[PATCH v7 1/5] dt-bindings: display: mediatek: update dsi supported chips

[CK Hu]

Hi, Jitao:

On Mon, 2019-09-23 at 13:36 +0800, CK Hu wrote:
> Hi, Jitao:
> 
> On Fri, 2019-09-20 at 17:04 +0800, Jitao Shi wrote:
> > Update device tree binding documentation for the dsi for
> > Mediatek MT8183 SoCs.
> > 
> > Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
> > Acked-by: Rob Herring <robh at kernel.org>
> 
> This version is different with previous version [1], so I think you
> should drop the 'Acked-by' tag.
> 
> [1] https://patchwork.kernel.org/patch/11081701/
> 
> Regards,
> CK
> 
> > ---
> >  .../bindings/display/mediatek/mediatek,dsi.txt    | 15 ++++++++++++---
> >  1 file changed, 12 insertions(+), 3 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> > index fadf327c7cdf..993ff079ac09 100644
> > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> > @@ -7,7 +7,7 @@ channel output.
> >  
> >  Required properties:
> >  - compatible: "mediatek,<chip>-dsi"
> > -  the supported chips are mt2701 and mt8173.
> > +  the supported chips are mt2701, mt8173 and mt8183.
> >  - reg: Physical base address and length of the controller's registers
> >  - interrupts: The interrupt signal from the function block.
> >  - clocks: device clocks
> > @@ -26,22 +26,31 @@ The MIPI TX configuration module controls the MIPI D-PHY.
> >  
> >  Required properties:
> >  - compatible: "mediatek,<chip>-mipi-tx"
> > -  the supported chips are mt2701 and mt8173.
> > +  the supported chips are mt2701, mt8173 and mt8183.
> >  - reg: Physical base address and length of the controller's registers
> >  - clocks: PLL reference clock
> >  - clock-output-names: name of the output clock line to the DSI encoder
> >  - #clock-cells: must be <0>;
> >  - #phy-cells: must be <0>.
> >  
> > +Optional properties:
> > +- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
> > +               unspecified default values shall be used.
> > +- nvmem-cell-names: Should be "calibration-data"
> > +- mipitx-current-drive: adjust driving current, should be 1 ~ 0xF
> > +

You add optional properties in this version. I would like you to
separate this part to another patch. This part looks not strong related
to mt8183 (these properties may also applied to other SoC). So I've
applied previous version in mediatek-drm-next-5.5 [1], and I've also
applied these series (except patches related to these property), so I
would like you to send another series for these properties.

[1]
https://github.com/ckhu-mediatek/linux.git-tags/commits/mediatek-drm-next-5.5

Regards,
CK

> >  Example:
> >  
> >  mipi_tx0: mipi-dphy at 10215000 {
> >  	compatible = "mediatek,mt8173-mipi-tx";
> >  	reg = <0 0x10215000 0 0x1000>;
> >  	clocks = <&clk26m>;
> > -	clock-output-names = "mipi_tx0_pll";
> >  	#clock-cells = <0>;
> >  	#phy-cells = <0>;
> > +	clock-output-names = "mipi_tx0_pll";
> > +	nvmem-cells= <&mipi_tx_calibration>;
> > +	nvmem-cell-names = "calibration-data";
> > +	mipitx-current-drive = <0x8>;
> >  };
> >  
> >  dsi0: dsi at 1401b000 {
>