[PATCH] drm/panel: samsung: s6e8aa0: Add backlight control support
Joonas Kylmälä
joonas.kylmala at iki.fi
Sat Sep 21 12:48:43 UTC 2019
This makes the backlight brightness controllable from the
userspace.
Signed-off-by: Joonas Kylmälä <joonas.kylmala at iki.fi>
---
drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c | 82 ++++++++++++++++++++-------
1 file changed, 60 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c b/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c
index dbced6501204..aa75934f5bed 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c
@@ -10,8 +10,12 @@
* Eunchul Kim <chulspro.kim at samsung.com>
* Tomasz Figa <t.figa at samsung.com>
* Andrzej Hajda <a.hajda at samsung.com>
+ *
+ * Derived from panel-samsung-s6e63m0.c:
+ * Copyright (C) 2019 Paweł Chmiel <pawel.mikolaj.chmiel at gmail.com>
*/
+#include <linux/backlight.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
@@ -85,6 +89,8 @@
#define AID_2 (0x6)
#define AID_3 (0x7)
+#define MAX_BRIGHTNESS (GAMMA_LEVEL_NUM - 1)
+
typedef u8 s6e8aa0_gamma_table[GAMMA_TABLE_LEN];
struct s6e8aa0_variant {
@@ -95,6 +101,7 @@ struct s6e8aa0_variant {
struct s6e8aa0 {
struct device *dev;
struct drm_panel panel;
+ struct backlight_device *bl_dev;
struct regulator_bulk_data supplies[2];
struct gpio_desc *reset_gpio;
@@ -110,7 +117,6 @@ struct s6e8aa0 {
u8 version;
u8 id;
const struct s6e8aa0_variant *variant;
- int brightness;
/* This field is tested by functions directly accessing DSI bus before
* transfer, transfer is skipped if it is set. In case of transfer
@@ -321,9 +327,10 @@ static void s6e8aa0_etc_elvss_control(struct s6e8aa0 *ctx)
static void s6e8aa0_elvss_nvm_set_v142(struct s6e8aa0 *ctx)
{
+ struct backlight_device *bd = ctx->bl_dev;
u8 br;
- switch (ctx->brightness) {
+ switch (bd->props.brightness) {
case 0 ... 6: /* 30cd ~ 100cd */
br = 0xdf;
break;
@@ -762,24 +769,6 @@ static const struct s6e8aa0_variant s6e8aa0_variants[] = {
}
};
-static void s6e8aa0_brightness_set(struct s6e8aa0 *ctx)
-{
- const u8 *gamma;
-
- if (ctx->error)
- return;
-
- gamma = ctx->variant->gamma_tables[ctx->brightness];
-
- if (ctx->version >= 142)
- s6e8aa0_elvss_nvm_set(ctx);
-
- s6e8aa0_dcs_write(ctx, gamma, GAMMA_TABLE_LEN);
-
- /* update gamma table. */
- s6e8aa0_dcs_write_seq_static(ctx, 0xf7, 0x03);
-}
-
static void s6e8aa0_panel_init(struct s6e8aa0 *ctx)
{
s6e8aa0_apply_level_1_key(ctx);
@@ -791,7 +780,7 @@ static void s6e8aa0_panel_init(struct s6e8aa0 *ctx)
s6e8aa0_panel_cond_set(ctx);
s6e8aa0_display_condition_set(ctx);
- s6e8aa0_brightness_set(ctx);
+ backlight_enable(ctx->bl_dev);
s6e8aa0_etc_source_control(ctx);
s6e8aa0_etc_pentile_control(ctx);
s6e8aa0_elvss_nvm_set(ctx);
@@ -974,6 +963,53 @@ static int s6e8aa0_parse_dt(struct s6e8aa0 *ctx)
return 0;
}
+static int s6e8aa0_set_brightness(struct backlight_device *bd)
+{
+ struct s6e8aa0 *ctx = bl_get_data(bd);
+ const u8 *gamma;
+
+ if (ctx->error)
+ return;
+
+ gamma = ctx->variant->gamma_tables[bd->props.brightness];
+
+ if (ctx->version >= 142)
+ s6e8aa0_elvss_nvm_set(ctx);
+
+ s6e8aa0_dcs_write(ctx, gamma, GAMMA_TABLE_LEN);
+
+ /* update gamma table. */
+ s6e8aa0_dcs_write_seq_static(ctx, 0xf7, 0x03);
+
+ return s6e8aa0_clear_error(ctx);
+}
+
+static const struct backlight_ops s6e8aa0_backlight_ops = {
+ .update_status = s6e8aa0_set_brightness,
+};
+
+static int s6e8aa0_backlight_register(struct s6e8aa0 *ctx)
+{
+ struct backlight_properties props = {
+ .type = BACKLIGHT_RAW,
+ .brightness = MAX_BRIGHTNESS,
+ .max_brightness = MAX_BRIGHTNESS
+ };
+ struct device *dev = ctx->dev;
+ int ret = 0;
+
+ ctx->bl_dev = devm_backlight_device_register(dev, "panel", dev, ctx,
+ &s6e8aa0_backlight_ops,
+ &props);
+ if (IS_ERR(ctx->bl_dev)) {
+ ret = PTR_ERR(ctx->bl_dev);
+ DRM_DEV_ERROR(dev, "error registering backlight device (%d)\n",
+ ret);
+ }
+
+ return ret;
+}
+
static int s6e8aa0_probe(struct mipi_dsi_device *dsi)
{
struct device *dev = &dsi->dev;
@@ -1015,7 +1051,9 @@ static int s6e8aa0_probe(struct mipi_dsi_device *dsi)
return PTR_ERR(ctx->reset_gpio);
}
- ctx->brightness = GAMMA_LEVEL_NUM - 1;
+ ret = s6e8aa0_backlight_register(ctx);
+ if (ret < 0)
+ return ret;
drm_panel_init(&ctx->panel, dev, &s6e8aa0_drm_funcs,
DRM_MODE_CONNECTOR_DSI);
--
2.11.0
More information about the dri-devel
mailing list