct platform_driver nwl_dsi_driver = {
>>>>> + .probe = nwl_dsi_probe,
>>>>> + .remove = nwl_dsi_remove,
>>>>> + .driver = {
>>>>> + .of_match_table = nwl_dsi_dt_ids,
>>>>> + .name = DRV_NAME,
>>>>> + },
>>>>> +};
>>>>> +
>>>>> +module_platform_driver(nwl_dsi_driver);
>>>>> +
>>>>> +MODULE_AUTHOR("NXP Semiconductor");
>>>>> +MODULE_AUTHOR("Purism SPC");
>>>>> +MODULE_DESCRIPTION("Northwest Logic MIPI-DSI driver");
>>>>> +MODULE_LICENSE("GPL"); /* GPLv2 or later */
>>>>> diff --git a/drivers/gpu/drm/bridge/nwl-dsi/nwl-drv.h b/drivers/gpu/drm/bridge/nwl-dsi/nwl-drv.h
>>>>> new file mode 100644
>>>>> index 000000000000..1e72a9221401
>>>>> --- /dev/null
>>>>> +++ b/drivers/gpu/drm/bridge/nwl-dsi/nwl-drv.h
>>>>> @@ -0,0 +1,65 @@
>>>>> +/* SPDX-License-Identifier: GPL-2.0+ */
>>>>> +/*
>>>>> + * NWL MIPI DSI host driver
>>>>> + *
>>>>> + * Copyright (C) 2017 NXP
>>>>> + * Copyright (C) 2019 Purism SPC
>>>>> + */
>>>>> +
>>>>> +#ifndef __NWL_DRV_H__
>>>>> +#define __NWL_DRV_H__
>>>>> +
>>>>> +#include <linux/mux/consumer.h>
>>>>> +#include <linux/phy/phy.h>
>>>>> +
>>>>> +#include <drm/drm_bridge.h>
>>>>> +#include <drm/drm_mipi_dsi.h>
>>>>> +
>>>>> +struct nwl_dsi_platform_data;
>>>>> +
>>>>> +/* i.MX8 NWL quirks */
>>>>> +/* i.MX8MQ errata E11418 */
>>>>> +#define E11418_HS_MODE_QUIRK BIT(0)
>>>>> +/* Skip DSI bits in SRC on disable to avoid blank display on enable */
>>>>> +#define SRC_RESET_QUIRK BIT(1)
>>>>> +
>>>>> +#define NWL_DSI_MAX_PLATFORM_CLOCKS 1
>>>>> +struct nwl_dsi_plat_clk_config {
>>>>> + const char *id;
>>>>> + struct clk *clk;
>>>>> + bool present;
>>>>> +};
>>>>> +
>>>>> +struct nwl_dsi {
>>>>> + struct drm_bridge bridge;
>>>>> + struct mipi_dsi_host dsi_host;
>>>>> + struct drm_bridge *panel_bridge;
>>>>> + struct device *dev;
>>>>> + struct phy *phy;
>>>>> + union phy_configure_opts phy_cfg;
>>>>> + unsigned int quirks;
>>>>> +
>>>>> + struct regmap *regmap;
>>>>> + int irq;
>>>>> + struct reset_control *rstc;
>>>>> + struct mux_control *mux;
>>>>> +
>>>>> + /* DSI clocks */
>>>>> + struct clk *phy_ref_clk;
>>>>> + struct clk *rx_esc_clk;
>>>>> + struct clk *tx_esc_clk;
>>>>> + /* Platform dependent clocks */
>>>>> + struct nwl_dsi_plat_clk_config clk_config[NWL_DSI_MAX_PLATFORM_CLOCKS];
>>>>> +
>>>>> + /* dsi lanes */
>>>>> + u32 lanes;
>>>>> + enum mipi_dsi_pixel_format format;
>>>>> + struct drm_display_mode mode;
>>>>> + unsigned long dsi_mode_flags;
>>>>> +
>>>>> + struct nwl_dsi_transfer *xfer;
>>>>> +
>>>>> + const struct nwl_dsi_platform_data *pdata;
>>>>> +};
>>>>> +
>>>>> +#endif /* __NWL_DRV_H__ */
>>>>> diff --git a/drivers/gpu/drm/bridge/nwl-dsi/nwl-dsi.c b/drivers/gpu/drm/bridge/nwl-dsi/nwl-dsi.c
>>>>> new file mode 100644
>>>>> index 000000000000..e6038cb4e849
>>>>> --- /dev/null
>>>>> +++ b/drivers/gpu/drm/bridge/nwl-dsi/nwl-dsi.c
>>>>> @@ -0,0 +1,696 @@
>>>>> +// SPDX-License-Identifier: GPL-2.0+
>>>>> +/*
>>>>> + * NWL MIPI DSI host driver
>>>>> + *
>>>>> + * Copyright (C) 2017 NXP
>>>>> + * Copyright (C) 2019 Purism SPC
>>>>> + */
>>>>> +
>>>>> +#include <linux/bitfield.h>
>>>>> +#include <linux/clk.h>
>>>>> +#include <linux/irq.h>
>>>>> +#include <linux/math64.h>
>>>>> +#include <linux/regmap.h>
>>>>> +#include <linux/time64.h>
>>>>> +
>>>>> +#include <video/mipi_display.h>
>>>>> +#include <video/videomode.h>
>>>>> +
>>>>> +#include <drm/drm_atomic_helper.h>
>>>>> +#include <drm/drm_crtc_helper.h>
>>>>> +#include <drm/drm_of.h>
>>>>> +#include <drm/drm_panel.h>
>>>>> +#include <drm/drm_print.h>
>>>>> +
>>>>> +#include "nwl-drv.h"
>>>>> +#include "nwl-dsi.h"
>>>>> +
>>>>> +#define NWL_DSI_MIPI_FIFO_TIMEOUT msecs_to_jiffies(500)
>>>>> +
>>>>> +/*
>>>>> + * PKT_CONTROL format:
>>>>> + * [15: 0] - word count
>>>>> + * [17:16] - virtual channel
>>>>> + * [23:18] - data type
>>>>> + * [24] - LP or HS select (0 - LP, 1 - HS)
>>>>> + * [25] - perform BTA after packet is sent
>>>>> + * [26] - perform BTA only, no packet tx
>>>>> + */
>>>>> +#define NWL_DSI_WC(x) FIELD_PREP(GENMASK(15, 0), (x))
>>>>> +#define NWL_DSI_TX_VC(x) FIELD_PREP(GENMASK(17, 16), (x))
>>>>> +#define NWL_DSI_TX_DT(x) FIELD_PREP(GENMASK(23, 18), (x))
>>>>> +#define NWL_DSI_HS_SEL(x) FIELD_PREP(GENMASK(24, 24), (x))
>>>>> +#define NWL_DSI_BTA_TX(x) FIELD_PREP(GENMASK(25, 25), (x))
>>>>> +#define NWL_DSI_BTA_NO_TX(x) FIELD_PREP(GENMASK(26, 26), (x))
>>>>> +
>>>>> +/*
>>>>> + * RX_PKT_HEADER format:
>>>>> + * [15: 0] - word count
>>>>> + * [21:16] - data type
>>>>> + * [23:22] - virtual channel
>>>>> + */
>>>>> +#define NWL_DSI_RX_DT(x) FIELD_GET(GENMASK(21, 16), (x))
>>>>> +#define NWL_DSI_RX_VC(x) FIELD_GET(GENMASK(23, 22), (x))
>>>>> +
>>>>> +/* DSI Video mode */
>>>>> +#define NWL_DSI_VM_BURST_MODE_WITH_SYNC_PULSES 0
>>>>> +#define NWL_DSI_VM_NON_BURST_MODE_WITH_SYNC_EVENTS BIT(0)
>>>>> +#define NWL_DSI_VM_BURST_MODE BIT(1)
>>>>> +
>>>>> +/* * DPI color coding */
>>>>> +#define NWL_DSI_DPI_16_BIT_565_PACKED 0
>>>>> +#define NWL_DSI_DPI_16_BIT_565_ALIGNED 1
>>>>> +#define NWL_DSI_DPI_16_BIT_565_SHIFTED 2
>>>>> +#define NWL_DSI_DPI_18_BIT_PACKED 3
>>>>> +#define NWL_DSI_DPI_18_BIT_ALIGNED 4
>>>>> +#define NWL_DSI_DPI_24_BIT 5
>>>>> +
>>>>> +/* * DPI Pixel format */
>>>>> +#define NWL_DSI_PIXEL_FORMAT_16 0
>>>>> +#define NWL_DSI_PIXEL_FORMAT_18 BIT(0)
>>>>> +#define NWL_DSI_PIXEL_FORMAT_18L BIT(1)
>>>>> +#define NWL_DSI_PIXEL_FORMAT_24 (BIT(0) | BIT(1))
>>>>> +
>>>>> +enum transfer_direction {
>>>>> + DSI_PACKET_SEND,
>>>>> + DSI_PACKET_RECEIVE,
>>>>> +};
>>>>> +
>>>>> +struct nwl_dsi_transfer {
>>>>> + const struct mipi_dsi_msg *msg;
>>>>> + struct mipi_dsi_packet packet;
>>>>> + struct completion completed;
>>>>> +
>>>>> + int status; /* status of transmission */
>>>>> + enum transfer_direction direction;
>>>>> + bool need_bta;
>>>>> + u8 cmd;
>>>>> + u16 rx_word_count;
>>>>> + size_t tx_len; /* in bytes */
>>>>> + size_t rx_len; /* in bytes */
>>>>> +};
>>>>> +
>>>>> +static int nwl_dsi_write(struct nwl_dsi *dsi, unsigned int reg, u32 val)
>>>>> +{
>>>>> + int ret;
>>>>> +
>>>>> + ret = regmap_write(dsi->regmap, reg, val);
>>>>> + if (ret < 0)
>>>>> + DRM_DEV_ERROR(dsi->dev,
>>>>> + "Failed to write NWL DSI reg 0x%x: %d\n", reg,
>>>>> + ret);
>>>>> + return ret;
>>>>> +}
>>>>> +
>>>>> +static u32 nwl_dsi_read(struct nwl_dsi *dsi, u32 reg)
>>>>> +{
>>>>> + unsigned int val;
>>>>> + int ret;
>>>>> +
>>>>> + ret = regmap_read(dsi->regmap, reg, &val);
>>>>> + if (ret < 0)
>>>>> + DRM_DEV_ERROR(dsi->dev, "Failed to read NWL DSI reg 0x%x: %d\n",
>>>>> + reg, ret);
>>>>> +
>>>>> + return val;
>>>>> +}
>>>>> +
>>>>> +static u32 nwl_dsi_get_dpi_pixel_format(enum mipi_dsi_pixel_format format)
>>>>> +{
>>>>> + switch (format) {
>>>>> + case MIPI_DSI_FMT_RGB565:
>>>>> + return NWL_DSI_PIXEL_FORMAT_16;
>>>>> + case MIPI_DSI_FMT_RGB666:
>>>>> + return NWL_DSI_PIXEL_FORMAT_18L;
>>>>> + case MIPI_DSI_FMT_RGB666_PACKED:
>>>>> + return NWL_DSI_PIXEL_FORMAT_18;
>>>>> + case MIPI_DSI_FMT_RGB888:
>>>>> + return NWL_DSI_PIXEL_FORMAT_24;
>>>>> + default:
>>>>> + return -EINVAL;
>>>>> + }
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * ps2bc - Picoseconds to byte clock cycles
>>>>> + */
>>>>> +static u32 ps2bc(struct nwl_dsi *dsi, unsigned long long ps)
>>>>> +{
>>>>> + u32 bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
>>>>> +
>>>>> + return DIV64_U64_ROUND_UP(ps * dsi->mode.clock * bpp,
>>>>> + dsi->lanes * 8 * NSEC_PER_SEC);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * ui2bc - UI time periods to byte clock cycles
>>>>> + */
>>>>> +static u32 ui2bc(struct nwl_dsi *dsi, unsigned long long ui)
>>>>> +{
>>>>> + u32 bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
>>>>> +
>>>>> + return DIV64_U64_ROUND_UP(ui * dsi->lanes,
>>>>> + dsi->mode.clock * 1000 * bpp);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * us2bc - micro seconds to lp clock cycles
>>>>> + */
>>>>> +static u32 us2lp(u32 lp_clk_rate, unsigned long us)
>>>>> +{
>>>>> + return DIV_ROUND_UP(us * lp_clk_rate, USEC_PER_SEC);
>>>>> +}
>>>>> +
>>>>> +static int nwl_dsi_config_host(struct nwl_dsi *dsi)
>>>>> +{
>>>>> + u32 cycles;
>>>>> + struct phy_configure_opts_mipi_dphy *cfg = &dsi->phy_cfg.mipi_dphy;
>>>>> +
>>>>> + if (dsi->lanes < 1 || dsi->lanes > 4)
>>>>> + return -EINVAL;
>>>>> +
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev, "DSI Lanes %d\n", dsi->lanes);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_CFG_NUM_LANES, dsi->lanes - 1);
>>>>> +
>>>>> + if (dsi->dsi_mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) {
>>>>> + nwl_dsi_write(dsi, NWL_DSI_CFG_NONCONTINUOUS_CLK, 0x01);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_CFG_AUTOINSERT_EOTP, 0x01);
>>>>> + } else {
>>>>> + nwl_dsi_write(dsi, NWL_DSI_CFG_NONCONTINUOUS_CLK, 0x00);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_CFG_AUTOINSERT_EOTP, 0x00);
>>>>> + }
>>>>> +
>>>>> + /* values in byte clock cycles */
>>>>> + cycles = ui2bc(dsi, cfg->clk_pre);
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_t_pre: 0x%x\n", cycles);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_CFG_T_PRE, cycles);
>>>>> + cycles = ps2bc(dsi, cfg->lpx + cfg->clk_prepare + cfg->clk_zero);
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_tx_gap (pre): 0x%x\n", cycles);
>>>>> + cycles += ui2bc(dsi, cfg->clk_pre);
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_t_post: 0x%x\n", cycles);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_CFG_T_POST, cycles);
>>>>> + cycles = ps2bc(dsi, cfg->hs_exit);
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_tx_gap: 0x%x\n", cycles);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_CFG_TX_GAP, cycles);
>>>>> +
>>>>> + nwl_dsi_write(dsi, NWL_DSI_CFG_EXTRA_CMDS_AFTER_EOTP, 0x01);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_CFG_HTX_TO_COUNT, 0x00);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_CFG_LRX_H_TO_COUNT, 0x00);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_CFG_BTA_H_TO_COUNT, 0x00);
>>>>> + /* In LP clock cycles */
>>>>> + cycles = us2lp(cfg->lp_clk_rate, cfg->wakeup);
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_twakeup: 0x%x\n", cycles);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_CFG_TWAKEUP, cycles);
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static int nwl_dsi_config_dpi(struct nwl_dsi *dsi)
>>>>> +{
>>>>> + u32 color_format, mode;
>>>>> + bool burst_mode;
>>>>> + int hfront_porch, hback_porch, vfront_porch, vback_porch;
>>>>> + int hsync_len, vsync_len;
>>>>> +
>>>>> + hfront_porch = dsi->mode.hsync_start - dsi->mode.hdisplay;
>>>>> + hsync_len = dsi->mode.hsync_end - dsi->mode.hsync_start;
>>>>> + hback_porch = dsi->mode.htotal - dsi->mode.hsync_end;
>>>>> +
>>>>> + vfront_porch = dsi->mode.vsync_start - dsi->mode.vdisplay;
>>>>> + vsync_len = dsi->mode.vsync_end - dsi->mode.vsync_start;
>>>>> + vback_porch = dsi->mode.vtotal - dsi->mode.vsync_end;
>>>>> +
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev, "hfront_porch = %d\n", hfront_porch);
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev, "hback_porch = %d\n", hback_porch);
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev, "hsync_len = %d\n", hsync_len);
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev, "hdisplay = %d\n", dsi->mode.hdisplay);
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev, "vfront_porch = %d\n", vfront_porch);
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev, "vback_porch = %d\n", vback_porch);
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev, "vsync_len = %d\n", vsync_len);
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev, "vactive = %d\n", dsi->mode.vdisplay);
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev, "clock = %d kHz\n", dsi->mode.clock);
>>>>> +
>>>>> + color_format = nwl_dsi_get_dpi_pixel_format(dsi->format);
>>>>> + if (color_format < 0) {
>>>>> + DRM_DEV_ERROR(dsi->dev, "Invalid color format 0x%x\n",
>>>>> + dsi->format);
>>>>> + return color_format;
>>>>> + }
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev, "pixel fmt = %d\n", dsi->format);
>>>>> +
>>>>> + nwl_dsi_write(dsi, NWL_DSI_INTERFACE_COLOR_CODING, NWL_DSI_DPI_24_BIT);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_PIXEL_FORMAT, color_format);
>>>>> + /*
>>>>> + * Adjusting input polarity based on the video mode results in
>>>>> + * a black screen so always pick active low:
>>>>> + */
>>>>> + nwl_dsi_write(dsi, NWL_DSI_VSYNC_POLARITY,
>>>>> + NWL_DSI_VSYNC_POLARITY_ACTIVE_LOW);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_HSYNC_POLARITY,
>>>>> + NWL_DSI_HSYNC_POLARITY_ACTIVE_LOW);
>>>>> +
>>>>> + burst_mode = (dsi->dsi_mode_flags & MIPI_DSI_MODE_VIDEO_BURST) &&
>>>>> + !(dsi->dsi_mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE);
>>>>> +
>>>>> + if (burst_mode) {
>>>>> + nwl_dsi_write(dsi, NWL_DSI_VIDEO_MODE, NWL_DSI_VM_BURST_MODE);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_PIXEL_FIFO_SEND_LEVEL, 256);
>>>>> + } else {
>>>>> + mode = ((dsi->dsi_mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) ?
>>>>> + NWL_DSI_VM_BURST_MODE_WITH_SYNC_PULSES :
>>>>> + NWL_DSI_VM_NON_BURST_MODE_WITH_SYNC_EVENTS);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_VIDEO_MODE, mode);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_PIXEL_FIFO_SEND_LEVEL,
>>>>> + dsi->mode.hdisplay);
>>>>> + }
>>>>> +
>>>>> + nwl_dsi_write(dsi, NWL_DSI_HFP, hfront_porch);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_HBP, hback_porch);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_HSA, hsync_len);
>>>>> +
>>>>> + nwl_dsi_write(dsi, NWL_DSI_ENABLE_MULT_PKTS, 0x0);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_BLLP_MODE, 0x1);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_USE_NULL_PKT_BLLP, 0x0);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_VC, 0x0);
>>>>> +
>>>>> + nwl_dsi_write(dsi, NWL_DSI_PIXEL_PAYLOAD_SIZE, dsi->mode.hdisplay);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_VACTIVE, dsi->mode.vdisplay - 1);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_VBP, vback_porch);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_VFP, vfront_porch);
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static void nwl_dsi_init_interrupts(struct nwl_dsi *dsi)
>>>>> +{
>>>>> + u32 irq_enable;
>>>>> +
>>>>> + nwl_dsi_write(dsi, NWL_DSI_IRQ_MASK, 0xffffffff);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_IRQ_MASK2, 0x7);
>>>>> +
>>>>> + irq_enable = ~(u32)(NWL_DSI_TX_PKT_DONE_MASK |
>>>>> + NWL_DSI_RX_PKT_HDR_RCVD_MASK |
>>>>> + NWL_DSI_TX_FIFO_OVFLW_MASK |
>>>>> + NWL_DSI_HS_TX_TIMEOUT_MASK);
>>>>> +
>>>>> + nwl_dsi_write(dsi, NWL_DSI_IRQ_MASK, irq_enable);
>>>>> +}
>>>>> +
>>>>> +static int nwl_dsi_host_attach(struct mipi_dsi_host *dsi_host,
>>>>> + struct mipi_dsi_device *device)
>>>>> +{
>>>>> + struct nwl_dsi *dsi = container_of(dsi_host, struct nwl_dsi, dsi_host);
>>>>> + struct device *dev = dsi->dev;
>>>>> + struct drm_bridge *bridge;
>>>>> + struct drm_panel *panel;
>>>>> + int ret;
>>>>> +
>>>>> + DRM_DEV_INFO(dev, "lanes=%u, format=0x%x flags=0x%lx\n", device->lanes,
>>>>> + device->format, device->mode_flags);
>>>>> +
>>>>> + if (device->lanes < 1 || device->lanes > 4)
>>>>> + return -EINVAL;
>>>>> +
>>>>> + dsi->lanes = device->lanes;
>>>>> + dsi->format = device->format;
>>>>> + dsi->dsi_mode_flags = device->mode_flags;
>>>>> +
>>>>> + ret = drm_of_find_panel_or_bridge(dsi->dev->of_node, 1, 0, &panel,
>>>>> + &bridge);
>>>>> + if (ret)
>>>>> + return ret;
>>>>> +
>>>>> + if (panel) {
>>>>> + bridge = drm_panel_bridge_add(panel, DRM_MODE_CONNECTOR_DSI);
>>>>> + if (IS_ERR(bridge))
>>>>> + return PTR_ERR(bridge);
>>>>> + }
>>>>> +
>>>>> + dsi->panel_bridge = bridge;
>>>>> + drm_bridge_add(&dsi->bridge);
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static int nwl_dsi_host_detach(struct mipi_dsi_host *dsi_host,
>>>>> + struct mipi_dsi_device *device)
>>>>> +{
>>>>> + struct nwl_dsi *dsi = container_of(dsi_host, struct nwl_dsi, dsi_host);
>>>>> +
>>>>> + drm_of_panel_bridge_remove(dsi->dev->of_node, 1, 0);
>>>>> + drm_bridge_remove(&dsi->bridge);
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static bool nwl_dsi_read_packet(struct nwl_dsi *dsi, u32 status)
>>>>> +{
>>>>> + struct device *dev = dsi->dev;
>>>>> + struct nwl_dsi_transfer *xfer = dsi->xfer;
>>>>> + u8 *payload = xfer->msg->rx_buf;
>>>>> + u32 val;
>>>>> + u16 word_count;
>>>>> + u8 channel;
>>>>> + u8 data_type;
>>>>> +
>>>>> + xfer->status = 0;
>>>>> +
>>>>> + if (xfer->rx_word_count == 0) {
>>>>> + if (!(status & NWL_DSI_RX_PKT_HDR_RCVD))
>>>>> + return false;
>>>>> + /* Get the RX header and parse it */
>>>>> + val = nwl_dsi_read(dsi, NWL_DSI_RX_PKT_HEADER);
>>>>> + word_count = NWL_DSI_WC(val);
>>>>> + channel = NWL_DSI_RX_VC(val);
>>>>> + data_type = NWL_DSI_RX_DT(val);
>>>>> +
>>>>> + if (channel != xfer->msg->channel) {
>>>>> + DRM_DEV_ERROR(dev,
>>>>> + "[%02X] Channel mismatch (%u != %u)\n",
>>>>> + xfer->cmd, channel, xfer->msg->channel);
>>>>> + return true;
>>>>> + }
>>>>> +
>>>>> + switch (data_type) {
>>>>> + case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE:
>>>>> + /* Fall through */
>>>>> + case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE:
>>>>> + if (xfer->msg->rx_len > 1) {
>>>>> + /* read second byte */
>>>>> + payload[1] = word_count >> 8;
>>>>> + ++xfer->rx_len;
>>>>> + }
>>>>> + /* Fall through */
>>>>> + case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE:
>>>>> + /* Fall through */
>>>>> + case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE:
>>>>> + if (xfer->msg->rx_len > 0) {
>>>>> + /* read first byte */
>>>>> + payload[0] = word_count & 0xff;
>>>>> + ++xfer->rx_len;
>>>>> + }
>>>>> + xfer->status = xfer->rx_len;
>>>>> + return true;
>>>>> + case MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT:
>>>>> + word_count &= 0xff;
>>>>> + DRM_DEV_ERROR(dev, "[%02X] DSI error report: 0x%02x\n",
>>>>> + xfer->cmd, word_count);
>>>>> + xfer->status = -EPROTO;
>>>>> + return true;
>>>>> + }
>>>>> +
>>>>> + if (word_count > xfer->msg->rx_len) {
>>>>> + DRM_DEV_ERROR(
>>>>> + dev,
>>>>> + "[%02X] Receive buffer too small: %zu (< %u)\n",
>>>>> + xfer->cmd, xfer->msg->rx_len, word_count);
>>>>> + return true;
>>>>> + }
>>>>> +
>>>>> + xfer->rx_word_count = word_count;
>>>>> + } else {
>>>>> + /* Set word_count from previous header read */
>>>>> + word_count = xfer->rx_word_count;
>>>>> + }
>>>>> +
>>>>> + /* If RX payload is not yet received, wait for it */
>>>>> + if (!(status & NWL_DSI_RX_PKT_PAYLOAD_DATA_RCVD))
>>>>> + return false;
>>>>> +
>>>>> + /* Read the RX payload */
>>>>> + while (word_count >= 4) {
>>>>> + val = nwl_dsi_read(dsi, NWL_DSI_RX_PAYLOAD);
>>>>> + payload[0] = (val >> 0) & 0xff;
>>>>> + payload[1] = (val >> 8) & 0xff;
>>>>> + payload[2] = (val >> 16) & 0xff;
>>>>> + payload[3] = (val >> 24) & 0xff;
>>>>> + payload += 4;
>>>>> + xfer->rx_len += 4;
>>>>> + word_count -= 4;
>>>>> + }
>>>>> +
>>>>> + if (word_count > 0) {
>>>>> + val = nwl_dsi_read(dsi, NWL_DSI_RX_PAYLOAD);
>>>>> + switch (word_count) {
>>>>> + case 3:
>>>>> + payload[2] = (val >> 16) & 0xff;
>>>>> + ++xfer->rx_len;
>>>>> + /* Fall through */
>>>>> + case 2:
>>>>> + payload[1] = (val >> 8) & 0xff;
>>>>> + ++xfer->rx_len;
>>>>> + /* Fall through */
>>>>> + case 1:
>>>>> + payload[0] = (val >> 0) & 0xff;
>>>>> + ++xfer->rx_len;
>>>>> + break;
>>>>> + }
>>>>> + }
>>>>> +
>>>>> + xfer->status = xfer->rx_len;
>>>>> +
>>>>> + return true;
>>>>> +}
>>>>> +
>>>>> +static void nwl_dsi_finish_transmission(struct nwl_dsi *dsi, u32 status)
>>>>> +{
>>>>> + struct nwl_dsi_transfer *xfer = dsi->xfer;
>>>>> + bool end_packet = false;
>>>>> +
>>>>> + if (!xfer)
>>>>> + return;
>>>>> +
>>>>> + if (xfer->direction == DSI_PACKET_SEND &&
>>>>> + status & NWL_DSI_TX_PKT_DONE) {
>>>>> + xfer->status = xfer->tx_len;
>>>>> + end_packet = true;
>>>>> + } else if (status & NWL_DSI_DPHY_DIRECTION &&
>>>>> + ((status & (NWL_DSI_RX_PKT_HDR_RCVD |
>>>>> + NWL_DSI_RX_PKT_PAYLOAD_DATA_RCVD)))) {
>>>>> + end_packet = nwl_dsi_read_packet(dsi, status);
>>>>> + }
>>>>> +
>>>>> + if (end_packet)
>>>>> + complete(&xfer->completed);
>>>>> +}
>>>>> +
>>>>> +static void nwl_dsi_begin_transmission(struct nwl_dsi *dsi)
>>>>> +{
>>>>> + struct nwl_dsi_transfer *xfer = dsi->xfer;
>>>>> + struct mipi_dsi_packet *pkt = &xfer->packet;
>>>>> + const u8 *payload;
>>>>> + size_t length;
>>>>> + u16 word_count;
>>>>> + u8 hs_mode;
>>>>> + u32 val;
>>>>> + u32 hs_workaround = 0;
>>>>> +
>>>>> + /* Send the payload, if any */
>>>>> + length = pkt->payload_length;
>>>>> + payload = pkt->payload;
>>>>> +
>>>>> + while (length >= 4) {
>>>>> + val = *(u32 *)payload;
>>>>> + hs_workaround |= !(val & 0xFFFF00);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_TX_PAYLOAD, val);
>>>>> + payload += 4;
>>>>> + length -= 4;
>>>>> + }
>>>>> + /* Send the rest of the payload */
>>>>> + val = 0;
>>>>> + switch (length) {
>>>>> + case 3:
>>>>> + val |= payload[2] << 16;
>>>>> + /* Fall through */
>>>>> + case 2:
>>>>> + val |= payload[1] << 8;
>>>>> + hs_workaround |= !(val & 0xFFFF00);
>>>>> + /* Fall through */
>>>>> + case 1:
>>>>> + val |= payload[0];
>>>>> + nwl_dsi_write(dsi, NWL_DSI_TX_PAYLOAD, val);
>>>>> + break;
>>>>> + }
>>>>> + xfer->tx_len = pkt->payload_length;
>>>>> +
>>>>> + /*
>>>>> + * Send the header
>>>>> + * header[0] = Virtual Channel + Data Type
>>>>> + * header[1] = Word Count LSB (LP) or first param (SP)
>>>>> + * header[2] = Word Count MSB (LP) or second param (SP)
>>>>> + */
>>>>> + word_count = pkt->header[1] | (pkt->header[2] << 8);
>>>>> + if (hs_workaround && (dsi->quirks & E11418_HS_MODE_QUIRK)) {
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev,
>>>>> + "Using hs mode workaround for cmd 0x%x\n",
>>>>> + xfer->cmd);
>>>>> + hs_mode = 1;
>>>>> + } else {
>>>>> + hs_mode = (xfer->msg->flags & MIPI_DSI_MSG_USE_LPM) ? 0 : 1;
>>>>> + }
>>>>> + val = NWL_DSI_WC(word_count) | NWL_DSI_TX_VC(xfer->msg->channel) |
>>>>> + NWL_DSI_TX_DT(xfer->msg->type) | NWL_DSI_HS_SEL(hs_mode) |
>>>>> + NWL_DSI_BTA_TX(xfer->need_bta);
>>>>> + nwl_dsi_write(dsi, NWL_DSI_PKT_CONTROL, val);
>>>>> +
>>>>> + /* Send packet command */
>>>>> + nwl_dsi_write(dsi, NWL_DSI_SEND_PACKET, 0x1);
>>>>> +}
>>>>> +
>>>>> +static ssize_t nwl_dsi_host_transfer(struct mipi_dsi_host *dsi_host,
>>>>> + const struct mipi_dsi_msg *msg)
>>>>> +{
>>>>> + struct nwl_dsi *dsi = container_of(dsi_host, struct nwl_dsi, dsi_host);
>>>>> + struct nwl_dsi_transfer xfer;
>>>>> + ssize_t ret = 0;
>>>>> +
>>>>> + /* Create packet to be sent */
>>>>> + dsi->xfer = &xfer;
>>>>> + ret = mipi_dsi_create_packet(&xfer.packet, msg);
>>>>> + if (ret < 0) {
>>>>> + dsi->xfer = NULL;
>>>>> + return ret;
>>>>> + }
>>>>> +
>>>>> + if ((msg->type & MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM ||
>>>>> + msg->type & MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM ||
>>>>> + msg->type & MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM ||
>>>>> + msg->type & MIPI_DSI_DCS_READ) &&
>>>>> + msg->rx_len > 0 && msg->rx_buf != NULL)
>>>>> + xfer.direction = DSI_PACKET_RECEIVE;
>>>>> + else
>>>>> + xfer.direction = DSI_PACKET_SEND;
>>>>> +
>>>>> + xfer.need_bta = (xfer.direction == DSI_PACKET_RECEIVE);
>>>>> + xfer.need_bta |= (msg->flags & MIPI_DSI_MSG_REQ_ACK) ? 1 : 0;
>>>>> + xfer.msg = msg;
>>>>> + xfer.status = -ETIMEDOUT;
>>>>> + xfer.rx_word_count = 0;
>>>>> + xfer.rx_len = 0;
>>>>> + xfer.cmd = 0x00;
>>>>> + if (msg->tx_len > 0)
>>>>> + xfer.cmd = ((u8 *)(msg->tx_buf))[0];
>>>>> + init_completion(&xfer.completed);
>>>>> +
>>>>> + ret = clk_prepare_enable(dsi->rx_esc_clk);
>>>>> + if (ret < 0) {
>>>>> + DRM_DEV_ERROR(dsi->dev, "Failed to enable rx_esc clk: %zd\n",
>>>>> + ret);
>>>>> + return ret;
>>>>> + }
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev, "Enabled rx_esc clk @%lu Hz\n",
>>>>> + clk_get_rate(dsi->rx_esc_clk));
>>>>> +
>>>>> + /* Initiate the DSI packet transmision */
>>>>> + nwl_dsi_begin_transmission(dsi);
>>>>> +
>>>>> + if (!wait_for_completion_timeout(&xfer.completed,
>>>>> + NWL_DSI_MIPI_FIFO_TIMEOUT)) {
>>>>> + DRM_DEV_ERROR(dsi_host->dev, "[%02X] DSI transfer timed out\n",
>>>>> + xfer.cmd);
>>>>> + ret = -ETIMEDOUT;
>>>>> + } else {
>>>>> + ret = xfer.status;
>>>>> + }
>>>>> +
>>>>> + clk_disable_unprepare(dsi->rx_esc_clk);
>>>>> +
>>>>> + return ret;
>>>>> +}
>>>>> +
>>>>> +const struct mipi_dsi_host_ops nwl_dsi_host_ops = {
>>>>> + .attach = nwl_dsi_host_attach,
>>>>> + .detach = nwl_dsi_host_detach,
>>>>> + .transfer = nwl_dsi_host_transfer,
>>>>> +};
>>>>> +
>>>>> +irqreturn_t nwl_dsi_irq_handler(int irq, void *data)
>>>>> +{
>>>>> + u32 irq_status;
>>>>> + struct nwl_dsi *dsi = data;
>>>>> +
>>>>> + irq_status = nwl_dsi_read(dsi, NWL_DSI_IRQ_STATUS);
>>>>> +
>>>>> + if (irq_status & NWL_DSI_TX_FIFO_OVFLW)
>>>>> + DRM_DEV_ERROR_RATELIMITED(dsi->dev, "tx fifo overflow\n");
>>>>> +
>>>>> + if (irq_status & NWL_DSI_HS_TX_TIMEOUT)
>>>>> + DRM_DEV_ERROR_RATELIMITED(dsi->dev, "HS tx timeout\n");
>>>>> +
>>>>> + if (irq_status & NWL_DSI_TX_PKT_DONE ||
>>>>> + irq_status & NWL_DSI_RX_PKT_HDR_RCVD ||
>>>>> + irq_status & NWL_DSI_RX_PKT_PAYLOAD_DATA_RCVD)
>>>>> + nwl_dsi_finish_transmission(dsi, irq_status);
>>>>> +
>>>>> + return IRQ_HANDLED;
>>>>> +}
>>>>> +
>>>>> +int nwl_dsi_enable(struct nwl_dsi *dsi)
>>>>> +{
>>>>> + struct device *dev = dsi->dev;
>>>>> + union phy_configure_opts *phy_cfg = &dsi->phy_cfg;
>>>>> + int ret;
>>>>> +
>>>>> + if (!dsi->lanes) {
>>>>> + DRM_DEV_ERROR(dev, "Need DSI lanes: %d\n", dsi->lanes);
>>>>> + return -EINVAL;
>>>>> + }
>>>>> +
>>>>> + ret = phy_init(dsi->phy);
>>>>> + if (ret < 0) {
>>>>> + DRM_DEV_ERROR(dev, "Failed to init DSI phy: %d\n", ret);
>>>>> + return ret;
>>>>> + }
>>>>> +
>>>>> + ret = phy_configure(dsi->phy, phy_cfg);
>>>>> + if (ret < 0) {
>>>>> + DRM_DEV_ERROR(dev, "Failed to configure DSI phy: %d\n", ret);
>>>>> + return ret;
>>>>> + }
>>>>> +
>>>>> + ret = clk_prepare_enable(dsi->tx_esc_clk);
>>>>> + if (ret < 0) {
>>>>> + DRM_DEV_ERROR(dsi->dev, "Failed to enable tx_esc clk: %d\n",
>>>>> + ret);
>>>>> + return ret;
>>>>> + }
>>>>> + DRM_DEV_DEBUG_DRIVER(dsi->dev, "Enabled tx_esc clk @%lu Hz\n",
>>>>> + clk_get_rate(dsi->tx_esc_clk));
>>>>> +
>>>>> + ret = nwl_dsi_config_host(dsi);
>>>>> + if (ret < 0) {
>>>>> + DRM_DEV_ERROR(dev, "Failed to set up DSI: %d", ret);
>>>>> + return ret;
>>>>> + }
>>>>> +
>>>>> + ret = nwl_dsi_config_dpi(dsi);
>>>>> + if (ret < 0) {
>>>>> + DRM_DEV_ERROR(dev, "Failed to set up DPI: %d", ret);
>>>>> + return ret;
>>>>> + }
>>>>> +
>>>>> + ret = phy_power_on(dsi->phy);
>>>>> + if (ret < 0) {
>>>>> + DRM_DEV_ERROR(dev, "Failed to power on DPHY (%d)\n", ret);
>>>>> + return ret;
>>>>> + }
>>>>> +
>>>>> + nwl_dsi_init_interrupts(dsi);
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +int nwl_dsi_disable(struct nwl_dsi *dsi)
>>>>> +{
>>>>> + struct device *dev = dsi->dev;
>>>>> +
>>>>> + DRM_DEV_DEBUG_DRIVER(dev, "Disabling clocks and phy\n");
>>>>> +
>>>>> + phy_power_off(dsi->phy);
>>>>> + phy_exit(dsi->phy);
>>>>> +
>>>>> + /* Disabling the clock before the phy breaks enabling dsi again */
>>>>> + clk_disable_unprepare(dsi->tx_esc_clk);
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> diff --git a/drivers/gpu/drm/bridge/nwl-dsi/nwl-dsi.h b/drivers/gpu/drm/bridge/nwl-dsi/nwl-dsi.h
>>>>> new file mode 100644
>>>>> index 000000000000..579b366de652
>>>>> --- /dev/null
>>>>> +++ b/drivers/gpu/drm/bridge/nwl-dsi/nwl-dsi.h
>>>>> @@ -0,0 +1,112 @@
>>>>> +/* SPDX-License-Identifier: GPL-2.0+ */
>>>>> +/*
>>>>> + * NWL MIPI DSI host driver
>>>>> + *
>>>>> + * Copyright (C) 2017 NXP
>>>>> + * Copyright (C) 2019 Purism SPC
>>>>> + */
>>>>> +#ifndef __NWL_DSI_H__
>>>>> +#define __NWL_DSI_H__
>>>>> +
>>>>> +#include <linux/irqreturn.h>
>>>>> +
>>>>> +#include <drm/drm_mipi_dsi.h>
>>>>> +
>>>>> +#include "nwl-drv.h"
>>>>> +
>>>>> +/* DSI HOST registers */
>>>>> +#define NWL_DSI_CFG_NUM_LANES 0x0
>>>>> +#define NWL_DSI_CFG_NONCONTINUOUS_CLK 0x4
>>>>> +#define NWL_DSI_CFG_T_PRE 0x8
>>>>> +#define NWL_DSI_CFG_T_POST 0xc
>>>>> +#define NWL_DSI_CFG_TX_GAP 0x10
>>>>> +#define NWL_DSI_CFG_AUTOINSERT_EOTP 0x14
>>>>> +#define NWL_DSI_CFG_EXTRA_CMDS_AFTER_EOTP 0x18
>>>>> +#define NWL_DSI_CFG_HTX_TO_COUNT 0x1c
>>>>> +#define NWL_DSI_CFG_LRX_H_TO_COUNT 0x20
>>>>> +#define NWL_DSI_CFG_BTA_H_TO_COUNT 0x24
>>>>> +#define NWL_DSI_CFG_TWAKEUP 0x28
>>>>> +#define NWL_DSI_CFG_STATUS_OUT 0x2c
>>>>> +#define NWL_DSI_RX_ERROR_STATUS 0x30
>>>>> +
>>>>> +/* DSI DPI registers */
>>>>> +#define NWL_DSI_PIXEL_PAYLOAD_SIZE 0x200
>>>>> +#define NWL_DSI_PIXEL_FIFO_SEND_LEVEL 0x204
>>>>> +#define NWL_DSI_INTERFACE_COLOR_CODING 0x208
>>>>> +#define NWL_DSI_PIXEL_FORMAT 0x20c
>>>>> +#define NWL_DSI_VSYNC_POLARITY 0x210
>>>>> +#define NWL_DSI_VSYNC_POLARITY_ACTIVE_LOW 0
>>>>> +#define NWL_DSI_VSYNC_POLARITY_ACTIVE_HIGH BIT(1)
>>>>> +
>>>>> +#define NWL_DSI_HSYNC_POLARITY 0x214
>>>>> +#define NWL_DSI_HSYNC_POLARITY_ACTIVE_LOW 0
>>>>> +#define NWL_DSI_HSYNC_POLARITY_ACTIVE_HIGH BIT(1)
>>>>> +
>>>>> +#define NWL_DSI_VIDEO_MODE 0x218
>>>>> +#define NWL_DSI_HFP 0x21c
>>>>> +#define NWL_DSI_HBP 0x220
>>>>> +#define NWL_DSI_HSA 0x224
>>>>> +#define NWL_DSI_ENABLE_MULT_PKTS 0x228
>>>>> +#define NWL_DSI_VBP 0x22c
>>>>> +#define NWL_DSI_VFP 0x230
>>>>> +#define NWL_DSI_BLLP_MODE 0x234
>>>>> +#define NWL_DSI_USE_NULL_PKT_BLLP 0x238
>>>>> +#define NWL_DSI_VACTIVE 0x23c
>>>>> +#define NWL_DSI_VC 0x240
>>>>> +
>>>>> +/* DSI APB PKT control */
>>>>> +#define NWL_DSI_TX_PAYLOAD 0x280
>>>>> +#define NWL_DSI_PKT_CONTROL 0x284
>>>>> +#define NWL_DSI_SEND_PACKET 0x288
>>>>> +#define NWL_DSI_PKT_STATUS 0x28c
>>>>> +#define NWL_DSI_PKT_FIFO_WR_LEVEL 0x290
>>>>> +#define NWL_DSI_PKT_FIFO_RD_LEVEL 0x294
>>>>> +#define NWL_DSI_RX_PAYLOAD 0x298
>>>>> +#define NWL_DSI_RX_PKT_HEADER 0x29c
>>>>> +
>>>>> +/* DSI IRQ handling */
>>>>> +#define NWL_DSI_IRQ_STATUS 0x2a0
>>>>> +#define NWL_DSI_SM_NOT_IDLE BIT(0)
>>>>> +#define NWL_DSI_TX_PKT_DONE BIT(1)
>>>>> +#define NWL_DSI_DPHY_DIRECTION BIT(2)
>>>>> +#define NWL_DSI_TX_FIFO_OVFLW BIT(3)
>>>>> +#define NWL_DSI_TX_FIFO_UDFLW BIT(4)
>>>>> +#define NWL_DSI_RX_FIFO_OVFLW BIT(5)
>>>>> +#define NWL_DSI_RX_FIFO_UDFLW BIT(6)
>>>>> +#define NWL_DSI_RX_PKT_HDR_RCVD BIT(7)
>>>>> +#define NWL_DSI_RX_PKT_PAYLOAD_DATA_RCVD BIT(8)
>>>>> +#define NWL_DSI_BTA_TIMEOUT BIT(29)
>>>>> +#define NWL_DSI_LP_RX_TIMEOUT BIT(30)
>>>>> +#define NWL_DSI_HS_TX_TIMEOUT BIT(31)
>>>>> +
>>>>> +#define NWL_DSI_IRQ_STATUS2 0x2a4
>>>>> +#define NWL_DSI_SINGLE_BIT_ECC_ERR BIT(0)
>>>>> +#define NWL_DSI_MULTI_BIT_ECC_ERR BIT(1)
>>>>> +#define NWL_DSI_CRC_ERR BIT(2)
>>>>> +
>>>>> +#define NWL_DSI_IRQ_MASK 0x2a8
>>>>> +#define NWL_DSI_SM_NOT_IDLE_MASK BIT(0)
>>>>> +#define NWL_DSI_TX_PKT_DONE_MASK BIT(1)
>>>>> +#define NWL_DSI_DPHY_DIRECTION_MASK BIT(2)
>>>>> +#define NWL_DSI_TX_FIFO_OVFLW_MASK BIT(3)
>>>>> +#define NWL_DSI_TX_FIFO_UDFLW_MASK BIT(4)
>>>>> +#define NWL_DSI_RX_FIFO_OVFLW_MASK BIT(5)
>>>>> +#define NWL_DSI_RX_FIFO_UDFLW_MASK BIT(6)
>>>>> +#define NWL_DSI_RX_PKT_HDR_RCVD_MASK BIT(7)
>>>>> +#define NWL_DSI_RX_PKT_PAYLOAD_DATA_RCVD_MASK BIT(8)
>>>>> +#define NWL_DSI_BTA_TIMEOUT_MASK BIT(29)
>>>>> +#define NWL_DSI_LP_RX_TIMEOUT_MASK BIT(30)
>>>>> +#define NWL_DSI_HS_TX_TIMEOUT_MASK BIT(31)
>>>>> +
>>>>> +#define NWL_DSI_IRQ_MASK2 0x2ac
>>>>> +#define NWL_DSI_SINGLE_BIT_ECC_ERR_MASK BIT(0)
>>>>> +#define NWL_DSI_MULTI_BIT_ECC_ERR_MASK BIT(1)
>>>>> +#define NWL_DSI_CRC_ERR_MASK BIT(2)
>>>>> +
>>>>> +extern const struct mipi_dsi_host_ops nwl_dsi_host_ops;
>>>>> +
>>>>> +irqreturn_t nwl_dsi_irq_handler(int irq, void *data);
>>>>> +int nwl_dsi_enable(struct nwl_dsi *dsi);
>>>>> +int nwl_dsi_disable(struct nwl_dsi *dsi);
>>>>> +
>>>>> +#endif /* __NWL_DSI_H__ */
>
More information about the dri-devel
mailing list