[Bug 110674] Crashes / Resets From AMDGPU / Radeon VII

bugzilla-daemon at freedesktop.org bugzilla-daemon at freedesktop.org
Sat Sep 21 15:02:08 UTC 2019


https://bugs.freedesktop.org/show_bug.cgi?id=110674

--- Comment #129 from Tom B <tom at r.je> ---
Thank you Alex! That has fixed it! The card is now correctly setting its
voltages and clocks. I applied the patch to 5.3.1

However, I've noticed a few very minor problems that are probably worth
reporting.

1. I still get this in dmesg:


[    6.307005] amdgpu: [powerplay] Failed to send message 0x28, response 0x0
[    6.307006] amdgpu: [powerplay] [SetHardMinFreq] Set hard min uclk failed!
[    9.225192] amdgpu 0000:44:00.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR*
IB test failed on sdma0 (-110).
[   10.238621] amdgpu 0000:44:00.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR*
IB test failed on page0 (-110).
[   10.532004] amdgpu: [powerplay] Failed to send message 0x26, response 0x0
[   10.532005] amdgpu: [powerplay] Failed to set soft min gfxclk !
[   10.532006] amdgpu: [powerplay] Failed to upload DPM Bootup Levels!


Though this doesn't really matter, we were focussing our issue there earlier in
the thread as it looked like `Set hard min uclk failed!` was the cause of the
problem, obviously it isn't.

2. This repeats indefinitely in dmesg:

[  332.575747] [drm] schedsdma0 is not ready, skipping
[  332.582657] [drm] schedsdma0 is not ready, skipping
[  332.582864] [drm] schedsdma0 is not ready, skipping
[  332.708848] [drm] schedsdma0 is not ready, skipping
[  332.715975] [drm] schedsdma0 is not ready, skipping
[  332.716229] [drm] schedsdma0 is not ready, skipping
[  332.756987] [drm] schedsdma0 is not ready, skipping
[  332.763970] [drm] schedsdma0 is not ready, skipping
[  332.764169] [drm] schedsdma0 is not ready, skipping


As you can see several dozens of times second this gets written to dmesg. This
might be because the patches are intended to be used on 5.4?

3. The lowest wattage now seems to be 33w rather than 23w which means increased
idle power usage and temps. This isn't really a problem but I thought it was
worth mentioning and is a fair tradeoff for stability.

-- 
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20190921/c93bf78f/attachment-0001.html>


More information about the dri-devel mailing list