[PATCH 1/3] drm/panel: simple: Add Logic PD Type 28 display support

Sam Ravnborg sam at ravnborg.org
Sat Sep 21 19:07:42 UTC 2019


Hi Adam.

On Tue, Sep 17, 2019 at 11:12:11AM -0500, Adam Ford wrote:
> Previously, there was an omap panel-dpi driver that would
> read generic timings from the device tree and set the display
> timing accordingly.  This driver was removed so the screen
> no longer functions.  This patch modifies the panel-simple
> file to setup the timings to the same values previously used.
> 
> Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver")
> 
> Signed-off-by: Adam Ford <aford173 at gmail.com>

Patch looks good.
Reviewed-by: Sam Ravnborg <sam at ravnborg.org>
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 5a93c4edf1e4..c86c30f3a8a1 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -1900,6 +1900,40 @@ static const struct drm_display_mode mitsubishi_aa070mc01_mode = {
>  	.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
>  };
>  
> +static const struct drm_display_mode logicpd_type_28_mode = {
> +	.clock = 9000,
> +	.hdisplay = 480,
> +	.hsync_start = 480 + 3,
> +	.hsync_end = 480 + 3 + 42,
> +	.htotal = 480 + 3 + 42 + 2,
> +
> +	.vdisplay = 272,
> +	.vsync_start = 272 + 2,
> +	.vsync_end = 272 + 2 + 11,
> +	.vtotal = 272 + 2 + 11 + 3,
> +	.vrefresh = 60,
> +	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
> +};
> +
> +static const struct panel_desc logicpd_type_28 = {
> +	.modes = &logicpd_type_28_mode,
> +	.num_modes = 1,
> +	.bpc = 8,
> +	.size = {
> +		.width = 105,
> +		.height = 67,
> +	},
> +	.delay = {
> +		.prepare = 200,
> +		.enable = 200,
> +		.unprepare = 200,
> +		.disable = 200,
> +	},
> +	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> +	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE |
> +		     DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE,
> +};
> +
>  static const struct panel_desc mitsubishi_aa070mc01 = {
>  	.modes = &mitsubishi_aa070mc01_mode,
>  	.num_modes = 1,
> @@ -2948,6 +2982,9 @@ static const struct of_device_id platform_of_match[] = {
>  	}, {
>  		.compatible = "lg,lp129qe",
>  		.data = &lg_lp129qe,
> +	}, {
> +		.compatible = "logicpd,type28",
> +		.data = &logicpd_type_28,
>  	}, {
>  		.compatible = "mitsubishi,aa070mc01-ca1",
>  		.data = &mitsubishi_aa070mc01,
> -- 
> 2.17.1


More information about the dri-devel mailing list