[PATCH V2 6/8] mdev: introduce virtio device and its device ops
Michael S. Tsirkin
mst at redhat.com
Wed Sep 25 13:21:42 UTC 2019
On Wed, Sep 25, 2019 at 08:45:21PM +0800, Jason Wang wrote:
>
> On 2019/9/25 下午5:09, Tian, Kevin wrote:
> > > From: Jason Wang [mailto:jasowang at redhat.com]
> > > Sent: Tuesday, September 24, 2019 9:54 PM
> > >
> > > This patch implements basic support for mdev driver that supports
> > > virtio transport for kernel virtio driver.
> > >
> > > Signed-off-by: Jason Wang <jasowang at redhat.com>
> > > ---
> > > include/linux/mdev.h | 2 +
> > > include/linux/virtio_mdev.h | 145
> > > ++++++++++++++++++++++++++++++++++++
> > > 2 files changed, 147 insertions(+)
> > > create mode 100644 include/linux/virtio_mdev.h
> > >
> > > diff --git a/include/linux/mdev.h b/include/linux/mdev.h
> > > index 3414307311f1..73ac27b3b868 100644
> > > --- a/include/linux/mdev.h
> > > +++ b/include/linux/mdev.h
> > > @@ -126,6 +126,8 @@ struct mdev_device *mdev_from_dev(struct device
> > > *dev);
> > >
> > > enum {
> > > MDEV_ID_VFIO = 1,
> > > + MDEV_ID_VIRTIO = 2,
> > > + MDEV_ID_VHOST = 3,
> > > /* New entries must be added here */
> > > };
> > >
> > > diff --git a/include/linux/virtio_mdev.h b/include/linux/virtio_mdev.h
> > > new file mode 100644
> > > index 000000000000..d1a40a739266
> > > --- /dev/null
> > > +++ b/include/linux/virtio_mdev.h
> > > @@ -0,0 +1,145 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +/*
> > > + * Virtio mediated device driver
> > > + *
> > > + * Copyright 2019, Red Hat Corp.
> > > + * Author: Jason Wang <jasowang at redhat.com>
> > > + */
> > > +#ifndef _LINUX_VIRTIO_MDEV_H
> > > +#define _LINUX_VIRTIO_MDEV_H
> > > +
> > > +#include <linux/interrupt.h>
> > > +#include <linux/mdev.h>
> > > +#include <uapi/linux/vhost.h>
> > > +
> > > +#define VIRTIO_MDEV_DEVICE_API_STRING "virtio-mdev"
> > > +#define VIRTIO_MDEV_VERSION 0x1
> > Just be curious. is this version identical to virtio spec version that below
> > callbacks are created for, or just irrelevant?
>
>
> It could be a hint but basically it's a way for userspace driver
> compatibility. For kernel we don't need this.
>
>
> >
> > > +
> > > +struct virtio_mdev_callback {
> > > + irqreturn_t (*callback)(void *data);
> > > + void *private;
> > > +};
> > > +
> > > +/**
> > > + * struct vfio_mdev_device_ops - Structure to be registered for each
> > > + * mdev device to register the device to virtio-mdev module.
> > > + *
> > > + * @set_vq_address: Set the address of virtqueue
> > > + * @mdev: mediated device
> > > + * @idx: virtqueue index
> > > + * @desc_area: address of desc area
> > > + * @driver_area: address of driver area
> > > + * @device_area: address of device area
> > > + * Returns integer: success (0) or error (< 0)
> > > + * @set_vq_num: Set the size of virtqueue
> > > + * @mdev: mediated device
> > > + * @idx: virtqueue index
> > > + * @num: the size of virtqueue
> > > + * @kick_vq: Kick the virtqueue
> > > + * @mdev: mediated device
> > > + * @idx: virtqueue index
> > > + * @set_vq_cb: Set the interrut calback function for
> > > + * a virtqueue
> > > + * @mdev: mediated device
> > > + * @idx: virtqueue index
> > > + * @cb: virtio-mdev interrupt callback
> > > structure
> > > + * @set_vq_ready: Set ready status for a virtqueue
> > > + * @mdev: mediated device
> > > + * @idx: virtqueue index
> > > + * @ready: ready (true) not ready(false)
> > > + * @get_vq_ready: Get ready status for a virtqueue
> > > + * @mdev: mediated device
> > > + * @idx: virtqueue index
> > > + * Returns boolean: ready (true) or not (false)
> > > + * @set_vq_state: Set the state for a virtqueue
> > > + * @mdev: mediated device
> > > + * @idx: virtqueue index
> > > + * @state: virtqueue state (last_avail_idx)
> > > + * Returns integer: success (0) or error (< 0)
> > > + * @get_vq_state: Get the state for a virtqueue
> > > + * @mdev: mediated device
> > > + * @idx: virtqueue index
> > > + * Returns virtqueue state (last_avail_idx)
> > > + * @get_vq_align: Get the virtqueue align requirement
> > > + * for the device
> > > + * @mdev: mediated device
> > > + * Returns virtqueue algin requirement
> > > + * @get_features: Get virtio features supported by the device
> > > + * @mdev: mediated device
> > > + * Returns the features support by the
> > > + * device
> > > + * @get_features: Set virtio features supported by the driver
> > > + * @mdev: mediated device
> > > + * @features: feature support by the driver
> > > + * Returns integer: success (0) or error (< 0)
> > > + * @set_config_cb: Set the config interrupt callback
> > > + * @mdev: mediated device
> > > + * @cb: virtio-mdev interrupt callback
> > > structure
> > > + * @get_device_id: Get virtio device id
> > > + * @mdev: mediated device
> > > + * Returns u32: virtio device id
> > > + * @get_vendor_id: Get virtio vendor id
> > > + * @mdev: mediated device
> > > + * Returns u32: virtio vendor id
> > > + * @get_status: Get the device status
> > > + * @mdev: mediated device
> > > + * Returns u8: virtio device status
> > > + * @set_status: Set the device status
> > > + * @mdev: mediated device
> > > + * @status: virtio device status
> > > + * @get_config: Read from device specific confiugration
> > > space
> > configuration (and similar typos downward)
>
>
> Let me fix.
>
>
> >
> > > + * @mdev: mediated device
> > > + * @offset: offset from the beginning of
> > > + * configuration space
> > > + * @buf: buffer used to read to
> > > + * @len: the length to read from
> > > + * configration space
> > > + * @set_config: Write to device specific confiugration space
> > > + * @mdev: mediated device
> > > + * @offset: offset from the beginning of
> > > + * configuration space
> > > + * @buf: buffer used to write from
> > > + * @len: the length to write to
> > > + * configration space
> > > + * @get_version: Get the version of virtio mdev device
> > > + * @mdev: mediated device
> > > + * Returns integer: version of the device
> > > + * @get_generation: Get device generaton
> > > + * @mdev: mediated device
> > > + * Returns u32: device generation
> > > + */
> > > +struct virtio_mdev_device_ops {
> > > + /* Virtqueue ops */
> > > + int (*set_vq_address)(struct mdev_device *mdev,
> > > + u16 idx, u64 desc_area, u64 driver_area,
> > > + u64 device_area);
> > > + void (*set_vq_num)(struct mdev_device *mdev, u16 idx, u32 num);
> > > + void (*kick_vq)(struct mdev_device *mdev, u16 idx);
> > > + void (*set_vq_cb)(struct mdev_device *mdev, u16 idx,
> > > + struct virtio_mdev_callback *cb);
> > > + void (*set_vq_ready)(struct mdev_device *mdev, u16 idx, bool
> > > ready);
> > > + bool (*get_vq_ready)(struct mdev_device *mdev, u16 idx);
> > > + int (*set_vq_state)(struct mdev_device *mdev, u16 idx, u64 state);
> > > + u64 (*get_vq_state)(struct mdev_device *mdev, u16 idx);
> > > +
> > > + /* Device ops */
> > > + u16 (*get_vq_align)(struct mdev_device *mdev);
> > > + u64 (*get_features)(struct mdev_device *mdev);
> > > + int (*set_features)(struct mdev_device *mdev, u64 features);
> > > + void (*set_config_cb)(struct mdev_device *mdev,
> > > + struct virtio_mdev_callback *cb);
> > > + u16 (*get_queue_max)(struct mdev_device *mdev);
> > > + u32 (*get_device_id)(struct mdev_device *mdev);
> > > + u32 (*get_vendor_id)(struct mdev_device *mdev);
> > > + u8 (*get_status)(struct mdev_device *mdev);
> > > + void (*set_status)(struct mdev_device *mdev, u8 status);
> > > + void (*get_config)(struct mdev_device *mdev, unsigned int offset,
> > > + void *buf, unsigned int len);
> > > + void (*set_config)(struct mdev_device *mdev, unsigned int offset,
> > > + const void *buf, unsigned int len);
> > > + int (*get_version)(struct mdev_device *mdev);
> > > + u32 (*get_generation)(struct mdev_device *mdev);
> > > +};
> > I'm not sure how stable above ops are.
>
>
> It's the kernel internal API, so there's no strict requirement for this. We
> will export a version value for userspace for compatibility.
Given it's tied to virtio we probably want kernel+userspace
feature bits?
>
> > Does it make sense if defining
> > just two callbacks here, e.g. vq_ctrl and device_ctrl, and then let the
> > vendor driver to handle specific ops in each category (similar to how
> > ioctl works)?
>
>
> My understanding is that it introduce another indirection, you still need to
> differ from different command, and it's less flexible than direct callback.
>
> What's the value of doing this?
>
> Thanks
>
>
> >
> > Thanks
> > Kevin
> >
More information about the dri-devel
mailing list