[PATCH] drm/komeda: Adds output-color format/depth support
james qian wang (Arm Technology China)
james.qian.wang at arm.com
Tue Sep 24 02:13:27 UTC 2019
On Mon, Sep 23, 2019 at 12:16:12PM +0000, Brian Starkey wrote:
> Hi Lowry,
>
> On Fri, Sep 20, 2019 at 09:43:47AM +0000, Lowry Li (Arm Technology China) wrote:
> > From: "Lowry Li (Arm Technology China)" <Lowry.Li at arm.com>
> >
> > Sets color_depth according to connector->bpc.
> > Adds a new optional DT attribute "color-format" to represent a
> > preferred color formats for a specific pipeline, and the select order
> > is:
> > YCRCB420 > YCRCB422 > YCRCB444 > RGB444
> > The color-format can be anyone of these 4 format, one color-format not
> > only represent one format, but also include the lower formats, like
> >
> > color-format preferred_color_formats
> > YCRCB420 YCRCB420 > YCRCB422 > YCRCB444 > RGB444
> > YCRCB422 YCRCB422 > YCRCB444 > RGB444
> > YCRCB444 YCRCB444 > RGB444
> > RGB444 RGB444
> >
> > Then the final color_format is calculated by 3 steps:
> > 1. calculate HW available formats.
> > avail_formats = connector_color_formats & improc->color_formats;
> > 2. filter out un-preferred format.
> > avail_formats &= preferred_color_formats;
> > 3. select the final format according to the preferred order.
> > color_format = BIT(__fls(aval_formats));
>
> Is there a specific use-case for the DT property for selecting color
> format?
Hi Brian:
Since one monitor can support mutiple color-formats, this DT property
supply a way for user to select a specific one from this supported
color-formats.
> I think in general the color format should be determined according to
> the rules in the CEA spec. There's also the drm_mode_is_420_only()
> helper we can use to determine if YCBCR420 must be used. For the cases
> where it's optional, I think we can default to RGB444.
Yes, This selection depends on the real connector supported_color-formats,
I think you misunderstand this DT, this DT color-format is not for
specifying a real output format. but a way or select order for how to
select the final output format from the mutiple color-formats of a connector.
Like the DT color-format is "YCRCR420", it indicates a select order:
YUV420 > YUV422 > YUV444 > RGB444
We use this order to select the final output-format.
> > Then the final color_format is calculated by 3 steps:
> > 1. calculate HW available formats.
> > avail_formats = connector_color_formats & improc->color_formats;
NOTE: this connector_color_formats is
drm_connector->display_info.color_formats.
> > 2. filter out un-preferred format.
> > avail_formats &= preferred_color_formats;
> > 3. select the final format according to the preferred order.
> > color_format = BIT(__fls(aval_formats));
__fls here is used for selecting as order.
>
> Thanks,
> -Brian
>
> >
> > Changes since v1:
> > Rebased to the drm-misc-next branch.
> >
> > Signed-off-by: Lowry Li (Arm Technology China) <lowry.li at arm.com>
> > ---
> > .../arm/display/komeda/d71/d71_component.c | 15 ++++++++-
> > .../gpu/drm/arm/display/komeda/komeda_crtc.c | 27 ++++++++++++++++
> > .../gpu/drm/arm/display/komeda/komeda_dev.c | 32 ++++++++++++++++++-
> > .../gpu/drm/arm/display/komeda/komeda_kms.h | 2 ++
> > .../drm/arm/display/komeda/komeda_pipeline.h | 3 ++
> > .../display/komeda/komeda_pipeline_state.c | 31 ++++++++++++++++++
> > .../arm/display/komeda/komeda_wb_connector.c | 5 +++
> > 7 files changed, 113 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
> > index c3d29c0b051b..7b374a3b911e 100644
> > --- a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
> > +++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
> > @@ -944,13 +944,26 @@ static void d71_improc_update(struct komeda_component *c,
> > {
> > struct komeda_improc_state *st = to_improc_st(state);
> > u32 __iomem *reg = c->reg;
> > - u32 index;
> > + u32 index, mask = 0, ctrl = 0;
> >
> > for_each_changed_input(state, index)
> > malidp_write32(reg, BLK_INPUT_ID0 + index * 4,
> > to_d71_input_id(state, index));
> >
> > malidp_write32(reg, BLK_SIZE, HV_SIZE(st->hsize, st->vsize));
> > + malidp_write32(reg, IPS_DEPTH, st->color_depth);
> > +
> > + mask |= IPS_CTRL_YUV | IPS_CTRL_CHD422 | IPS_CTRL_CHD420;
> > +
> > + /* config color format */
> > + if (st->color_format == DRM_COLOR_FORMAT_YCRCB420)
> > + ctrl |= IPS_CTRL_YUV | IPS_CTRL_CHD422 | IPS_CTRL_CHD420;
> > + else if (st->color_format == DRM_COLOR_FORMAT_YCRCB422)
> > + ctrl |= IPS_CTRL_YUV | IPS_CTRL_CHD422;
> > + else if (st->color_format == DRM_COLOR_FORMAT_YCRCB444)
> > + ctrl |= IPS_CTRL_YUV;
> > +
> > + malidp_write32_mask(reg, BLK_CONTROL, mask, ctrl);
> > }
> >
> > static void d71_improc_dump(struct komeda_component *c, struct seq_file *sf)
> > diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c b/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c
> > index 624d257da20f..38d5cb20e908 100644
> > --- a/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c
> > +++ b/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c
> > @@ -18,6 +18,33 @@
> > #include "komeda_dev.h"
> > #include "komeda_kms.h"
> >
> > +void komeda_crtc_get_color_config(struct drm_crtc_state *crtc_st,
> > + u32 *color_depths, u32 *color_formats)
> > +{
> > + struct drm_connector *conn;
> > + struct drm_connector_state *conn_st;
> > + u32 conn_color_formats = ~0u;
> > + int i, min_bpc = 31, conn_bpc = 0;
> > +
> > + for_each_new_connector_in_state(crtc_st->state, conn, conn_st, i) {
> > + if (conn_st->crtc != crtc_st->crtc)
> > + continue;
> > +
> > + conn_bpc = conn->display_info.bpc ? conn->display_info.bpc : 8;
> > + conn_color_formats &= conn->display_info.color_formats;
> > +
> > + if (conn_bpc < min_bpc)
> > + min_bpc = conn_bpc;
> > + }
> > +
> > + /* connector doesn't config any color_format, use RGB444 as default */
> > + if (conn_color_formats == 0)
> > + conn_color_formats = DRM_COLOR_FORMAT_RGB444;
> > +
> > + *color_depths = GENMASK(conn_bpc, 0);
> > + *color_formats = conn_color_formats;
> > +}
> > +
> > static void komeda_crtc_update_clock_ratio(struct komeda_crtc_state *kcrtc_st)
> > {
> > u64 pxlclk, aclk;
> > diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_dev.c b/drivers/gpu/drm/arm/display/komeda/komeda_dev.c
> > index 9cbcd56e54cd..bee4633cdd9f 100644
> > --- a/drivers/gpu/drm/arm/display/komeda/komeda_dev.c
> > +++ b/drivers/gpu/drm/arm/display/komeda/komeda_dev.c
> > @@ -113,12 +113,34 @@ static struct attribute_group komeda_sysfs_attr_group = {
> > .attrs = komeda_sysfs_entries,
> > };
> >
> > +static int to_color_format(const char *str)
> > +{
> > + int format;
> > +
> > + if (!strncmp(str, "RGB444", 7)) {
> > + format = DRM_COLOR_FORMAT_RGB444;
> > + } else if (!strncmp(str, "YCRCB444", 9)) {
> > + format = DRM_COLOR_FORMAT_YCRCB444;
> > + } else if (!strncmp(str, "YCRCB422", 9)) {
> > + format = DRM_COLOR_FORMAT_YCRCB422;
> > + } else if (!strncmp(str, "YCRCB420", 9)) {
> > + format = DRM_COLOR_FORMAT_YCRCB420;
> > + } else {
> > + DRM_WARN("invalid color_format: %s, please set it to RGB444, YCRCB444, YCRCB422 or YCRCB420\n",
> > + str);
> > + format = DRM_COLOR_FORMAT_RGB444;
> > + }
> > +
> > + return format;
> > +}
> > +
> > static int komeda_parse_pipe_dt(struct komeda_dev *mdev, struct device_node *np)
> > {
> > struct komeda_pipeline *pipe;
> > struct clk *clk;
> > u32 pipe_id;
> > - int ret = 0;
> > + int ret = 0, color_format;
> > + const char *str;
> >
> > ret = of_property_read_u32(np, "reg", &pipe_id);
> > if (ret != 0 || pipe_id >= mdev->n_pipelines)
> > @@ -133,6 +155,14 @@ static int komeda_parse_pipe_dt(struct komeda_dev *mdev, struct device_node *np)
> > }
> > pipe->pxlclk = clk;
> >
> > + /* fetch DT configured color-format, if not set, use RGB444 */
> > + if (!of_property_read_string(np, "color-format", &str))
> > + color_format = to_color_format(str);
> > + else
> > + color_format = DRM_COLOR_FORMAT_RGB444;
> > +
> > + pipe->improc->preferred_color_formats = (color_format << 1) - 1;
> > +
> > /* enum ports */
> > pipe->of_output_links[0] =
> > of_graph_get_remote_node(np, KOMEDA_OF_PORT_OUTPUT, 0);
> > diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_kms.h b/drivers/gpu/drm/arm/display/komeda/komeda_kms.h
> > index 45c498e15e7a..456f3c435719 100644
> > --- a/drivers/gpu/drm/arm/display/komeda/komeda_kms.h
> > +++ b/drivers/gpu/drm/arm/display/komeda/komeda_kms.h
> > @@ -166,6 +166,8 @@ static inline bool has_flip_h(u32 rot)
> > return !!(rotation & DRM_MODE_REFLECT_X);
> > }
> >
> > +void komeda_crtc_get_color_config(struct drm_crtc_state *crtc_st,
> > + u32 *color_depths, u32 *color_formats);
> > unsigned long komeda_crtc_get_aclk(struct komeda_crtc_state *kcrtc_st);
> >
> > int komeda_kms_setup_crtcs(struct komeda_kms_dev *kms, struct komeda_dev *mdev);
> > diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
> > index a7a84e66549d..910d279ae48d 100644
> > --- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
> > +++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
> > @@ -315,6 +315,8 @@ struct komeda_splitter_state {
> > struct komeda_improc {
> > struct komeda_component base;
> > u32 supported_color_formats; /* DRM_RGB/YUV444/YUV420*/
> > + /* the preferred order is from MSB to LSB YUV420 --> RGB444 */
> > + u32 preferred_color_formats;
> > u32 supported_color_depths; /* BIT(8) | BIT(10)*/
> > u8 supports_degamma : 1;
> > u8 supports_csc : 1;
> > @@ -323,6 +325,7 @@ struct komeda_improc {
> >
> > struct komeda_improc_state {
> > struct komeda_component_state base;
> > + u8 color_format, color_depth;
> > u16 hsize, vsize;
> > };
> >
> > diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
> > index ea26bc9c2d00..5526731f5a33 100644
> > --- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
> > +++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
> > @@ -743,6 +743,7 @@ komeda_improc_validate(struct komeda_improc *improc,
> > struct komeda_data_flow_cfg *dflow)
> > {
> > struct drm_crtc *crtc = kcrtc_st->base.crtc;
> > + struct drm_crtc_state *crtc_st = &kcrtc_st->base;
> > struct komeda_component_state *c_st;
> > struct komeda_improc_state *st;
> >
> > @@ -756,6 +757,36 @@ komeda_improc_validate(struct komeda_improc *improc,
> > st->hsize = dflow->in_w;
> > st->vsize = dflow->in_h;
> >
> > + if (drm_atomic_crtc_needs_modeset(crtc_st)) {
> > + u32 output_depths, output_formats;
> > + u32 avail_depths, avail_formats;
> > +
> > + komeda_crtc_get_color_config(crtc_st, &output_depths,
> > + &output_formats);
> > +
> > + avail_depths = output_depths & improc->supported_color_depths;
> > + if (avail_depths == 0) {
> > + DRM_DEBUG_ATOMIC("No available color depths, conn depths: 0x%x & display: 0x%x\n",
> > + output_depths,
> > + improc->supported_color_depths);
> > + return -EINVAL;
> > + }
> > +
> > + avail_formats = output_formats &
> > + improc->supported_color_formats &
> > + improc->preferred_color_formats;
> > + if (avail_formats == 0) {
> > + DRM_DEBUG_ATOMIC("No available color_formats, conn formats 0x%x & display: 0x%x & preferred: 0x%x\n",
> > + output_formats,
> > + improc->supported_color_formats,
> > + improc->preferred_color_formats);
> > + return -EINVAL;
> > + }
> > +
> > + st->color_depth = __fls(avail_depths);
> > + st->color_format = BIT(__fls(avail_formats));
> > + }
> > +
> > komeda_component_add_input(&st->base, &dflow->input, 0);
> > komeda_component_set_output(&dflow->input, &improc->base, 0);
> >
> > diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
> > index 617e1f7b8472..49e5469ba48e 100644
> > --- a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
> > +++ b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
> > @@ -142,6 +142,7 @@ static int komeda_wb_connector_add(struct komeda_kms_dev *kms,
> > struct komeda_dev *mdev = kms->base.dev_private;
> > struct komeda_wb_connector *kwb_conn;
> > struct drm_writeback_connector *wb_conn;
> > + struct drm_display_info *info;
> > u32 *formats, n_formats = 0;
> > int err;
> >
> > @@ -171,6 +172,10 @@ static int komeda_wb_connector_add(struct komeda_kms_dev *kms,
> >
> > drm_connector_helper_add(&wb_conn->base, &komeda_wb_conn_helper_funcs);
> >
> > + info = &kwb_conn->base.base.display_info;
> > + info->bpc = __fls(kcrtc->master->improc->supported_color_depths);
> > + info->color_formats = kcrtc->master->improc->supported_color_formats;
> > +
> > kcrtc->wb_conn = kwb_conn;
> >
> > return 0;
> > --
> > 2.17.1
> >
More information about the dri-devel
mailing list