[PATCH v9 0/4] Xilinx ZynqMP DisplayPort Subsystem DRM/KMS driver

[Laurent Pinchart]

Hello,

Here's a new version of the Xilinx ZynqMP DisplayPort Subsystem driver.
I've taken over v8 of the series ([1]) from Hyun and addressed all the
review comments I had posted, plus quite a few additional issues (Daniel
mentioned in a private conversation that this should teach me to be less
picky during review, but I don't agree - yet :-))).

This new version brings a lot of changes. After a rebase on top of v5.3,
the driver architecture has been reworked extensively, dropping the xlnx
drm helper layer. This decision was taken due to the difficulty of
creating the right level of abstraction with a single user. The task was
made even more difficult by the fact that the xlnx drm helper layer was
meant to support display pipeline implemented fully or partly in the
FPGA programmable logic (PL), while this driver only supports the
DisplayPort Subsystem hard IP in the processing system (PS). The helper
layer will likely be brought back in the future when drivers for the PL
will be upstreamed.

Other features were also dropped, mostly because they were only partly
implemented. This includes TPG support, audio, live input (from the PL)
and async updates. They will likely be implemented in the future, as
well as color keying that was completely missing from v8.

Please see patch 2/4 for a more detailed changelog.

The series depends on currently out-of-tree DMA engine and PHY drivers
that have been posted to the corresponding mailing lists but not merged
yet. We are figuring out a plan to get those drivers (and their DT
bindings and DT integration) upstreamed. For this reason only patch 1/4
and 2/4 are candidate for upstreaming, the DT integration in 3/4 and 4/4
depends on the DMA engine and PHY.

In the meantime, a branch that contains this series on top fo the
required dependencies is available at

	git://linuxtv.org/pinchartl/media.git drm/dpsub/next

If anyone is interested, the full history of the changes between v8 and
v9 is available at

	git://linuxtv.org/pinchartl/media.git drm/dpsub/history/v5.3

[1] https://lists.freedesktop.org/archives/dri-devel/2018-July/182477.html

Hyun Kwon (2):
  dt-bindings: display: xlnx: Add ZynqMP DP subsystem bindings
  drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem

Laurent Pinchart (2):
  arm64: dts: zynqmp: Add DisplayPort subsystem
  arm64: dts: zynqmp: zcu106-revA: Wire up the DisplayPort subsystem

 .../display/xlnx/xlnx,zynqmp-dpsub.yaml       |  153 ++
 MAINTAINERS                                   |    9 +
 arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi    |    4 +
 .../boot/dts/xilinx/zynqmp-zcu106-revA.dts    |   16 +
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi        |   21 +
 drivers/gpu/drm/Kconfig                       |    2 +
 drivers/gpu/drm/Makefile                      |    1 +
 drivers/gpu/drm/xlnx/Kconfig                  |   13 +
 drivers/gpu/drm/xlnx/Makefile                 |    2 +
 drivers/gpu/drm/xlnx/zynqmp_disp.c            | 1678 +++++++++++++++++
 drivers/gpu/drm/xlnx/zynqmp_disp.h            |   43 +
 drivers/gpu/drm/xlnx/zynqmp_disp_regs.h       |  201 ++
 drivers/gpu/drm/xlnx/zynqmp_dp.c              | 1677 ++++++++++++++++
 drivers/gpu/drm/xlnx/zynqmp_dp.h              |   29 +
 drivers/gpu/drm/xlnx/zynqmp_dpsub.c           |  331 ++++
 drivers/gpu/drm/xlnx/zynqmp_dpsub.h           |   48 +
 16 files changed, 4228 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
 create mode 100644 drivers/gpu/drm/xlnx/Kconfig
 create mode 100644 drivers/gpu/drm/xlnx/Makefile
 create mode 100644 drivers/gpu/drm/xlnx/zynqmp_disp.c
 create mode 100644 drivers/gpu/drm/xlnx/zynqmp_disp.h
 create mode 100644 drivers/gpu/drm/xlnx/zynqmp_disp_regs.h
 create mode 100644 drivers/gpu/drm/xlnx/zynqmp_dp.c
 create mode 100644 drivers/gpu/drm/xlnx/zynqmp_dp.h
 create mode 100644 drivers/gpu/drm/xlnx/zynqmp_dpsub.c
 create mode 100644 drivers/gpu/drm/xlnx/zynqmp_dpsub.h

-- 
Regards,

Laurent Pinchart